http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
류화성 ( Ryu Hwa-sung ),신상헌 ( Shin Sang-heon ),송성용 ( Song Sung-yong ),김득모 ( Kim Deuck Mo ) 한국건축시공학회 2019 한국건축시공학회 학술발표대회 논문집 Vol.19 No.1
As part of the recent low-energy policy, insulation standards for buildings are increasing every year. In addition, the conventional styrofoam heat insulation material has a problem in that the thickness of the heat insulation material to achieve the standard heat transmission rate is rapidly increased. Although the risk of spreading the structure vulnerable to fire due to insufficient spacing between buildings due to thickened insulation is increasing, the high cost of high efficiency insulation is difficult to solve. On the other hand, it is known that the method to be used as a formwork using insulation is excellent in cost reduction effect by reducing the amount of formwork used and simplifying the subsequent insulation work. The purpose of this study is to evaluate the strength characteristics of multi - layered insulation materials with appropriate strength by reducing the thickness of the insulation by appropriately combining high performance phenolic foam insulation and styrofoam insulation.
류화성 ( Ryu Hwa-sung ),신상헌 ( Shin Sang-heon ),송성용 ( Song Sung-yong ),김득모 ( Kim Deuck-mo ) 한국건축시공학회 2019 한국건축시공학회 학술발표대회 논문집 Vol.19 No.1
In modern times, due to the centralized urban structure, the interval between buildings is narrow and the increase of the heat island phenomenon due to the accumulation of the structure is becoming a social problem. In order to solve these problems, various materials for reducing the surface temperature of buildings are under study. Particularly, in the case of a wall part which is a part directly affected by the outside air of the building, it is a main structural part for determining the room temperature. The purpose of this study was to develop a material that can improve the thermal environment performance of the building by evaluating the temperature control performance of the exterior finishing material using the heat reflecting material as a method for controlling the temperature of the outer wall finishing material.
류화성 ( Ryu Hwa-sung ),박원준 ( Park Won-jun ) 한국건축시공학회 2021 한국건축시공학회지 Vol.21 No.3
본 연구에서는 Lab. 스케일 LIBS 장치를 제작하여 모르타르 내 염화물 분석에서의 LIBS 적용성과 재현성 검토를 수행하였다. 염화물 함량을 조절한 모르타르를 대상으로 기존의 분석방법(XRF, 전위차 적정법)과 LIBS 분석을 동시에 진행하였다. LIBS 분석 결과, 염소이온은 837.59nm 파장에서 검출되었고, 다양한 농도 구간에서의 정밀도를 향상시키기 위하여 전기장 강화를 통한 약 50배의 LIBS 신호증폭을 구현하였다. 수용액 기반의 재현성을 검증을 통하여 LIBS 신호 강도와 Cl농도 사이의 높은 상관관계를 확인할수 있었으며, 콘크리트 염해 내구성 진단에 LIBS적용 가능성을 확인하였다. LIBS has been attracting attention as an analytical method capable of real-time measurement without sample preparation. In this study, a Lab. scale LIBS device was fabricated to examine the applicability and reproducibility of LIBS in the analysis of chloride contents in mortar. The existing analysis method and LIBS analysis were performed simultaneously on the mortar test specimen with the chloride content adjusted. Compared to the chloride content condition of the mortar, the XRF and Potentiometric Titration results also showed a similar trend. As a result of LIBS analysis, chlorine ions were detected at a wavelength of 837.59 nm according to the chloride content condition. In order to improve the precision in various concentration ranges, the LIBS signal amplification of about 50 times through the electric field enhancement was implemented. Through the verification of the aqueous solution-based reproducibility, a high correlation between the LIBS signal strength and the Cl concentration was confirmed, and the possibility of applying LIBS to the durability diagnosis of concrete damage by chloride was confirmed.
유기계 방청제를 혼입한 표면피복재의 유해이온 침투저항에 관한 실험적 연구
류화성 ( Hwa-sung Ryu ),신상헌 ( Sang-heon Shin ),이한승 ( Han-seung Lee ) 한국건축시공학회 2017 한국건축시공학회지 Vol.17 No.2
일반적으로 크리트 구조물의 열화를 발생하는 가장 중요한 원인은 탄산화와 염소이온이다. 대체적으로 많은 콘크리트 구조물에서 탄산화와 염소이온으로 인하여 철근이 부식되며 이에 대한 많은 연구가 이루어지고 있다. 특히, 최근에는 보수용으로서 콘크리트 보호용 표면피복재에 방청제를 함침시켜, 염화물을 포함하고 있는 콘크리트 내 철근의 부식을 억제하는 공법도 개발되어지고 있다. 이에, 본 연구에서는 기존 보수재료 보다 부식 억제가 우수하고 열화원인인CO2 와 Cl-를 고정하는 유기계방청제를 혼입한 표면피복재의 특성 평가를 위해 촉진탄산화 및 시차 열 중량분석(TG-DTA), CASS시험를 실시하여 특성을 실험적으로 평가하였다. 실험 결과, TG-DTA 분석과 촉진탄산화를 통하여 유기계방청제 혼입으로 시멘트 콘크리트에 CO2가 아민유도체와 직접적으로 반응하여 탈 양성자화 되면서 산성상태의 물질을 생성하여 안정화된 상태, 즉 CO2가 고정화되어 탄산화 억제효과가 있음을 확인 하였다. 또한, CASS실험에서도, Cl- 고정 특성이 있는 유기계 방청제가 혼입된 표면피복재를 도포한 시험체의 경우, 28일째까지도 적청 발생이 관찰되지 않았으며 염화물에 의한 철근 부식을 방지하는데 우수한 성능으로 가지고 있음을 확인하였다. In general, carbonation and chlorine ions are the most harmful causes of deterioration of concrete structures. Recently, a method has been developed to control the corrosion of rebar in concrete containing chloride by impregnating a Surface coating material with a inhibitor. In this study, accelerated carbonation and differential thermogravimetric analysis (TG-DTA) and CASS tests were carried out to evaluate the characteristics of Surface coatings containing Organic Corrosion inhibitors which are excellent in corrosion inhibition and fix degradation causes CO<sub>2</sub> and Cl<sup>-</sup>. As a result of the experiment, TG-DTA analysis and accelerated carbonation showed that CO<sub>2</sub> was directly reacted with amine derivative in concrete by the incorporation of Organic Corrosion inhibitor. In other words, CO<sub>2</sub> was immobilized and carbonation inhibition effect was confirmed. In addition, in the CASS test, the specimen coated with the Surface coating material containing the Organic Corrosion inhibitor with Cl<sup>-</sup> fixing property showed no corrosion until the 28th day and had excellent performance in preventing corrosion of a rebar by the chloride ion.
