http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
석탄회를 활용한 저강도고유동화재의 공유수면매립현장에 대한 적용성 평가
공진영,정혁상,조삼덕,김주형,현재혁,천병식 한국지반공학회 2012 한국지반공학회논문집 Vol.28 No.12
This paper presented the strength and environmental characteristics of reclaimed-ground filled with controlled lowstrength materials (CLSM) made of coal ash, small amounts of cement, and water in a reclamation site and evaluated the possibility of the use of coal ash on reclamation materials for beneficial use. Three-month period of SPT, CPT,environmental effects evaluation etc. were conducted. N values and cone resistances in ground filled with CLSM were greater than or similar to those in dredging sand. In case of land filled with coal ash except cement these values were lower than those in dredging sand. The results of soil and seawater pollution were lower than test criteria without high pH. Also the values of PH test were measured between pH 5.0∼9.0, the criteria of industrial water in the Law for the Underground Water of Korea.
공진영,천병식,신영완,황의성 한국지반공학회 2009 한국지반공학회논문집 Vol.25 No.1
평면변형조건의 벽체에 작용하는 토압은 벽체의 형태에 따라 많은 연구가 수행되어 거의 통일된 방법이 설계에 사용되고 있다. 그러나, 일반적으로 지중연속벽(diaphragm wall)공법에 의해 시공되는 원형수직구 벽체에 작용하는 토압은 정지토압을 적용하여 설계하고 있어 안전측이지만 과다한 단면설계를 수행하고 있다. 본 연구에서는 사질토지반에 설치된 원형수직구의 지반-구조물 상호작용에 의해 강성벽체에 작용하는 평형토압을 산정하기 위해 변형구속법의 적용을 제안하였다. 또한, 원통형벽체 모형실험을 통하여 벽체에 작용하는 토압분포를 확인하였다. 실험결과 토압은 주동토압보다 약 1.4배 크고 정지토압보다 0.8배 작았으며, 변형구속법에 의한 예측값과 전반적으로 잘 일치하였다.
공진영,김영석,배규진,백용 대한지질공학회 2016 대한지질공학회 학술발표회논문집 Vol.2016 No.1
우리나라는 대표적 자원수입국으로 1990년대부터 러시아와 자원협력사업, 특히 유라시아 이니셔티브를 추진하고 있으나, 자원수입 외에 성과는 부족한 상황이다. 본 연구는 미래 우리나라 기업의 시베리아 파이프라인 건설 시장 진출 시에 도움을 주기 위한 기초연구로, 그 내용으로는 동토지역 대기 및 지중 온도, 향후 개발 가능성이 높은 파이프라인에 대하여 검토하였다.
석탄회를 활용한 저강도고유동화재의 일축압축강도 및 플로우 특성
공진영,강형남,천병식 한국지반공학회 2010 한국지반공학회논문집 Vol.26 No.1
Controlled low strength material (CLSM) is a flowable mixture and does not need to be compacted. It is produced by mixing portland cement, fly ash, fine aggregates, water and chemical admixtures. Sand is the most commonly used fine aggregates in the conventional CLSM, but it is getting more and more difficult to obtain sand in Korea. In this study, the characteristics of unconfined compressive strength, flow and applicability of a new CLSM that is produced by mixing of pond ash, fly ash, water, cement are examined. An unconfined compressive strength satisfies the standard unconfined compressive strength (0.5∼1.0 MPa) were obtained when the mixture ratio of pond ash and fly ash is 30:70∼70:30, cement ratio is 3.0∼5.0%, and water content is 31∼34%. The results of flow test indicate that the mixture ratio of pond ash and fly ash which satisfy the standard flow value (0.2 m) is 30:70∼70:30.
