http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김형표,조찬섭,Kim, Hyung-Pyo,Cho, Chan-Seob 한국센서학회 2000 센서학회지 Vol.9 No.3
본 논문에서는 실내의 공기 흐름을 간단하게 측정할 수 있는 정온도형 디지털 열박막 풍속계를 개발하였다. 센서의 출력전압은 풍속에 대해서 4제곱근에 비례하므로 마이크로프로세서와 A/D 컨버터를 사용하여 선형화 하였다. 제작한 풍속계의 출력 풍속값은 기준 풍속계와 비교한 결과 오차는 ${\pm}2%$이내였다. 제작한 풍속계를 풍속이 10m/sec이고 공기 온도가 $23^{\circ}C{\sim}60^{\circ}C$ 범위에서 온도 실험한 결과에서 온도에 대한 오차는 약 ${\pm}1%$ 이었다. The paper presents the constant temperature digital hot-film anemometer that measures easily a wind velocity at the indoor. The output is linearized using microprocessor and analog-to-digital converter, because the fourth root of the wind velocity is the output voltage of the sensor. The comparison result between fabricated and reference anemometer is less than ${\pm}2%$. In the range of air temperature of $23^{\circ}C{\sim}60^{\circ}C$, the error is about ${\pm}1%$ in wind velocity 10m/sec.
김형표(Hyung Pyo Kim),조찬섭(Chan Seob Cho) 한국센서학회 2000 센서학회지 Vol.9 No.3
N/A The paper presents the constant temperature digital hot-film anemometer that measures easily a wind velocity at the indoor. The output is linearized using microprocessor and analog-to-digital converter, because the fourth root of the wind velocity is the output voltage of the sensor. The comparison result between fabricated and reference anemometer is less than ±2%. In the range of air temperature of 23℃ ∼ 60℃, the error is about ±1% in wind velocity 10m/sec.
김형표 ( Hyung Pyo Kim ) 한국센서학회 2004 센서학회지 Vol.13 No.2
N/A This paper presents a method that the engine oil condition is detected using a natural convection heat transfer in a engine oil. A sensor circuit maintains a constant temperature difference between a heat plate and engine oil for detecting a natural convection heat transfer rate on the constant temperature. The natural convection heat transfer rate is measured by a current through the heat plate of the sensor circuit. The sensor is tested by a fresh oil. 6,000 km and 10.000 km driven oil in the oil temperature range from 20℃ to 100℃. In the experimental result, when the current through the heat plate is altered by variation of a engine oil temperature and flows driven oil more than fresh oil, the sensor could inform a engine oil deterioration to a car driver.
김형표 ( Hyung Pyo Kim ),김진규 ( Jing Yu Kim ) 한국센서학회 2012 센서학회지 Vol.21 No.5
This paper presents the power source of wireless sensor node (WSN) using supercapacitors and a solar cell. Supercapacitors have high lifetime cycling compared to that of batteries. Supercapacitors are connected in series to achieve higher voltage and a voltage balancing circuit is required to ensure that no individual cell goes overvoltage. We employ an active balancing circuit that draws minimal current by using transistors. A diode is connected in series with each supercapacitor, A new balancing circuit that equalize the cells-voltage reduces energy consumption of supercapacitors. Voltage of operating WSN is applied 2.2-3.3V by DC/DC converter and supercapacitor voltage 2.2-5.1V. Maximum operating time of wireless sensor node is about 16 hours in full charging.
김진규,김형표,박영호,Kim Jin-Gyu,Kim Hyung-Pyo,Park Young-Ho 한국조명전기설비학회 2005 조명·전기설비학회논문지 Vol.19 No.4
본 논문은 액중 이온교환수 발생장치 내에 양${\cdot}$음이온교환격막을 중심으로 불평등전계를 형성할 수 있는 사선빗살형 전극을 설치하였다. 그리고 정극성과 부극성의 펄스전압을 인가하여 펄스전압의 극성변화에 의한 산화환원전위 변화가 이온교환수 발생장치 내에서 발생된 용존산소량에 미치는 영향을 비교 검토하였다. 실험결과, 이온교환수 발생장치 내에 인가된 펄스전압의 극성변화와 전기비저항의 차에 의한 산화환원전위 및 용존산소농도 변화를 관찰할 수 있었다. 그리고 인가된 펄스전압의 극성변화와 전기 비저항 차에 의한 전위변화가 용존산소농도를 증가시켜 액중에서 고농도의 이온들을 생성시킴을 알 수 있었다. This paper proposes the new type of an ion exchange water generator system. The system has an +/- ion exchange membrane located in center and a diagonal-interdigit type electrode applied to a pulsed power. This system is studied in the liquid for the oxidation/reduction potential and the dissolved oxygen concentration by the polarity effects. Consequently, as a diagonal-interdigit type electrode is installed in each side of device, the oxidation/reduction potential and dissolved oxygen concentration by polarity changes and electrical resistivity differences be observed. An ion concentration in the ion exchange water generator system is increased by dissolved oxygen generated from oxidation/reduction potential changes.
정재승(Jae-Seung Jung),김형표(Hyung-Pyo Kim),김진규(Jin-Gyu Kim) 한국조명·전기설비학회 2013 조명·전기설비학회논문지 Vol.27 No.11
In this paper, a corona motor with blade type electrodes has been employed as a wind blower. The rotation speed was influenced significantly by the polarity of applied voltage and the number of blades. Therefore the effect of polarity of applied voltage and the number of blades on the electrical and mechanical fundamental properties of corona motor were investigated experimentally. The rotation speed decreased for increasing of number of blades, because the mass of blades increased. But the amount of air blow increased despite decreasing of the rotation speed, because air volume is not only influenced by rotation speed but also the number of blades and ionic wind which generated between blade tips and a induction electrode. Although space occupied by blades of the corona motor is smaller than the whole area of the blast pipe, wind rises a whole range of a wind blower for such reasons.
지그비 기반 센서 네트워크를 이용한 침수감지용 광 이중센서 개발
계광현 ( Kwang Hyun Key ),김형표 ( Hyung Pyo Kim ),손경락 ( Kyung Rak Sohn ) 한국센서학회 2010 센서학회지 Vol.19 No.3
In this paper, a remote submersion warning system based on multi-mode optical fiber(MMF) sensors and a wireless sensor network(WSN) are proposed. To improve the reliability and stability of the sensors, the dual optical fiber sensors combined to the optical coupler are demonstrated. A slave zigbee as a wireless sensor module was used as a platform to monitor and record the signal from the MMF sensors and then transmits these information to a master zigbee wirelessly. The monitoring system running the LabVIEW® software was connected to the internet to support the short message service(SMS) through extensible markup language(XML) web service. No matter where the managers are, they can always receive the real-time remote-monitoring data for safety check.