테이블형 다단 드롭 시스템을 이용한 저소음 보-슬래브 거푸집의 구성부재 성능 및 현장적용에 관한 실험적 연구
류화성,정우진,김득모,송성용,신상헌,Ryu, Hwa-Sung,Jeong, Woo-Jin,Kim, Deuck-Mo,Song, Seong-Yong,Shin, Sang-Heon 한국건축시공학회 2017 한국건축시공학회지 Vol.17 No.4
콘크리트 건축물 공사에 있어, 거푸집공사는 전체공사비의 10%를 차지하는 중요한 공정이다. 최근의 건축물은 대형화, 고층화가 이루어지고 있다. 이러한 거푸집공사의 고효율과 안전성을 위하여 거푸집공정의 시스템화가 이루어지고 있으나, 여전히 인명사고와 해체공정에서 발생하는 소음 민원이 빈번히 발생하고 있으며, 이러한 문제의 해결을 위하여 대부분 해외기술에 의존하여 국내 건설현장 여건을 고려하지 않는 관계로 외면되어 기존 거푸집 공법을 답습하고 있는 실정이다. 본 연구는 공정개선, 안전성 향상 및 해체소음 저감이 가능한 슬래브, 보 전용 테이블형 다단 드롭 시스템 거푸집을 개발하고 시스템 내에 사용되는 주요 부재인 장선 멍에와 동바리의 물성을 평가하고, 이 시스템의 현장 적용을 위한 해체공정에서의 소음을 기존 공법과 비교 평가하는 연구로서 실험결과, 멍에 빔과 동바리 모두 슬래브 및 보 타설용 가설재로 사용하기에 충분한 내력이 있는 것으로 나타났으며, 평균소음도가 기존 공법에 비해 10dB(A) 이상 저감되는 것으로 확인되었으며 타설 시의 처짐량을 측정한 결과, 기존 공법 대비 처짐이 저감되는 것을 확인하였다. In concrete construction work, formwork is an important process that accounts for 10% of the total construction cost. Recent buildings are becoming bigger and higher. In order to maximize the efficiency and safety of this formwork, the system of formworking has been systematized. However, the human accidents and the noise complaints arise from dismantling processes frequently occur. In order to solve these problems, most of them are dependent on foreign technology, but they do not take into consideration the conditions of domestic construction site. In this study, we developed a table type multi-drop system form for a slab and beam which can improve the process, safety and reduction of disassembly noise, and evaluated the physical properties of the main members which are used in the system. The results of this study show that there is sufficient strength to be used as a slab and a laying material for both a yoke beam and a supporting post. The noise level is improved compared to existing method.
건축물 외단열재의 열전달평가를 통한 화재 억제 방안 연구
류화성 ( Ryu Hwa Sung ),신상헌 ( Shin Sang Hun ),송성용 ( Song Sung Young ),김득모 ( Kim Deuck Mo ) 한국건축시공학회 2018 한국건축시공학회 학술발표대회 논문집 Vol.18 No.1
Improvement of insulation performance of buildings is a major part. Adiabatic method The adiabatic method minimizes the heat loss of the building. External insulation uses insulation to prevent fire. Ambient air hazards are less prone to fire. When a fire occurs, a phenolic pattern is formed and bond strength with the wall increases. EPS insulation and phenol foam were used to compare external heat transfer and external heat transfer. The heat transfer properties of phenolic foam and styrofoam were evaluated as follows. In the mortar and styrofoam structure, the problem of styrofoam reaching the burning point occurred before the collapse of the mortar, and the phenol foam had a problem in that when the direct fire was continued on the phenol foam, , The characteristics of continuous infiltration appeared. In the case of mortar and phenol foam + styrofoam, the heat penetrated into the interior due to the shrinkage due to the shrinkage of the carbon screen on the phenol foam. However, when reinforced with glass mesh on the outer surface, And to reduce infiltration.