http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김영석(Young Seuk Kim) 한국생산제조학회 2005 한국생산제조학회지 Vol.14 No.5
It is important to measure the rotational accuracy of NC lathe spindle as it affects to the qualities of all machines machined by the NC lathe using in industries. The bad rotational accuracy of NC lathe spindle are caused mainly by wearness of the spindle in using and quality of spindle when machining and using low level bearings. It occurs especially in case of NC lathes because the cutting force acting to work-piece act on one side to the spindle not to both sides symmetrically. Therefore in this study, constructing experimental appratus for measuring of rotational accuracy by using eddy current type gap sensors, converters, screw terminal, data acquisition board inserted in computer and software for data acquisition, DT VEE ver. 5.0 and then error data acquired in the rotational accuracy test of NC lathe spindle are analysed in plots and statistical treatments.
김영석(Kim Young Seuk) 한국생산제조학회 2007 한국생산제조학회지 Vol.16 No.6
It is important to measure the rotational accuracy of lathe spindle as it affects to the qualities of all machines machined by the lathe using in industries. The bad rotational accuracy of lathe spindle are caused mainly by wearness of the spindle in using and quality of spindle when machining and using low level bearings. It occurs especially in case of lathes because the cutting force acting to work-piece act on one side to the spindle not to both sides symmetrically. Therefore in this study, constructing experimental apparatus for measuring of rotational accuracy by using eddy current type gap sensors AEC5706PS and sensors, s-06LN, data acquisition board DT9834(USB type) and software for data acquisition, DT Measure Foundry ver. 4.0.7 etc., error data acquired in the rotational accuracy test of lathe spindle are analysed in plots and statistical treatments.
김종찬(Kim, Jong-chan),이영민(Lee, Young-min),윤운상(Yoon, Woon-Sang),구민호(Koo, Min-Ho),김영석(Keehm, Young-seuk) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
대수층 축열 시스템(ATES)의 효율은 지중에 저장된 열 사이의 간섭에 의해 결정이 되며, 열 간섭에 영향을 미치는 요인들은 시추공 간 이격거리, 대수층의 수리 전도도, 주입/양수량 등이 있다. 따라서 이 연구에서는 지하수-지열 거동 모델링을 통하여 열 간섭이 일어나는 현상과 열 간섭이 시스템 효율에 미치는 영향을 분석하였다. 모델링 결과로부터 이격거리는 작을수록 그리고 대수층의 수리전도도와 주입/양수량은 클수록 열 간섭이 잘 일어나는 것을 확인하였고, 열 간섭 계수가 1일 때는 시스템 효율이 상대적으로 크게 낮아지고, 열 간섭 계수가 1 미만일 때는 변화가 미미한 것을 확인하였다. ATES 를 이용한 냉난방 시스템을 시공 하고 있는 안성 연구지역에 대한 장기 예측 모델링을 수행 하였다. 모델링 결과 이격거리가 80 m 이고, 주입/양수량이 100 m³/day 일 때, 시스템 가동 7년경과 뒤 여름철과 겨울철에 계산된 시스템 효율은 각각 36 RT 와 31 RT 로 나타났다. 따라서 주입/양수량을 100 m³/day로 했을 때, 냉난방 대상건물의 필요 부하인 20 RT 를 충분히 충족할 수 있을 것으로 판단된다.
심부지열개발을 위한 단층대에서의 열-수리적 거동 모델링
김종찬(Kim, Jong-Chan),이영민(Lee, Young-Min),구민호(Koo, Min-Ho),김영석(Keehm, Young-Seuk) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.11
지층 내에 발달한 고투수성 단층은 유체, 에너지, 그리고 용질이 이동하는데 있어서 중요한 역할을 하는 지질구조이다. 따라서 고투수성 단층 주변부에서는 온천, 지열 이상대, 그리고 금속 광상 등이 형성될 가능성이 크다. 이 연구에서는 열-수리적 거동 모델링을 통하여 단층에 의한 온천 또는 지열 이상대의 형성 원인을 확인하였다. 단층의 구조에 따른 지하수 유동과 이에 따른 지층 내 열적 상태를 확인하기 위해서 단층 구조가 다른 3가지의 경우에 대해서 2차원 열-수리적 거동 정류 모델링을 수행하였다. 모델링 결과 단층 구조가 다른 3가지의 모든 경우에서 단층의 투수율이 커지면 단층대에서의 용출 온도가 초기 온도 보다 높아지는 경향을 확인 할 수 있고, 경우에 따라서 모암의 투수율 역시 용출온도에 영향을 미치는 것을 확인 하였다. 따라서 심부지열 개발을 위한 연구지역에 대해 보다 정확한 예측 모델링을 수행하기 위해서는 단층의 구조, 단층과 모암의 투수율, 그리고 수리지질학적 정보 등이 매우 중요하다고 할 수 있다.