인천 청라지역의 연약지반 개량공법에 따른 지반개량효과 및 침하분석
공진영(Kong, Jinyoung),김흥남(Kim, Heungnam),천병식(Chun, Byungsik) 한국지반환경공학회 2012 한국지반환경공학회논문집 Vol.13 No.2
본 연구에서는 연약지반 중 선행하중재하 공법을 적용한 6개 지역과 연직배수 공법을 적용한 6개 지역을 대상으로 압밀침하 특성을 비교하였다. Asaoka방법, 쌍곡선방법, Hoshino방법의 장래 예측 침하량 기법을 이용하여 압밀침하량을 예측하고, 실제계측 침하량과 비교하였으며, 종합적으로 Asaoka방법에 의해 예측된 장래침하량이 쌍곡선방법이나 Hoshino방법에 비해 예측 정확도가 높게 평가되었다. 연직배수공법을 적용한 지역에서는 Asaoka방법이 침하량 예측 정확도가 다른 방법에 비해 높게 평가된다고 알려진 것과는 다르게 세 방법 모두 비슷한 정확도를 나타내었다. 또한 연구대상지역의 지반개량 전후의 확인조사를 통해 N치의 변화, 토층의 물리적, 역학적 특성을 조사하였으며, 개량 후 물성치는 개선되고, 침하량 크기와 관계되는 역학적 특성들은 개선되었다. 또한, 토질의 강도는 증가한 것을 확인하였으며, 침하량과 관계되는 물성치의 변화가 큰 것으로 나타났다. In this study, characteristics of consolidation settlement of soft grounds adapting preloading method and vertical drain method were compared. A real measurement settlement is compared with predicted one by the future settlement prediction method like the Asaoka"s method, the Hyperbolic method and the Hoshino method. A accuracy of predicted future settlement by the Asaoka"s method is relatively higher than the Hyperbolic method or the Hoshino method generally. But in the area conducted with the vertical drain method, settlement prediction accuracy of three methods is similar unlike popular beliefs; Asaoka"s is the better method for prediction than others. The study area is also confirmed by investigation of the drainage system after applying the change through the N values, soil physical and mechanical properties were investigated, and physical properties are improved.
공진영(Jinyoung Kong),김영택(Youngtak Kim),강재모(Jaemo Kang),이장근(Jangguen Lee) 한국지반환경공학회 2014 한국지반환경공학회논문집 Vol.15 No.7
피복공법은 해저 퇴적오염물질을 차단하고 안정화시켜 처리하는 방안이다. 국내에서는 피복공법에 대한 연구가 부족하나, 오염물질이 방출되지 않기 위한 공학적 접근법이 반드시 필요하다. 본 연구에서는 피복설계 시 중요 인자인 피복재 침식을 확인하기 위해 조파장치를 이용한 수리모형실험을 실시하였다. 1:10의 실험축척을 적용하여 0.07∼2 mm 크기의 모래를 피복 재료로 사용하였고, 모형 수조 내 강사한 후 파랑을 발생시켜 피복재의 형상변화를 관측하였다. 실험결과, 피복재의 표면은 파랑의 파형과 유사하게 변형이 발생하였으며, 파랑의 파고가 증가할수록 대체적으로 침식되는 피복재의 깊이가 증가하였다. In-situ capping is a method to stabilize contaminated sediments by isolation. Few researches on the in-situ capping have been performed, although the engineering approach is still required to prevent the release of contaminants. In this study, hydraulic model test were conducted by using a wave generator to observe the change of cap thickness which is important factor in design of capping. Sands with particle size between 0.075 to 2 mm as capping materials were used to observe the change of capping thickness by waves. The experimental results show that the surface of capping materials is similar to wave form. The more wave height increases, the more erosion of capping materials increases.
그라우팅자동관리시스템을 이용한 액상화 방지 그라우팅의 적용
공진영(Kong Jinyoung),강준오(Kang JunO),조현수(Cho Hyunsoo),김진춘(Kim Jinchun),천병식(Chun Byungsik) 한국지반환경공학회 2011 한국지반환경공학회논문집 Vol.12 No.9
기존의 액상화 방지를 위한 그라우팅은 부정확한 계측장비를 사용하고 시공 품질관리를 경험에 의존하는 단점이 있다. 본 연구는 ○○○ 고속도로 건설현장 내 말뚝기초 주변의 지반을 그라우팅으로 보강한 사례를 분석하여 액상화 대책공법으로서 그라우팅 보강효과에 대한 연구를 실시하였다. p-q-t 도표 유형분석을 통해서 결정된 주입압, 주입속도 및 주입대상지반의 입도특성, 주입재의 점도특성으로부터 도출한 결과를 그라우팅 자동관리시스템에 적용하여 그라우팅의 주입효과를 높였다. 주입 후 SPT 시험을 실시한 결과 N값이 5-20까지 증가하여 액상화에 대하여 안전한 것으로 나타났다. This study conducted the research on the method of grouting quality management and the improvement effect by applying grouting construction’s quality management technology to automatic injection management equipment through measure of liquefaction based on the case of reinforcement applying grouting at the region where liquefaction happened at section 12 site of highway construction. The pressure(p), speed(q), grouting penetration radius(R) value from injection pressure, injection speed, characteristics of grain size, and characteristics of viscosity through p-q-t chart analysis was applied to the automatic grouting system which could improve the quality management of grouting. Standard penetration test results after injection showed that N values represented 5-20 and the prevention of liquefaction became possible.