점토광물(맥반석) 및 규산질비료시용이 수도의 생육 및 수량에 미치는 영향

심재성,Sim, Jae-Seong 배재대학교 자연과학연구소 1992 自然科學論文集 Vol.5 No.1

맥반석을 벼에 시용하였을 때 벼의 초장 및 분벽경수 는 증가하였고 건물율 및 근발생율도 증가 하였다. 맥반석을 시용함으로서 벼의 초장이 6~9cm정도 단간화되었으며 총분벽경수 및 유효분벽경수도 현저하게 증가하였다. 벼의 정조중에 있어서는 맥반석 100kg시용구에서 무처리구보다 19.9%가 더 증수되었고 500kg 시용구에서는 15.5%가 증수되어 시용량에 관계없이 맥반석은 벼의 수량증가에 효과적이었다.

질소시용, 예초 및 재식밀도가 한국잔디(Zoysia Japonica Steud)의 생육에 미치는 영향

심재성,Sim, Jae-Seong 배재대학교 자연과학연구소 1987 自然科學論文集 Vol.1 No.-

The increasing emphasis placed on the production of fine turf for lawns, golf courses, parks, and other recreational sites has led to many unsolved problems as to how such turf could be best established and mainteined. For this purpose, a series of experiments were conducted under con ditions of pot and field. The results obtained were as follows EXPERIMENT I. The effect of nitrogen fertilizer and clipping interval on Zoysia japonica. 1. Increasing the rate of nitrogen and frequent clipping increased tiller number of Zoysis japonica and the maximum number of tillers were obtained from 700 kg N application and freqnent clippings (10 days interval ) in October. Treatment of 350kg N with 10 days clipping interval increased tillers much more than those of 700 kgN with 20 and 30 days clipping intervals. 2. The average number of green leaves occurred during the growth period maximized by applying 700 kg N and clipping 10 days interval. 3. Increasing tiller numbers significantly decreased tops DM weight per tiller by clipping plants at interval of 10 and 20 days, irrespective of nitrogen applied, and with nil N, at the interval of 30 days. By applying 700 kg N, however, top DM weight per tiller increased as the number of tillers increased consistently. 4. The highest top DM weight was achieved from late August to early September by applying 350 and 700kgN. 5. During the growth period, differences in unders ( stolon + root ) DM weight occurred bynitrogen application were found between nil N and two applied nitrogen levels, whereas, at the same level of nitrogen applied, the increase in stolon DM weight enhanced by lengthening the clipping interval to 30 days. 6. Nitrogen efficiency to green leaves, stolon nodes and DM weight of root with high nitrogen was achieved as clipping interval was shortened. 7. By increasing fertilizer nitrogen rate applied, N content n the leaves and stems of Zoysiajaponica was increased. On the other hand, N content in root and stolon had little effect onfertilizer nitrogen, resulting in the lowest content among plant fractions. The largest content of N was recorded in leaves. Lengthening the clipping interval from 10 or 20 to 30 days tends to decrease the N content in the leaves and stems, whereas this trend did not appeared in stolon androot. 8. A positive correlations between N and K contents in tops and stolon were established andthus K content increased as N content in tops and stolon increased. Meanwhile, P content was not affected by N and clipping treatments. 9. Total soluble carbohydrate content in Zoysia japonica was largest in stolon and stem, and was reduced by increasing fertilizer nitrogen rate. Reduction in total soluble carbohydrate due to increased nitrogen rate was severer in the stolons and stems than in the leaves. 10. Increasing the rate of nitrogen applied increased the number of small and large vascular bundles in leaf blade, but shortened distance among the large vascular bundles. Shortening the clipping interval resulted in increase of the number of large vascular bundles but decrease ofdistance between large vascular bundles.EXPERIMENT II. Growth response of Zoysia japonica imposed by different plant densities. 1. Tiller numbers per unit area increased as plant density heightened. Differences in num ber between densities at higher densities than 120 D were of no significance. 2. Tiller numbers per clone attained by 110 days after transplanting were 126 at 40D,77 at 80D, 67 at 120D, 54 at 160D, and 41 at 200D. A decreasing trend of tiller numbers per clone with increasing density was noticable from 100 days after transplanting onwards. 3. During the growth period, the greatest number of green leaves per unit area were attainedin 90days after transplanting at 160D and 200D, and 100 days after transplanting at 40D, 80Dand 120D. Thus the period to reach the maximum green leaf number with the high plantdensity was likely to be earlier that with the low plant density. 4. Stolon growth up

발명의 날 수상자 인터뷰-은탑산업훈장 수훈자

심재성,Sim, Jae-Seong 한국발명진흥회 2006 發明特許 Vol.31 No.5

농업전문대학을 통한 적정기술의 보급방법

심재성,Sim, Jae-Seong 한국과학기술단체총연합회 1984 과학과 기술 Vol.17 No.10

이 논문은 지난 813-14일 까지 한국농어촌문제연구회와 한국과학기술단체총연합회가 유네스코 후원으로 공동주최한 농어촌문제세미나에서 발표된 것이다.

