http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
류호정(Ho Jung Ryu),최정후(Jeong Hoo Choi),이창근(Chang Keun Yi),선도원(Do Won Shun),손재익(Jae Ek Son),김상돈(Sang Done Kim) 한국화학공학회 1999 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.37 No.3
Effects of height from the distributor plate and bed height at minimum fluidization on the minimum slugging velocity have been investigated in a gas fluidized bed(0.1 m i.d. and 2.5 m height) using sand(mean diameter : 0.286 ㎜, apparent density : 2,561 ㎏/㎥) as bed material. Minimum slugging velocity decreased with increasing height from the distributor plate, however, increased with increasing bed height at minimum fluidization. A model has been proposed to predict the minimum slugging velocity based on bubble size correlation. The proposed model can predict the present and previous experimental results reasonably well.
최정후,선도원,김상돈,김병채,최광배 한국화학공학회 1995 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.33 No.5
전기로 가열되는 직경 0.1 m, 높이 2.1 m의 유동층에서 혼합입도(0-0.425㎜)의 또래를 총물질로 사용하여 층온도의 변화에 따른 고체입자의 비말동반특성을 고찰하였다. 실험변수로는 입도(0.075-0.425㎜), 기체유곡(0.65-2.3 m/s), 유동층온도(20-600℃)가 고려되었다. 입자비산속도에 대한 층온도의 영향은 유동과속도 0.8 m/s 이하에서는 온도가 증가함에 따라 아주 완만하게 증가하는 경향을 보였다. 유동화속도 1 m/s 이상에서는 온도가 증가함에 따라 감소하다가 최소값을 보인후 다시 증가하는 경향을 나타내었으며, 최소값의 위치는 유속이 증가함에 따라 더 높은 온도로 이동하였다. 이와 같은 경 향은 유동화속도가 종말속도인 입 경이 온도에 따라 변화하는 경향과 일치하였다. The effect of temperature en the particle entrainment rate was measured and discussed in a gas fluidized bed(0.1m in diameter, 2.1m high) which used sand as a bed material and was equipped with an electric heater. The particle size(0.075-0.425㎜), gas velocity(0.65-2.3 m/s) and bed temperature(20-600℃) were varied as experimental variables. The particle entrainment rate increased very slowly with the bed temperature at the gas velocity less than 0.8 m/s. At the gas velocity greater than 1 m/s, the particle entrainment rate decreased with increasing the bed temperature until a certain temperature above which the particle entrainment rate increased with the bed temperature. The minimum point of particle entrainment rate shifted to higher temperature with increasing gas velocity. The change of the particle entrainment rate along the bed temperature was same as that of the particle size whose terminal velocity was equal to the gas velocity.
기체유동층에서 슬러그 특성 : 2. 슬러그 길이와 슬러그 상승속도 2. Slug Length and Slug Rising Velocity
손재익,최정후,김상돈,류호정 한국화학공학회 2001 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.39 No.5
기체유동층에서 슬러그 길이와 슬러그 상승속도에 미치는 유속, 측정높이, 최소유동화상태의 층높이, 층직경 및 입자특성의 영향을 측정 및 고찰하였다. 슬러그 길이는 유속, 측정높이와 최소유동화상태의 층높이가 증가함에 따라 증가하였으나 층직경이 증가함에 따라 감소하였다. 슬러그 상승속도는 유속, 측정높이와 최소유동화상태의 층높이가 증가함에 따라 증가하였으며 층직경이 증가함에 따라 다소 증가하는 경향을 나타내었다. 동일한 과잉기체속도에서 슬러그 길이와 슬러그 상승속도는 Geldart 분류 A 및 AB 입자계에 속하는 FCC 입자의 경우보다 Geldart 분류 B 입자계에 속하는 모래입자의 경우가 크게 나타났다. The effects of gas velocity, height from the distributor plate, bed height at minimum fluidization, column diameter and particle properties on vertical slug length and slug rising velocity were measured and discussed. The vertical slug length increased with increasing the gas velocity, height from the distributor plate and bed height at minimum fluidization, however, decreased with an increase of column diameter. The slug rising velocity also increased with increasing gas velocity, height from the distributor plate and bed height at minimum fluidization. The slug rising velocity increased slightly with column diameter. The vertical slug length and the slug rising velocity of sand were higher than that of FCC at the same excess gas velocity.
손재익,최정후,김상돈 한국화학공학회 1988 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.26 No.5
넓은 입도분포의 석탄을 사용하는 대형유동층 연소로(1.01m ×0.83m ×4.0m-height)에서 회분이 많은 저열량무연탄입자(입경범위 0.42-12.7mm)의 탄소연소특성을 측정 및 고찰하였다. 일정연소조건에서 탄소의 연소전환율은 입자의 평균층내체류시간이 증가함에 따라 증가하며, 일정평균층내체류시간에서 탄소의 연소전환율은 입도가 클수록 감소하였다. 입자의 연소구조는 고유연소반응구조와 정성적으로 일치하였으며 탄소연소전환율은 다음의 상관식으로 나타내졌다. 1-X= (R_c/R_p)³=0.647 (R_p/K')^(1.09) Combustion characteristics of low grade anthracite coal particles (0.42-12.7 ㎜ in diameter) with high ash content have been studied in a large fluidized bed combustor of 1.0l m × 0.83m × 4.0m-height. Carbon conversion increased with the increase of mean residence time of particles in the combustor at the given experimental conditions. However, carbon conversion decreased with the increase of particle size at the same mean residence time of the particles. The present combustion reaction agreed qualitatively to the intrinsi◎ combustion kinetic mode. The following correlation was suggested for the carbon conversion of the coal samples investigated: 1-X= (R_c/R_p)³=0.647 (R_p/K')^(1.09)