http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
폐경 여성에서 출산 횟수와 당뇨병의 관련성과 모유수유 기간과의 상호작용
이선아 ( Seonah Lee ),최병호 ( Byongho Tchoe ),제세영 ( Sae Young Jae ),박상신 ( Sangshin Park ) 한국보건정보통계학회(구 한국보건통계학회) 2020 보건정보통계학회지 Vol.45 No.3
Objectives: This study aimed to determine the relationship between parity and diabetes mellitus and to examine the interaction effect of the breastfeeding period and parity on diabetes mellitus among postmenopausal women. Methods: The study was conducted on 4,053 women aged 50 or older who participated in the 5th Korea National Health and Nutrition Survey from 2010 to 2012. The parity was divided into two groups and the duration of breastfeeding was divided into three groups to be analyzed. Diabetes mellitus was defined according to a fasting blood glucose level (blood glucose level ≥126 mg/dL) or use of an anti-hypoglycemic agent or insulin. A logistic regression analysis was conducted to assess the relationship between parity and diabetes mellitus and the interaction effect of the breastfeeding period and parity on diabetes mellitus. The sociodemographic factors and health-related indicators, and women’s reproduction factors were adjusted to the model as confounding variables. Results: The relationship between parity and diabetes mellitus was statistically significant without adjusting for confounding variables (odds ratio, OR=1.73, 95% confidence interval, 95% CI=1.40-2.13, p<0.001). However, adjusting for confounding factors revealed that the relationship was not statistically significant (OR=1.08, 95% CI=0.79-1.48, p=0.633). As a result of analyzing the interaction terms between parity and breastfeeding period, the main effect of parity was statistically significant (p=0.034); but, the main effect of the breastfeeding period was not. The interaction term of the breastfeeding period and parity was statistically significant (p=0.042). Among women who breastfed for 0-6 months, those who had delivered 4-12 children had 5.56 times increased risk of diabetes mellitus compared with those who delivered 1-3 children. Conclusions: The association between parity and diabetes mellitus and the interaction between breastfeeding period and parity were statistically significant. Among women with short breastfeeding periods, the one who delivered more children had a higher risk of diabetes mellitus.
소형 UAV의 장애물 충돌 회피를 위한 YOLO 및 IR 센서 기반 장애물 크기 예측 방법
이의천(Uicheon Lee),이종원(Jongwon Lee),최의진(Euijin Choi),이선아(Seonah Lee) 항공우주시스템공학회 2023 항공우주시스템공학회지 Vol.17 No.6
UAV의 수요가 증가함에 따라 많은 충돌 회피 방법들이 제안됐다. 이러한 방법들은 LiDAR 및 스테레오 카메라를 주축으로 연구되었으나 무겁거나 공간이 부족하여 소형 UAV에 접목이 어려웠기에, 최근에는 객체 인지 모델 및 거리 측정 센서를 복합적으로 사용한 방법들이 제안되고 있다. 하지만 이러한 객체 인지 복합 방법들은 인지한 장애물의 크기 정보를 도출하지 않아 인지 초기에 적정 회피 거리 도출 및 장애물의 좌표화가 어렵다는 단점이 존재한다. 본 논문에서는 단안 카메라-YOLO와 적외선 센서 기반의 장애물 크기 예측 방법을 제안하고, 실험을 통해 40cm의 거리 내에서 86.39%의 정확도를 보임을 확인했다. 또한, 제안한 방법을 적용하여 소형 UAV에 적용하여 장애물 충돌 회피가 가능한지를 확인하였다. With the growing demand for unmanned aerial vehicles (UAVs), various collision avoidance methods have been proposed, mainly using LiDAR and stereo cameras. However, it is difficult to apply these sensors to small UAVs due to heavy weight or lack of space. The recently proposed methods use a combination of object recognition models and distance sensors, but they lack information on the obstacle size. This disadvantage makes distance determination and obstacle coordination complicated in an early-stage collision avoidance. We propose a method for estimating obstacle sizes using a monocular camera-YOLO and infrared sensor. Our experimental results confirmed that the accuracy was 86.39% within the distance of 40 cm. In addition, the proposed method was applied to a small UAV to confirm whether it was possible to avoid obstacle collisions.
