http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PR Controller Based Current Control Scheme for Single-Phase Inter-Connected PV Inverter
부우충기엔,성세진,Vu, Trung-Kien,Seong, Se-Jin The Korea Academia-Industrial cooperation Society 2009 한국산학기술학회논문지 Vol.10 No.12
최근 태양광 시스템에서는 기존의 태양광 시스템을 계통과 전원으로 상호 접속하는 것에 대한 연구에 관심이 모아지고 있다. 단상, 삼상 시스템에 관계없이 태양광 시스템에서 태양광 인버터는 계통연계 동작에 중요한 역할을 하기 때문에 전체 시스템에서 핵심요소로 고려된다. 태양광 인버터를 제어하기 위해서는 부하 전류 조절이 핵심요소 중 하나이다. 일반적으로 태양광 인버터에서 이용되는 PI 제어기는 정상상태 오차와 왜란에 취약하다는 단점을 가지고 있기 때문에 실제 시스템에 완벽하게 적용하기에는 무리가 있다. 특히, 이는 고주파영역에서의 PI와 PR 제어기의 성능을 비교해보면 알 수 있다. 이 논문에서 제시된 PR 제어기는 무한 이득을 교류 기본파 성분에 넣을 수 있기 때문에 PR 제어기는 회전좌표계의 PI 제어기에서 사용되는 디커플링 기법과 복잡한 변환 없이 제로 정상상태오차에 도달할 수 있다. 그렇기 때문에 이 논문에서는 PI 제어기를 대체하는 이론적 분석을 통해 PR 제어기를 설계하였다. 논문에 제시되어 있는 이론을 바탕으로 한 PR 제어기를 고정 소수점 연산방식의 32비트 마이크로컨트롤러 DSP320F2812를 기반으로 한 3kW 프로토타입 태양광 인버터에 적용, 평가하였다. 또한 태양광 인버터의 제어 성능을 시뮬레이션과 실험결과를 통하여 보여주고 검증하였다. Nowadays, the PV systems have been focused on the interconnection between the power source and the grid. The PV inverter, either single-phase or three-phase, can be considered as the core of the whole system because of an important role in the grid-interconnecting operation. An important issue in the inverter control is the load current regulation. In the literature, the Proportional+Integral (PI) controller, normally used in the current-controlled Voltage Source Inverter (VSI), cannot be a satisfactory controller for an ac system because of the steady-sate error and the poor disturbance rejection, especially in high-frequency range. By comparison with the PI controller, the Proportional+Resonant (PR) controller can introduce an infinite gain at the fundamental ac frequency; hence can achieve the zero steady-state error without requiring the complex transformation and the dq-coupling technique. In this paper, a PR controller is designed and adopted for replacing the PI controller. Based on the theoretical analyses, the PR controller based control strategy is implemented in a 32-bit fixed-point TMS320F2812 DSP and evaluated in a 3kW experimental prototype Photovoltaic (PV) power conditioning system (PCS). Simulation and experimental results are shown to verify the performance of implemented control scheme in PV PCS.
계통연계 태양광발전시스템용 단상 인버터의 설계 및 제어
황인호,성세진,Hwang, In-Ho,Seong, Se-Jin 한국태양에너지학회 1997 한국태양에너지학회 논문집 Vol.17 No.2
최근 태양전지, 연료전지를 이용한 새로운 발전시스템이 개발중에 있다. 특히 소규모 분산형 계통연계 태양광발전시스템은 가까운 장래에 폭 넓게 보급될것으로 예상된다. 태양전지 어레이를 계통선과 결합하는데 사용되는 인버터는 전체 태양광발전시스템의 성능을 결정하는 중요한 요소이다. 본 논문에서는 고조파를 포함한 무효전력 보상능력을 갖는 단상 태양광 인버터 시스템의 설계 및 제어기법을 제시하였다. 제안된 인버터 시스템에 의해 정류기 부하에 의해 발생된 무효전력이 보상될 수 있음을 실험결과로 보여준다. Recently, new generation systems using solar cells or fuel cells are under development. Particularly, it is expected that small scale, utility interactive, dispersed PV system will be widely diffused in the near future. The inverter used in coupling the PV array with utility lines is an important factor determining the overall performance of power generation systems. This paper presents the design and control method of the single-phase PV inverter system that is capable of compensating reactive power including harmonic distortions. It is shown that reactive power caused by rectifier load can be compensated by the proposed inverter system.
풍력발전기의 계통연계 운전시 출력변동에 따른 PCC 전압 변동 예측모델
김상진(Sang Jin Kim),임지훈(Ji Hoon Im),송승호(Seung Ho Song),성세진(Se Jin Seong) 전력전자학회 2008 전력전자학술대회 논문집 Vol.- No.-
고립된 소규모 전력시스템에 소형 풍력발전기를 계통연계 운전할 때 나타날 수 있는 전압변동을 예측하기 위한 방법에 관해 연구하였다. 이를 위하여 고립된 계통에 연결된 기존발전소 및 부하, 변압기, 풍력발전기의 간략화된 시뮬레이션 모델을 PSCAD/EMTDC를 기반으로 구성하고 실제 설치된 풍력발전기의 운전 특성과 비교하였다. 특히, 연계점의 전압변동을 해석적으로 예측하기 위하여 전원측 등가 임피던스와 부하측 등가 임피던스로 구성된 간략화한 모델을 제안하였으며 제안된 방법으로 계산된 전압변동량이 시뮬레이션 및 실측 데이터와 잘 일치하는 것을 확인하였다. 이 결과는 소형 풍력발전기 계통연계 시스템 설계 및 사전검토 단계에서 안정성과 신뢰성을 확보 하기위한 도구로 활용될 수 있다.
Modeling and Analysis of Universal Switch Gear for Custom Power System
Trung-Kien Vu(부우충기엔),Se-Jin Seong(성세진) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.4
This paper deals with modelling and analysis of universal switch gear (USG) in custom power system. The proposed USG is a power electronics-based equipment aimed at enhancing the reliability and quality of power in a low voltage distribution network. It consists of dynamic voltage restorer (DVR) and shunt active power filter (SAPF)[1]. The modelling approach adopted in this paper is based on PSCAD?/EMTDCTM which is an industry standard power system simulation tool package. Graphic based model suitable for electromagnetic transient study is presented for the DVR part of USG and its comprehensive results are presented to verify the DVR part performance with potential custom power solution. This paper is also written in a tutorial style and aimed at the large PSCAD?/EMTDCTM user base.