중 ㆍ장기경영전략계획에서의 수요예측

심재성,Sim, Jae-Seong 한국레미콘공업협회 1985 레미콘 Vol.6 No.-

Color Change on the Titanium-Based Orthodontic Brackets by Acetic NaF Solutions

Jae-Seong Sim(심재성),Ju-Hee Lee(이주희),Hyo-Joung Seol(설효정),Hyung-Il Kim(김형일),Yong Hoon Kwon(권용훈) 대한치과재료학회 2011 대한치과재료학회지 Vol.38 No.4

비료의 장기연용이 벼의 생육, 수량 및 미립발달에 미치는 영향

한희석,심재성,Han, Hui-Seok,Sim, Jae-Seong 배재대학교 자연과학연구소 1992 自然科學論文集 Vol.5 No.1

토양에 20년간 3요소+생고를 처리하였을때 토양의 화학적 성분, 공극율, 입단구조가 잘 발달되었다. 또한 이 처리에 의하여 CGR은 영화분화기때 가장 높았으나 무처리구나 3요소단용구에서는 전생육기간을 통하여 계속 증가하는 경향을 띈 반면 3요소+생고처리구에서는 영화분화기이후 계속 감소 하는 추세을 나타내고 있다. 현미수량에 있어서는 3요소+생고처리에 의하여 11%의 증가효과가 있었으며 이것은 주로 이삭의 일.이차기경의 분화수가 증가하였기 때문이었다. 또한 미립형태에 있어서도 완전미의 비율이 높았는데 이것은 등숙속도와 매우 밀접한 관계가 있어서 등숙속도가 빠를수록 심백미, 복백미 및 동할미가 많았다. 3요소 + 생고속도는 40DAH이었다.

벼 흰잎마름병 포장저항성 검정방법 체계 확립+

이두구,심재성,Lee, Du-Gu,Sim, Jae-Seong 배재대학교 자연과학연구소 1995 自然科學論文集 Vol.7 No.-

본 연구는 벼 흰잎마름병 포장저항성 검정방법 체계확립을 위해 25개 품종에 대하여 진성저항성검정, 2차감염검정, 2차전염검정 및 상습지현지검정을 실시한 결과는 다음과 같다. 1. 공시한 25개 품종에 대한 진성저항성 검정결과 (1)섬진벼등 13개 품종은 HB9011균에 저항성인 품종군으로, (2)풍산벼등 5개 품종이 HB9022균에 저항성인 품종으로, (3)삼강벼 등 2품종은 HB9011, HB9022, HB9033균에 저항성인 품종군으로 (4)운봉벼 등 12개 품종이 접종균 모두에 이병성인 품종군으로 각각 분류되었다. 2. 2차감염검정결과 HB9011균에 대해서는 영덕벼 등 3품종이, HB9022에 대해서는 태백벼 등 3품종이, HB9033에 대해서는 태백벼가 진성저항성 검정 결과와 상이한 반응을 보였다. 3. 25개 품종에 대한 2차전염검정 결과와 2차감염검정 결과는 각 균주에 대해 상관계수가 각각 0.972, 0.894, 0.919로 나타나 거의 일치하는 경향이었다. 4. 진성저항성검정 결과와 상습지검정 결과 사이에는 상관계수가 각 균주에 대해 각각 0.203, 0.460, 0.591로 나타났는데 상습지현지검정 결과는 운봉벼, 추청벼, 영덕벼가 진성저항성 검정시는 이병성 품종군으로 분류되었으나 동일 품종군내에서도 품종간 차이가 많았다. 5. 4가지 검정결과는 발병지수로 나타내기 위해 각 검정방법별로 지수 25를 부여하여 전체합이 100이 되도록 하였다. 발병지수가 15이하이면 포장저항성이 있다고 판정할 수 있는데, 각 검정방법을 통해 나타난 결과를 종합해보면 서해벼, 화진벼, 영덕벼, 풍산벼 등 4품종이 발병지수 15 이하로 나타나 포장저항성 품종으로 선발되었다. To establish the simple and practical test method of estimating resistance of rice varieties against rice leafblight, trials were made to correlate among the four test methods such as true resistance test,secondaryinfection test, secondary epidemic test and field test. The results obtained through the experiment on 25 ricevarieties and 3 pathogenic isolates designated to HB9O11, HB9022 and HB9033 can be summarized asfollows. 1 .Based on the results of true resistance test, 25 rice varieties can be classified into four groups:1 )Samgang variety group ;resistant to HB9011, 13 varieties, 2)Pungsan variety group ; resistant to HB9011 and HB9022, 5 varieties, 3)Samgang variety group ; resistant to all three isolates, 2 varieties, 4)Unbongvariety group: sensitive to all three isolates, 12 varieties. 2. The responses of rice varieties to isolates showed some discrepancies among on the test methods. These examples were found in 3 varieties including Yeongdeog varieties to HB9011, 3 varieties including Taebaeg variety to HB9022 and Taebaek vaieties to HB9033. 3. Correlation coefficiences between the secondary infection test and the secondary epidemic test for HB9011, HB9022 and HB9033 were 0.972, 0.894 and 0.919, respectively. It suggests that the two methods are not significantly different so that one of the two methods are not significantly different so that one of the two methods can be omitted from resistant test without affecting the result. 4. Between the true resistance test and the field test at the disease common area, there were no significant correlations. Unbong, Chucheong and Yeongdeog varieties are appeared as resistant varieties in the true resistant test, but their responses in the field test were different and appeared as sensitive varieties. 5. The disease index was used to express theresults from four test methods. The disease index was calculated as the sum of each numerical values of theresults from the four test methods by giving the same weights(0 to 25)to each test method. If the disease index for certain variety is less than 15, then the variety is considered to be resistant. 4 varieties such as Seohae, Hwajin, Yeongdeog and Pungsan varieties-disease indices were less than 15 were selected as field resistance varieties.

