http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Direct Georeferencing을 이용한 도화 정확도 분석
송연경,이재원,Song Youn-Kyung,Lee Jae-One 한국공간정보학회 2005 한국공간정보학회지 Vol.13 No.1
In order to carry out aerial photogrammetry using GPS/INS, it is necessary to apply exterior orientation parameters, obtained while making a photo, to the editing process. It should be noted that the verification process of aerial mapping result is the most crucial process at the GPS/INS based digital photogrammetry. To this end, this study has compared the mapping result by the ways of AT results, plotter, and orientation, which is from basis of the Analytical raw map produced by the existing AT results. When comparing the horizontal and vertical accuracy of the analytical mapping with that of digital restitution, it could be found that the latter is more accurate than that of the former. In addition, it was reveled that the horizontal error was bigger than that of vertical one. Even though the accuracy of the GPS/INS based AT Direct orientation was three times poorer than the of indirect one, it was recognized that the photogrammetry process was effectively performed in the application of scale 1:5000 mapping with satisfying the allowance errors. GPS/INS에 의한 항공사진측량을 이용하려면 사진촬영과 동시에 획득한 외부표정요소의 결과를 도화$\cdot$편집 작업에 실제로 적용해 보아야 한다. 도화성과의 검증작업은 GPS/INS의 결과를 이용하여 수치지도의 제작시 가장 중요한 공정에 해당한다 이를 위하여 기존 AT성과에 의하여 제작된 해석도화원도를 기준으로 본 연구에서 제시한 AT성과별, 도화기별, 표정방식별로 수행한 도화결과를 비교하였다 AT성과와 표정방법에 상관없이 해석도화와 수치도화의 평면과 표고의 오차를 비교하여 보면, 해석도화가 수치도화보다 우수한 결과를 보여주며, 또한 평면오차가 표고오차보다 더 크게 나타남을 알 수 있었다. GPS/INS AT의 Direct 표정의 경우 InDirect 표정방법에 비해 3배 이상의 오차가 발생하였으나 모든 경우의 결과가 허용오차를 충족하고 있으므로 축척 1:5000에서는 GPS/INS AT를 이용한 표정과 도화작업은 매우 효율적으로 수행될 수 있음을 알 수 있었다.
송연경,Song Youn-Kyung 한국공간정보학회 2005 한국공간정보학회지 Vol.13 No.1
최근에는 항측기에 GPS/INS 장비를 탑재하여 사진의 촬영과 동시에 외부표정요소를 직접 결정할 수 있는 Direct Georeferencing기술의 개발로 인하여 지상기준점을 최소로 측량하거나 생략이 가능하게 되었다. Direct Georeferencing 기법을 이용하게 되면 외부표정요소를 구하기 위한 전처리 과정을 생략할 수 있다. 따라서 지상기준점을 이용한 사진기준점측량(AT)을 수행하지 않더라도 수치표고모델만 미리 확보되어 있으면 촬영과 동시에 수치정사사진을 생성할 수 있다. 본 연구에서는 촬영과 동시에 GPS/INS에 의해 획득한 외부표정요소와 항공사진을 이용하여 영상매칭에 의하여 수치표고모델(DEM)을 자동 생성하고, 이 결과를 바탕으로 정사사진을 제작하였다. 실제 도화데이터와 Direct Georeferencing 정사영상과의 오차를 평가한 결과, 표준편차가 X는 약 62cm, Y는 약 76cm 정도가 발생하였다. 이 결과는 축적 1:5,000 수치지도의 정확도 요구를 충분히 만족시킬 수 있는 양호한 결과임을 알 수 있다. Direct Georeferencing에 의한 정사영상의 제작방법은 큰 크기의 과대오차가 발생하는 부분을 수작업 또는 반자동으로 해결할 수 있으면 효율적으로 수치지도를 수정/갱신 할 수 있을 것으로 판단된다. Direct Georeferencing(DG) Is based on the direct measurement of the projection centers and rotation angle of sensor through loading the GPS and INS in aircraft. The methods can offer us to acquire the exterior orientation parameters with only minimum GCPs, even the ground control process could be completely skipped. Hence, as long as securing Digital Elevation Model (DEM), it is feasible to generate digital orthophotos without performing the aerial triangulation with Ground Control Point (GCP) surveying. In this study, the DEM is automatically generated by using a image matching technique based on aerial photos and exterior orientation parameters. This is followed by producing an orthophoto from these results. Finally, accuracy analysis of the georeferencing technique for generating orthoimage indicates that RMS errors of 62cm and 76cm occurred at the X and the Y axis, respectively. This means that the results fulfill the demanding accuracy of the 1:5000 digital map. Hence, it is possible to conclude from this study that the direct georeferencing based orthoimage generation method is able to effectively digital map update.