http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Calcium sulfate와 혈소판 유래성장인자의 혼합사용이 치주인대세포에 미치는 영향
김준성,최성호,유윤정,채중규,김종관,조규성,Kim, Jun-Seong,Choi, Seong-Ho,Yu, Yun-Jung,Chai, Jung-Kiu,Kim, Chong-Kwan,Cho, Kyoo-Sung 대한치주과학회 1997 Journal of Periodontal & Implant Science Vol.27 No.4
It was well known that calcium sulfate was biocompatible, resorbed rapidly in the body, had potential as a good barrier membrane. Platelet-derived growth factor(PDGF) was one of polypeptide growth factor that had been reported as a biological mediator which regulates activities of wound healing process including the cell proliferation, migration and metabolism. The purpose of this study was to evaluate the effects of a combination of calcium sulfate and PDGF on periodontal ligament cells in vitro to use as a regeneration promoting agent of periodontal tissue. Human periodontal ligament cells were prepared from the premolar tooth extracted for the orthodontic treatment. Cells were cultured in ${\alpha}-MEM$ contained with 20% FBS, at the $37^{\circ}C$, 100% of humidity, 5% $Co_2$ incubator. Cells were inoculated and cultured into 96 well culture plate with $1{\times}10^4cells/well$ of ${\alpha}-MEM$ for 1 day. After discarding the medium, those cells were cultured in ${\alpha}-MEM$ contained with 10% FBS alone(control group), in calcium sulfate(calcium sulfate group), in calcium sulfate treated with 15ng/ml of PDGF-BB(calcium sulfate+PDGF group), in ${\alpha}-MEM$ contained with 10% FBS treated with 15ng/ml of PDGF-BB(PDGF group) for 1, 2, 3 day respectively. And then each group was characterized by examining of the cell counting, MTT assay, collagen synthesis. The results were as follows. 1. In the analysis of cell proliferation by cell counting, both calcium sulfate group and calcium sulfate plus PDGF group showed no stastically significant difference compared to control group, but there was stastically significant difference between PDGF group and calcium sulfate group at 1, 2 day(P<0.05). 2. In the analysis of cell proliferation by MTT assay in calcium sulfate extracts, both calcium sulfate group and calcium sulfate plus PDGF group showed no stastically significant difference compared to control group, but there was stastically significant difference between PDGF group and calcium sulfate group at 2, 3 day, and between calcium sulfate plus PDGF group and calcium sulfate group at 2 day(P<O.05). 3. In the analysis of cell proliferation by MTT assay in transwell, both control group and PDGF group showed stastically significant difference compared to both calcium sulfate group and calcium sulfate plus PDGF group at 1 day, but there was no stastically significant difference compared to both calcium sulfate group and calcium sulfate plus PDGF group at 2, 3 day(P(0.05). 4. In the analysis of collagen synthesis by immunoblotting assay in calcium sulfate extracts, high level was detected on calcium sulfate group at 3 day, on calcium sulfate plus PDGF group at 1 day, on PDGF group at 2 day. On the basis of these results, calcium sulfate was biocompatible on the periodontal ligament cells and might have potential possibility as a vehicle of PDGF in the periodontal tissue regeneration.
MOS 커패시터 중화기법을 이용한 W-Band 고 이득 저잡음 증폭기 설계
박하정(Ha-Jung Park),김준성(Jun-Seong Kim),박재현(Jae-Hyun Park),김병성(Byung-Sung Kim) 한국전자파학회 2019 한국전자파학회논문지 Vol.30 No.9
본 논문에서는 65-nm CMOS 공정을 이용하여 4단의 차동 공통소스 구조로 80 GHz 대 고 이득 저잡음 증폭기를 설계하였다. 밀리미터파 대역에서 공통 소스 구조의 이득저하를 개선하기 위해 교차 결합된 MOS 커패시터를 사용하여 게이트와 드레인 간의 Cgd을 중화시켰다. MOS 커패시터의 well 바이어스 구성에 따른 이득의 변화를 검토하고, 안정된 최대 이득을 얻을 수 있는 바이어스 조건을 도출하였다. 측정된 최대 이득은 83.2 GHz에서 28.43 dB이며, 시뮬레이션 결과 잡음지수는 6.89 dB이다. 제작한 저잡음 증폭기는 1.2 V 공급 전원에서 회로는 50 mW의 DC 전력을 소모한다. This study presents a four-stage common-source(CS) differential low-noise amplifiers at the 80 GHz band developed by using the 65-nm complementary metal–oxide–semiconductor(CMOS) process. To improve the gain of CS structures in the millimeter wave band, the Cgd capacitance between the gate and the drain is neutralized by using a cross-coupled MOS capacitor. By varying the Well bias configuration of MOS capacitor, the characteristics of the amplifier is observed, and the optimal bias condition is derived to achieve maximum gain and high stability. The implemented circuit showed a maximum gain of 28.43 dB at 83.2 GHz and a simulated noise figure of 6.89 dB. The low noise amplifier consumes 50 mW direct current(DC) power from a 1.2 V supply voltage.