열처리 효과가 질소이온주입후에 성장시킨 산화막의 $Q_{BD}$ 특성에 미치는 영향

남인호,홍성인,심재성,박병국,이종덕,Nam, In-Ho,Hong, Seong-In,Sim, Jae-Seong,Park, Byeong-Guk,Lee, Jong-Deok 대한전자공학회 2000 電子工學會論文誌-SD (Semiconductor and devices) Vol.37 No.3

실리콘 기판에 질소를 이온주입한 다음에 게이트 산화막을 2nm, 3nm, 4nm 두께로 성장시켰다. 질소이온주입 에너지는 25keV로 고정하였고 이온주입량은 5.0×10/sup l3//cm/sup 2/과1.0×10/sup 14//cm/sup 2/으로 나누어서 진행하였다. 질소이온주입량과 산화막의 성장률은 밀접한 관계가 있으며 질소이온주입량이 많아지면 산화막의 성장시간이 늘어난다. 같은 두께를 기르는데 필요한 산화시간을 질소이온주입을 하지 않은 경우와 비교하면 질소이온 주입량이 5.0×10/sup 13//cm/sup 2/ 일 때는 약 20%, 1.0×10/sup 14//cm/sup 2/일 때는 약 50% 정도 산화시간이 증가한다. 질소이온 주입량이 증가함에 따라 Q/sub BD/값은 감소하는데 이의 개선을 위해 질소이온주입후에 N/sub 2/분위기에서 850℃ 60분간 열처리를 한 다음 산화막을 성장시키면 Q/sub BD/값이 증가하여 개선됨을 보인다. 이것은 질소이온주입으로 인한 손상이 게이트 산화막의 신뢰성에 나쁜 영향을 미치지만 이온주입직후에 적절한 열처리 공정을 거치면 이러한 손상으로 인한 영향을 없앨 수 있다는 것을 의미한다. Ultra-thin gate oxide was grown on nitrogen implanted silicon substrates. For nitrogen implantation, the energy was fixed at 25keV, but the dose was split into 5.0$\times$10$^{13}$ /c $m^{2}$ and 1.0$\times$10$^{14}$ /c $m^{2}$. The grown gate oxide thickness were 2nm, 3nm and 4nm. The oxidation time to grow 3nm was increased by 20% and 50% for the implanted wafers of 5.0$\times$10$^{13}$ /c $m^{2}$ and 1.0$\times$10$^{14}$ /c $m^{2}$ doses, respectively, when it was compared with control wafers which were not implanted by nitrogen. The value of charge-to-breakdown ( $Q_{BD}$ ) is decreased with increasing nitrogen doses. If an annealing process( $N_{2}$, 85$0^{\circ}C$, 60min.) is peformed after nitrogen implantation, $Q_{BD}$ is increased. It is indicated that nitrogen implantation damage affect gate oxide reliability and the damage can be removed by post-implantation annealing process.

포세린 소성시 냉각속도에 따른 PFM용 금합금의 경도와 미세구조의 변화

설효정(Hyo-Joung Seol),심재성(Jae-Seong Sim),조미향(Mi-Hyang Cho),박미경(Mi-Gyoung Park),권용훈(Yong Hoon Kwon),김형일(Hyung-Il Kim) 대한치과재료학회 2011 대한치과재료학회지 Vol.38 No.1