http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유류오염토의 마이크로파 처리 시 토양의 함수율 변화에 따른 BTEX 제거특성에 관한 연구
하상안,염혜경,유미영,Ha, Sang-An,Yeom, Hae-Kyong,Yu, Mi-Yong 한국지하수토양환경학회 2007 지하수토양환경 Vol.12 No.2
토양복원의 기술로 마이크로파를 이용할 시 휘발성물질((PAH)s 등)) 및 준휘발성((PCB)s 등) 물질 등을 처리하는데 효과적인 것으로 알려져 있다. 본 연구에서는 휘발성 물질인 BTEX를 마이크로파를 이용하여 수분변화 및 전력변화에 따른 제거특성을 연구하였다. 10%, 20%, 30%, 50%의 함수율 변화에 따른 BTEX 제거율은 20%일 때가 제거율이 가장 높음을 제거상수를 통해 도출할 수 있었으며, 전력의 변화에 따른 BTEX 제거율 및 제거율에 도달하는 시간은 비슷한 것으로 나타났다. 각각 다른 함수율이 마이크로파 처리 시 한계함수율에 도달하는 시간을 측정한 결과, 한계함수율에 도달하는 시간은 함수율이 10%, 20%, 30%일 때는 2 kW와 4 kW는 큰 차이가 없음을 알 수 있었고, 함수율이 50%일 경우는 한계함수율에 도달하는 시간이 4kW가 더 빠른 것으로 나타났다. 수분함수율에 따른 최적전력을 도출하면 수분함량이 $10{\sim}30%$ 시 2 kW가 경제적으로 나타났으며, 함수율이 50% 일 경우는 전력이 4 kW일 때 경제적인 것으로 나타났다. This study has been focused on an application of microwave pre-treatment of soil contaminated with volatile organic chemicals, and BTEX(benzene, toluene, ethylene, xylene). Microwave experiments were carried out under different power conditions (2 kW, 4 kW) using different moisture contents and BTEX concentration. According to these results of this study, the most BTEX removal efficiency was with 20% moisture contents regardless of electric power. The result show that 2kW was determined to the optimum electric power at $10{\sim}30%$ moisture contents, but the optimum power was 4 kW at 50% of moisture content.
하상안(Sang An Ha),염혜경(Hae Kyong Yeom) 大韓環境工學會 2007 대한환경공학회지 Vol.29 No.8
본 연구 목적은 유류오염토의 TPH(석유계 총탄화수소) 및 BTEX(벤젠, 톨루엔, 에틸렌, 크실렌)를 제거하기 위해 저온 열탈착 공법을 사용하였다. 열 탈착 기술은 오염원의 종류나 농도에 관계없이 단기간에 완전처리가 가능하며, 공정의 신뢰도가 높아 현장처리 적용이 용이한 공정으로 잘 알려져 있다. 본 연구에서 저온 열탈착 공법의 온도범위와 체류시간을 결정하기 위해 TGA 곡선을 통하여 도출하였다. 기초실험을 통해 도출된 온도범위인 300∼500℃ 범위에서 BTEX 및 TPH의 농도변화를 실험한 결과, BTEX는 300℃ 운전 시 5분 내에 완전히 제거되는 것으로 나타났으며, TPH의 경우, 300℃ 운전 시 65%의 제거율을 나타냈으며, 500℃ 운전 시에는 70% 이상의 제거율을 나타냈다. 그러나 체류시간에 따른 TPH 제거율은 크게 나타나지 않았다. The objective of this study is to remove BTEX(Benzene, Toluene, Ethylene, Xylene) and TPH(Total Petroleum Hydrocarbon) effectively by using method low thermal desorption. The thermal desorption is frequently selected because it can treat various contaminants effectively. The temperature and heating time are determined by TGA(Thermogravimetric analysis) curve. The experiment result from this research, removal rate of BTEX was up to 100% within 5 minutes and removal rates of TPH were more than 65% at 300℃ and 70% at 500℃ respectively. It was observed that there was a little change of removal rates of TPH.