http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A Highly Reliable Self-powered Intruder Identification System using Piezoelectric Composite Films
Venkateswaran Vivekananthan(벤카테스와란 비베카난단),Nagamalleswara Rao Alluri(나가 말레스와라 라오 알루리),Yuvasree Purusothaman(유바스리 푸루소다만),Nirmal Prashanth Maria Joseph (니르말 프라샤츠 마리아 조세프라),Arunkumar Chandrasekhar(아룬쿠마르 찬 대한기계학회 2019 대한기계학회 춘추학술대회 Vol.2019 No.2
아룬 쿠말,앤서니 클로버 한국실험동물학회 2015 Laboratory Animal Research Vol.31 No.4
Procedures involving complex surgical techniques in rats, such as placement of abdominal aortic graft require extended duration of surgical anesthesia, which often can be achieved by repeated administrations of xylazine-ketamine combination. However such repeated anesthetic administration, in addition to being technically challenging, may be associated with potential adverse events due to cumulative effects of anesthesia. We report here the feasibility of using urethane at low dose (~1/10 the recommended anesthetic dose) in combination with a xylazine-ketamine mix to achieve an extended duration of surgical anesthesia in rats. The anesthesia induction phase was quick and smooth with an optimal phase of surgical anesthesia achieved for up to 90 minutes, which was significantly higher compared to that achieved with use of only xylazine-ketamine combination. The rectal temperature, heart rate and respiratory rate were within the physiological range with an uneventful recovery phase. Post surgery the rats were followed up to 3 months without any evidence of tumor or any other adverse effects related to the use of the urethane anesthetic combination. We conclude that low dose urethane can be effectively used in combination with xylazine and ketamine to achieve extended duration of surgical anesthesia up to 90 minutes in rats.
4차 암모늄 양이온을 포함하는 폴리에테르술폰 블록 고분자 기반 음이온 교환막 소재
아룬 쿠마르 모한티,백현종,김노원 한국막학회 2017 한국막학회 총회 및 학술발표회 Vol.2017 No.05
A class of phenolphthalein anilide based poly(ethersulfone) (PES) block copolymers containing pendent quaternary ammonium (QA) groups was prepared as anion exchange membranes by reaction involving nucleophilic substitution, benzylic bromination, quaternization and anion exchange with hydroxide ions. Hexafluorobenzene (HFB) was utilized as a linkage group between the hydrophobic and hydrophilic oligomer blocks. Nano-phase separated membrane morphology due to block structure of poly (ethersulfone) serves for better management of absorbed water for higher hydroxide conductivity with good thermal, and dimensional stability. The water uptake, swelling ratio, conductivity, and chemical stability of the copolymer membranes were comparatively investigated.
시트 백 프레임 적용 1180 MPa 급 강판 아크 플러그 용접부 적용 솔리드 와이어 종류에 따른 접합부 미세조직 및 파단특성 비교
박영도,아룬 랄라찬,김두영,공호영 대한용접·접합학회 2021 대한용접학회 특별강연 및 학술발표대회 개요집 Vol.2021 No.11
최근 전기자동차의 보급이 확대 및 차량 경량화를 위한 차체 및 샤시 부품 고강도 강판의 적용이 증가함에 따라 자동차 시트 부품 중 충돌 강성이 요구되는 백 프레임에 적용 된 기존 아크플러그 용접의 용접부 불량에 따른 차량 내구성 저하가 큰 문제가 되고 있다. 또한 기가급 고강도 강판을 시트 백 프레임에 적용이 검토되면서 아크 플러그 용접부에 기존 연강 및 50 Kg급 고장력강용 솔리드 와이어 적용 시 용접부 품질 및 고강도 와이어 적용 필요 여부 등에 대한 연구가 요구되며 이에 따른 용접부 물성 비교 평가가 요구되었다. 적용된 용접와이어는 AWS 규격의 ER-70S 및 ER-110R 두가지이며 440 MPa급 부터 1180 MPa급 강재에 6.0 mm 직경의 원형 플러그 용접을 각각 적용 후 용접부 기계적 특성 및 전단인장 시험 후 파단특성을 평가하였다. 590 MPa급 이상의 강재에서는 고강도 ER-110 와이어 적용 시 약 1.0 kN 전후의 전단인장 강도의 증가가 확인되었으나 파단위치는 ER-70 와이어의 경우 용착 금속부에서 발생 한 반면 ER-110 와이어의 경우 모두 조대열영향부로 파단 위치가 변경되었다. 따라서 원형 아크 플러그 용접의 경우 전단인장 시험 시 전단인장 하중 방향의 원형 용접부 국부적인 위치에서 응력 집중이 발생하므로 기가급 강재의 경우 고강도 와이어 적용 시 용착금속부의 경도가 증가하여 전단인장 시험 시 응력집중을 지탱 가능하므로 파단이 대부분 열영향부에서 발생하는 것으로 판단된다.
1180MPa급 강판 대상 점용접 및 레이저 용접 대체를 위한 다양한 아크 플러그 형상 용접부 접합강도 및 접합특성 비교 연구
박영도,김두영,아룬 랄라찬,공호영,김경영,신지영,허민 대한용접·접합학회 2021 대한용접학회 특별강연 및 학술발표대회 개요집 Vol.2021 No.5
Advanced high strength steels have been used in automotive structures due to their superior mechanical properties. Lap joining of these sheets can be done using different welding processes. In this study lap joining of 1180 MPa steel sheet of thickness 1.0 mm was done using resistance spot welding (RSW), Arc plug welding and Laser welding processes. To have a comparative evaluation between the resultant welds, similar effective interfacial weld size was obtained for all joining and tensile shear performance of the welds was conducted. Resistance spot welding was found to be more productive with highest mechanical properties among all processes for welding 1180 MPa steel sheets. Additionally, the lap shear fracture modes of these joints were analyzed and joint characteristics that affecting the fracture behavior was discussed.