http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
핀 형상에 따른 plate-fin 열교환기의 열전달 및 압력 강하 특성에 관한 실험적 연구
남기언(Ki Ean Nam),오동욱(Dong Wook Oh),송찬호(Chan Ho Song),윤석호(Seok Ho Yoon),이공훈(Kong Hoon Lee),김욱중(Ook Joong Kim) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.5
이 논문은 공기측 열전달과 압력강하의 특성관계를 다양한 핀 형상에 대하여 난방조건에서 실험적으로 조사하였다. 핀 형상 parameter 인 핀 type(offset or louver), 핀 피치 그리고 핀 높이 등을 변화시켜 4개의 알루미늄 시료에 대하여 실험을 수행 하였다. 저속(1.3㎧)에서 고속(4㎧)까지 10case의 평균 유속과 각 속도에 대하여 압력강하(△p) 그리고 총합열전달 계수(UA)를 실험적으로 구하였다. 또한, 실험 데이터에 근거하여, f-factor와 j-factor를 구하여, 측정된 실험값과 기존 문헌의 결과값을 비교하여 데이터 값의 신뢰성을 검증 하였다. 본 연구에서는 열 교환 능력에 큰 영향을 미치는 fin parameter를 도출하고 최적조건의 핀 설계조건을 제시하였다. In this paper, heat transfer and pressure drop characteristics of plate-fin heat exchangers with different fin geometry are investigated. Tested fin geometry parameters are fin type(offset or louver), fin pitch, fin height and louver angle. The average air flow velocity at the sample heat exchanger is set to vary from 1.3 ㎧ to 4.0 ㎧. Pressure drop and overall heat transfer coefficient are measured as a constant heat flux is given to the heat exchanger unit. Friction f-factor and Colburn j-factor of each sample are calculated.
마이크로 채널 열교환기의 유동 균일분포를 위한 최적형상 설계
윤석호(Seok Ho Yoon),남기언(Ki-Ean Nam),김덕종(Duckjong Kim),최준석(Jun Seok Choi) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.5
In recent years, many researchers investigated micro channel heat exchangers because of its high efficiency and compactness. However, few studies about flow uniformity of micro channel heat exchanger have been conducted. For optimizing heat transfer mechanism, the uniformity of flow distribution is significant. In this study, the optimal geometric parameters are investigated through computational analysis using CFD method. And the simulation of flow distribution is performed as change of geometric parameters. The result of this study is used to optimize the design of micro channel heat exchanger.
오동욱(Dong-Wook Oh),남기언(Ki Ean Nam),송찬호(Chan Ho Song),윤석호(Seok Ho Yoon),이공훈(Kong Hoon Lee),김욱중(Ook Joong Kim) 대한설비공학회 2012 대한설비공학회 학술발표대회논문집 Vol.2012 No.6
In this paper, heat transfer and pressure drop characteristic of plate-fin heat exchangers for evaporative cooling system is investigated. Thermal performance and pressure drop of heat exchangers with different louver fin pitches are compared. Experiments are conducted for heat exchangers with different louver fins at the average air flow velocity of 3 m/s . 5.5 m/s. The thermal performance data are analyzed by using the effectiveness-NTU method. Pressure drop and overall heat transfer coefficient are measured as a constant temperature condition is given to the heat exchanger unit.