http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
3D 입체영상 콘텐츠 제작 교육 방법론 -대학교육을 중심으로
박성대,이준상,Park, SungDae,Lee, Junsang 한국정보통신학회 2016 한국정보통신학회논문지 Vol.20 No.11
2009년 3D 입체영화 아바타의 등장 이후 많은 연구기관에서 3D 입체영상에 대한 연구를 지속해 왔다. 또한 대학에서 3D 입체영상 관련 연구 및 교육이 다양하게 이루어져 왔으며, 대학 교육과정에까지 3D 입체영상 제작 교육을 다루고 있다. 그러나 대학에서 고가의 카메라 및 리그 등의 장비를 구입하여 3D 입체영상 콘텐츠 제작 교육을 하기에는 많은 어려움이 있는 것이 현실이다. 본 논문은 대학의 교육과정 중에서 소프트웨어를 이용한 3D 입체영상 콘텐츠 제작 교육과정에 대해 다룬다. 3D 입체영상 콘텐츠 교육과정에서 다루어져야 할 이론적인 내용과 이론을 바탕으로 실시한 실습 교육과정을 수행하였다. 그 결과 학생들은 3D 입체영상의 제작원리 대하여 이해하고 다양한 소프트웨어를 이용하여 3D 입체영상을 제작할 수 있었다. 이러한 제작 과정을 통하여 대학에서의 올바른 3D 입체영상 콘텐츠 제작에 대한 교육방법을 논의하고자 한다. Many research institutes have studied 3D stereoscopic images since the release of 3D stereoscopic film 'Avatar' in 2009. Universities have conducted research on and studied 3D stereoscopic image in various ways, and even university curriculums have adopted 3D stereoscopic image production courses. However, universities face many difficulties in purchasing expensive equipment including cameras and rigs for 3D stereoscopic image contents production training. This paper addresses the 3D stereoscopic image content production curriculum using software in university. A practical training course was carried out based on the theoretical contents and theories that must be dealt with in 3D stereoscopic image contents production curriculum. As a result, students could understand the principles of 3D stereoscopic image production and produce various 3D stereoscopic images using various software applications. In this parer, proper instructional methods for 3D stereoscopic image contents production in university are discussed through this production course.
저온동시소성용 감광성 은(Ag) 페이스트의 광식각 특성
박성대,김동국,강남기,박종철,강나민,임진규 한국세라믹학회 2004 한국세라믹학회지 Vol.41 No.4
Thick film photolithography is a new technology in that the lithography process such as exposure and development is applied to the conventional thick film process including screen-printing. In this research, low-temperature cofireable silver paste, which enabled the formation of thick film fine-line using photolithographic technology, was developed. The optimum composition for fine-line forming was studied by adjusting the amounts of silver powder, polymer and monomer, and the additional amount of photoinitiator, and then the effect of processing parameter such as exposing dose on the formation of fine-line was also tested. As the result, it was found that the ratio of polymer to monomer, silver powder loading, and the amount of photoinitiator were the main factors affecting the resolution of fine-line. The developed photosensitive silver paste was printed on low-temperature cofireable green sheet, then dried, exposed, developed in aqueous process, laminated, and fired. Results showed that the thick film fine-line under 20㎛ width could be obtained after cofiring. 후막 광식각 기술은 스크린 인쇄 등의 일반적인 후막공정에 노광 및 현상 등의 리소그라피 공정을 접목시킨 새로운 기술이다. 본 연구에서는 후막 광식각 기술을 이용하여 미세라인을 형성할 수 있는 저온동시소성용 Ag 페이스트를 개발하였다. 페이스트를 구성 하는 Ag 분말과 폴리머, 모노머, 광개시제 등의 양을 조절하여 미세라인을 형성할 수 있는 최적 조성을 연구하였으며, 또한 노광량과 같은 공정변수가 미세라인 형성에 미치는 영향을 연구하였다. 실험결과 폴리머/모노머 비, Ag 분말 중량비, 광개시제의 양 등이 미세라인의 해상도에 영향을 미치는 주요 인자임을 확인할 수 있었다. 개발된 감광성 Ag 페이스트를 저온동시소성용 그린 시트에 전면 인쇄한 후 건조, 노광, 현상, 적층, 소성 과정을 통하여, 소성 후 20㎛ 이하의 선폭을 가지는 후막 미세라인을 형성할 수 있었다.