요구사항 추적성 관점에서 항공기 탑재 소프트웨어 시험 사례 실패 분석
김성섭,조희태,이선아,Kim, Sung-Sub,Cho, Hee-Tae,Lee, Seonah 한국정보처리학회 2020 정보처리학회논문지. 소프트웨어 및 데이터 공학 Vol.9 No.11
항공기 탑재 소프트웨어의 비중 및 복잡성 증가에 따라, 소프트웨어 고장으로 인한 임무수행이나 기능 실패 및 성능 미달 등의 위험요인 또한 증가하고 있다. 항공기 탑재 소프트웨어처럼 미션 크리티컬 도메인의 대규모 소프트웨어에서 최소한의 기간과 비용으로 유지보수를 진행하기 위해서는 요구사항 추적관리가 필수적이다. 하지만, 개발업체에서는 개발비용이나 개발일정 등의 여러 사유로 인해 요구사항 추적관리 지침을 정확히 준수하지 못하고 있으며, 체계적으로 추적성 수립 활동을 수행하기란 쉽지 않다. 논문에서는 체계적인 추적성 수립 활동의 부재에 따른 요구사항 추적성 실패사례가 실제로 존재하는지 항공분야 소프트웨어의 실제 시험사례를 요구사항 추적성 관점에서 분석하고, 추적성 실패사례의 유형과 사안 경중에 따른 위험을 확인한다. 총 7개의 항공기 탑재 소프트웨어를 대상으로 분석을 진행한 결과, 실패사례는 총 3가지 유형인 요구사항 누락, 요구사항-시험절차 연계부족, 시험절차 누락으로 나눌 수 있었다. 실패사례는 총 18건으로 각 유형별 6건씩 있었으며, 각 사안에 따른 Risk는 High, Middle, Low 순으로 각각 1건, 13건, 4건으로 중간 수준의 위험이 가장 많았다. As the proportion and complexity of software embedded in aircraft increase, risk factors such as mission failure, function failure and performance failure due to software errors also increase. In the mission-critical software systems such as aircraft software, managing requirement traceability is essential to maintain the software systems with minimal period and cost. However, the development company is not accurately complying with the guideline for managing requirement traceability due to various reasons such as development cost and schedule. Therefore, it is not easy to systematically establish and maintain requirement traceability. In the paper, we analyze actual test cases of aviation software systems from the viewpoint of requirements traceability in order to learn if there are failure cases of test cases due to the absence of systematic traceability management activities. We also check the risks associated with the failure cases according to the type and severity of the cases. As a result of analyzing a total of 7 aircraft-mounted software, failure cases could be divided into three types: omission of requirements, lack of connection between requirements and test procedures, and omission of test procedures. There were a total of 18 failure cases, 6 for each type. The numbers of high, middle and low risks were 1, 13 and 4, respectively, where the number of middle risks is largest.
요구사항 추적성 매트릭스에서 유연한 맵핑 변경을 가능하게 하는 스프레드시트 애플리케이션
정세린 ( Serin Jeong ),이선아 ( Seonah Lee ) 한국정보처리학회 2018 정보처리학회논문지. 소프트웨어 및 데이터 공학 Vol.7 No.9
요구사항 추적성은 개발과 유지보수 과정 동안 지속적으로 관리해야 한다. 그러나, 실제에서는 품질 보증을 점검하는 단계에서 갱신한다. 이러한 차이는 개발자가 추적성을 갱신하는 노력에 비해 추적성을 통해 얻는 혜택이 적기 때문이다. 이러한 노력 대비 보상의 관점에서 우리는 일반적으로 사용하는 스프레드시트 형태의 요구사항 추적성 매트릭스에서 맵핑을 유연하게 바꿀 수 있는 방법을 제안한다. 제안의 목적은 개발자가 요구사항 추적성을 갱신하는데 들이는 노력을 줄이는 것이다. 제안 방법은 먼저, 각 시트에 두 산출물 간의 관계만을 기입하여 변경이 발생할 때, 개발자가 변경된 맵핑을 즉시 반영할 수 있도록 한다. 다음, 개발자가 원하는 시점에서 제안 방법은 자동적으로 모든 산출물의 관계를 계산하여 추적성 매트릭스를 생성한다. 또한 누락된 맵핑 관계를 색상으로 표시하고 척도를 계산하여 개발자가 추적성 매트릭스의 완전성을 파악하도록 돕는다. 우리는 제안 방법의 적용가능성을 파악하기 위하여 사례 연구를 수행하였다. 사례 연구는 제안한 요구사항 추적성 매트릭스가 실제 프로젝트에 적용 가능하며 변경된 맵핑 관계를 쉽게 수용함을 보여준다. Requirement traceability should be continuously maintained in software development and evolution. However, it is usually updated in practice in the quality assurance phase. The gap between “is” and “should” exists due to the fact that developers must invest considerable effort to update requirement traceability while being able to obtain only marginal benefit from the updated traceability. To close this gap, we propose a spreadsheet application that enables developers to flexibly change mappings in a requirement traceability matrix. In this way, developers can reduce their effort in updating the requirement traceability matrix, but still obtain the common form of a requirement traceability matrix on a spreadsheet. The proposed application maintains the mappings between two artifacts on each sheet so that, whenever an artifact item changes, developers can instantly insert the relevant mapping changes. Then, when developers desire the common form of a requirement traceability matrix, the proposed application calculates the mappings among several artifacts and creates the matrix. The application also checks traceability errors and calculates the metrics so that developers can understand the completeness of the matrix. To understand the applicability of the proposed approach, we conducted a case study, which shows that the proposed application can be applied to the real project and easily incorporate the mapping changes.