http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
TIE 제한 주파수 변조 기법을 이용한 낮은 EMI 분산 스펙트럼 클록 발생기
박태명,위재경,이성수,Piao, Taiming,Wee, Jae-Kyung,Lee, Seongsoo 한국전기전자학회 2013 전기전자학회논문지 Vol.17 No.4
본 논문에서는 불연속 주파수 변조 기법을 사용하는 낮은 EMI 분산 스펙트럼 클록 발생기 (SSCG)를 제안한다. 제안된 SSCG는 높은 변조폭을 갖는 삼각 주파수 변조 기법을 사용한다. SSCG의 최대 시간 구간 오차 (MTIE)가 제한 기준을 넘어서면 SSCG의 출력 주파수가 분주기를 거쳐 시간 구간 오차 (TIE)의 값을 감소시킨다. 이러한 불연속 주파수 변조 기법은 주어진 MTIE 제한 기준 내에서 전자기 방사를 효과적으로 감소시킬 수 있다. 이 방법은 일반적인 SSCG보다 전자기 방사를 18.5dB 더 개선하였다. This paper proposed a low EMI spread spectrum clock generator (SSCG) using discontinuous frequency modulation technique. The proposed SSCG is designed for triangular frequency modulation with high modulation depth. When the maximum time interval error (MTIE) of the SSCG is higher than given limit, the output frequency of SSCG is divided by two and used for reducing the time interval error (TIE). This discontinuous frequency modulation technique can effectively reduce the EMI within given limit. The simulated EMI of proposed SSCG was reduced by 18.5dB than that of conventional methods.
불연속 주파수 변조 기법을 이용한 분산 스펙트럼 클록 발생기
박태명,위재경,김부균 한국과학기술원 반도체설계교육센터 2015 IDEC Journal of Integrated Circuits and Systems Vol.1 No.1
In this paper, we propose a novel discontinuous spread clock generator with a low MTIE and low electromagnetic interference (EMI). The proposed circuitry was fabricated with 0.35 ㎛ CMOS process and operated with 3.3V supply voltage at the average center frequency of 100MHz. The measured results showed the MTIE of 11.59ns with the EMI reduction of 14.57dB. 본 논문에서는 낮은 전자 방해 잡음 및 낮은 Maximum time interval error (MTIE)인 새로운 방식의 불연속 주파수 변조 기법을 제안하였다. 제안된 회로는 0.35 ㎛ CMOS 공정을 사용하여 구현하였다. 제안된 회로는 3.3V인 공급전압에서 동작하게 되며 평균 중심 주파수는 100MHz이다. 측정 결과 제안된 방법은 11.59인 낮은 MTIE에서 전자 방해 잡음을 14.57dB 감소하였다.
1-(-2 Thiazolylazo)-2-naphthol을 킬레이트제로 사용한 Cu(Ⅱ)의 염석추출법적 정량
서무룡,박태명 국립경상대학교 공과대학 부설 첨단소재연구소 1991 尖端素材 Vol.1 No.-
As a part of analytical application of 1-(2-thiazolylazo)-2-naphthol (TAN), the extraction method with salting-out tachnique was employed for the determination of Cu(II) ion acetonitrile-water solution. After the extraction of Cu(II) ion into acetonitrile layer as a Cu(II)-TAN complex from the buffered aqueous solution, the visible absorption spectra and differential polarograms were recorded. In this experiment, ammonium sulfate was used as a salting-out agent. Not only the relationship between pH of aqueous phase and extractabilities of TAN chelate, but also the effect of concentraction of ammonium sulfate and chelating agent(TAN) on extractability have been evaluted. And the calibration curves and diverse ion effect for the determination of Cu(II) ion have been investigated by spectrophotometric and polarographic method.