http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
하대정맥 손상후 일차봉합술로 인해 발생한 버드-키아리 증후군 환자를 혈관성형술로 치료한 증례보고
심주현 ( Joo Hyun Sim ),원제환 ( Je Hwan Won ),정경원 ( Kyoung Won Jung ),이국종 ( Cook John Lee ),김영환 ( Young Hwan Kim ) 대한외상학회 2014 大韓外傷學會誌 Vol.27 No.4
Budd-Chiari syndrome is an uncommon condition characterized by hepatic outflow obstruction. Direct suture of the injured Inferior vena cava in a patient with blunt hepatic trauma also may cause an equivalent condition. However, early diagnosis is possible with common symptoms and radiologic evaluation. Moreover, a transluminal approach with balloon angioplasty could prevent long-term complications of Budd-Chiari syndrome without repeated abdominal surgery. [ J Trauma Inj 2014; 27: 196-200 ]
CEDI 공정에 의한 질산성질소 처리시 이온교환수지의 영향
심주현(Joo Hyun Sim),서형준(Hyung Joon Seo),강세한(Se Han Kang),유근우(Kun Woo Yu) 大韓環境工學會 2007 대한환경공학회지 Vol.29 No.11
CEDI(Continuous Electrodeionization)의 희석구역에서의 양이온과 음이온교환수지의 비율은 일반적으로 당량비에 의해 조절되어 진다. 그러나 이온교환수지의 비율 변화 및 선택적수지 적용에 대해서는 현재까지 연구되지 않았다. 본 연구의 목적은 저농도의 질산성질소를 CEDI 공정으로 처리시 이온교환수지 특성 중 수지 부피비율 변화 및 선택성수지가 공정에 미치는 영향을 조사하는데 있다. CEDI 실험에 사용된 양이온교환수지는 SP112H(강산성수지, Bayer Korea Inc.)이고, 음이온교환수지는 M800(강염기성수지, Bayer Korea Inc.)과 SR7(선택적수지, Bayer Korea Inc.)이다. CEDI 실험 결과, M800의 경우 유입수와 같은 당량비의 수지 부피비율 5 : 5 (cation exchange resin:anion exchange resin, CER:AER, SP112H와 M800의 당량비가 거의 유사하므로 수지의 당량비가 곧 수지의 부피 비와 같다.)보다 2 : 8(CER:AER, resin volume ratio)에서 더 좋은 결과를 나타내었다. 희석효율은 약 3%P, 농축효율은 약 16%P 높아졌고, 투입에너지당 희석 및 농축효율은 1.3, 7.1%P/Wh 높은 결과를 보였다. SR7의 경우 수지 유입수와 같은 당량비의 수지 부피비율인 3 : 7(CER : AER, SP112H와 SR7의 당량은 각각 1.6, 0.6 eq/L이다.)과 유사한 2 : 8(CER : AER)에서 가장 좋은 결과를 보였다. 하지만 선택적 수지의 경우 높은 적용전압이 요구되는 문제점이 나타나기도 하였다. 따라서 CEDI 공정 적용시 대상물질의 성상에 따라 가장 좋은 효율을 보이는 수지 비율을 선정하는 것이 중요한 인자로 적용될 것으로 생각된다. The anion to cation exchange resin ratio was generally adjusted to equivalence in the diluted compartment of CEDI(Continuous Electrodeionization). But the change of the ion exchange resin ratio and application of selective resin have been scarcely studied so far. The purpose of this study is to examine the effect of change of the ion exchange resin volume ratio and application of selective resin on the treatment of low concentration nitrate by CEDI process. SP112H resin used by CEDI is strong-acid exchange resins(Bayer Korea Inc.). And M800 and SR7 resin are strong-base, selective exchange resins(Bayer Korea Inc.) respectively. As a result of the CEDI process, the efficiency of 2 : 8 volume ratio(cation exchange resin : anion exchange resin, CER : AER) is better than 5 : 5(CER : AER, equivalence of SP112H and M800 are almost same) of which equivalence ratio is same to influent in the M800. In the case of M800, diluted and concentrated efficiencies were increased to about 3%P, 16%P respectively. And diluted and concentrated efficiencies per the inputted energy were increased to about 1.3%P/Wh, 7.1%P/Wh respectively. In the case of SR7, the best efficiency is to volume ratio of 2 : 8(cation exchange resin:anion exchange resin, CER : AER) which is similar to 3 : 7(CER : AER, equivalences of SP112H and SR7 are 1.6, 0.6 eq/L, respectively). But it was the problem that high applied voltage is required to selective resin. Therefore, it is important to choose resin ratio where efficiency is the best with property of influent among the various resin ratio by CEDI process.
전기화학적공정에서 질산성질소 제거효율 향상에 관한 연구
심주현(Joo Hyun Sim),강세한(Se Han Kang),서형준(Hyung Joon Seo) 大韓環境工學會 2008 대한환경공학회지 Vol.30 No.2
본 연구에서는 다단계 전기화학적 반응기를 이용하여 환원제의 투입, 전극의 종류, 수리학적 체류시간(HRT: Hydraulic Retention Time) 및 전류밀도 변화에 따른 질산성질소의 제거효율을 살펴보았다. 실험결과, 환원제 투입은 질산성질소 제거효율을 증가시켰으며 에너지투입량은 감소시켰다. 전극종류를 변화시켰을 경우, 질산성질소 제거효율 및 전류효율의 차이는 거의 없었으나 Zn 환원제의 회수를 위해 B-type(1단: Pt-Zn, 2단: Pt-Zn, 3단: Pt-Zn, 4단: Pt-Zn)을 선정하였다. 수리학적 체류시간 변화실험에서는 수리학적 체류시간과 무관하게 동일전류밀도를 공급한 실험과 수리학적 체류시간 변화에 따른 전류밀도 변화 실험 즉, 단위부피당 동일 전류량 공급 실험을 진행하였다. 실험 결과, 수리학적 체류시간과 전류밀도 변화에 의해 농도분극현상과 적용전류량의 부족현상이 발생하게 된다. 즉 수리학적 체류시간이 감소할수록 농도분극현상은 감소하지만 단위 부피당 적용전류량이 부족하게 된다. 따라서 수리학적 체류시간과 전류밀도 실험을 통해 적절한 운전조건을 도출할 수 있으며, 내부 스페이서의 설치로 확산을 증가시킬 경우 질소제거효율 및 에너지효율이 증가될 수 있을 것으로 예상된다. In this study, the nitrate removal efficiency was examined under a variety of operating conditions, such as different doses of the reducing agent, different electrode types, different HRTs(hydraulic retention times), and different current densities, using the multistep electrochemical process. The nitrate removal efficiency increased and the input energy decreased when the reducing agent was used, and almost no difference was found between the electrode types in terms of their nitrate removal efficiency and current efficiency. So that the Zn reducing agent could be recovered, though, the B-type electrode was chosen(step 1: Pt-Zn; step 2: Pt-Zn; step 3: Pt-Zn; step 4: Pt-Zn). HRT experiments were carried out on constant electric current density unrelated HRTs and various electric current density related HRTs: the constant amount of electric current per unit volume. As a result, HRT and the electric current density caused concentration polarization and the lack of an applied current. That is to say, the lower the HRT, the greater the decrease in concentration polarization and in the amount of applied current per unit volume. Therefore, optimal conditions were found through the experiments that were conducted on HRT and electric current density. When a spacer was installed in the process, the nitrate removal efficiency and energy efficiency increased even more because the diffusion likewise increased.