이승수(Seoung Soo Lee),김준성(Jun Seong Kim),정연길(Yeon-Gil Jung) 한국산학기술학회 2020 한국산학기술학회논문지 Vol.21 No.8
경사화 두께를 갖는 열차폐 코팅의 열적 내구성과 열적 안정성에 대한 코팅층 두께의 영향을 화염 열피로 시험과 열충격 시험을 통해서 조사하였다. Bond 층과 top 층은 각각 Ni-Cr계 상용 MCrAlY 분말과 상용 이트리아 안정화 지르코니아 (YSZ) 분말을 사용하여 니켈기지의 초내열합금 모재 (GTD-111)에 대기 플라즈마 용사법 (APS)으로 코팅층을 형성하였다. 1100 ℃의 화염으로 1429회 열피로 시험 후 bond 층이 일부 산화되고 top 층과 bond 층 계면에서 열화에 의한 산화층 (TGO)이 관찰되었으나, 코팅층 부위와 관계없이 균열이나 박리현상 없는 양호한 미세구조를 나타내었다. 1100 ℃ 열충격 시험결과, 37회 열충격 테스트 후 코팅층의 얇은 부위에서 박리가 시작되어 98회 시험 후 코팅층의 50% 이상이 박리되었으며, 코팅층의 두께가 얇게 형성된 부위는 코팅층이 두껍게 형성된 부위에 비해, top 층의 박리와 함께 bond 층의 산화가 많이 진행되었으며, 코팅층 두께가 상대적으로 두껍게 형성된 부위에서 열차폐 효과의 증가로 인해 bond 층의 내산화성과 열적 안정성이 우수한 것으로 나타났다. The effects of the coating thickness on the thermal durability and thermal stability of thermal barrier coatings (TBCs) with a gradient coating thickness were investigated using a flame thermal fatigue (FTF) test and thermal shock (TS) test. The bond and topcoats were deposited on the Ni-based super-alloy (GTD-111) using an air plasma spray (APS) method with Ni-Cr based MCrAlY feedstock powder and yttria-stabilized zirconia (YSZ), respectively. After the FTF test at 1100 ℃ for 1429 cycles, the bond coat was oxidized partially and the thermally grown oxide (TGO) layer was observed at the interface between the topcoat and bond coat. On the other hand, the interface microstructure of each part in the TBC specimen showed a good condition without cracking or delamination. As a result of the TS test at 1100 ℃, the TBC with gradient coating thickness was initially delaminated at a thin part of the coating layer after 37 cycles, and the TBC was delaminated by more than 50% after 98 cycles. The TBCs of the thin part showed more oxidation of the bond coat with the delamination of topcoat than the thick part. The thick part of the TBC thickness showed good thermal stability and oxidation resistance of the bond coat due to the increased thermal barrier effect.
최병기(Byeong Gi Choi),김준성(Jung Seong Kim),송준용(Jun Yong Song),이경환(Kyung Hoan Lee) 한국자동차공학회 2015 한국자동차공학회 학술대회 및 전시회 Vol.2015 No.11
본 연구는 듀얼 클러치 변속기를 조작하는데 사용되는 기어엑츄에이터용 솔레노이드의 소음 및 진동을 저감시키는 제어 알고리즘에 관한 것이다. 듀얼 클러치 변속기는 수동 변속기 메커니즘에 기반을 두고 클러치를 이용하여 빠른 변속이 가능한 수동변속기의 효율성과 자동변속기의 편리성을 모두 갖춘 시스템이다. 이 시스템에서 사용되는 솔레노이드는 PUSH, PULL 동작을 통해 작동력을 발생하고 이를 통해 변속 시 컨트롤 핑거의 수직 위치를 변화 시킨다. 기어에츄에이터에 사용되는 솔레노이드는 상대적으로 긴 구동 변위와 빠른 응답속도를 만족하기 위해 고속으로 작동되는 과정에서 기구적으로 발생하는 소음과 진동이 크다. 이 때 발생하는 소음이 하이브리드 차량의 경우 운전자에게 전달되어 불만이 발생할 수 있다. 본 연구는 이러한 소음을 개선하기 위하여 AMESim 시뮬레이션 결과와 실제 솔레노이드 구동 시 소음 및 진동을 비교 분석하고, 제어기에서 솔레노이드의 위치 정보를 솔레노이드 내부의 위치 Sensor를 통해 수신 후 이를 이용하여 다양한 위치제어 알고리즘을 검토하여 현재 솔레노이드의 기구적 문제를 제어로 개선 하고자한다.