http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
廣帶域 임팻다이오드 發振器의 바렉터에 依한 周波數變化特性
尹賢普 한국항공대학교 1975 論文集 Vol.8 No.-
負性抵抗特性을 갖이는 임팻다이오드를 使用한 廣帶域發振器의 特性을 理論的으로 고찰하고 實驗을 通하여 그 結果를 얻었다. 廣帶域特性을 얻기 위해 �포스(cap post) 共振器를 使用한다. 導波管 共振器의 容量變化를 얻기 위해 電子的 同調方式을 바렉터를 使用하는 경우 가변주파수 발진기 理論을 解析하였다. 테이퍼선로 (tapered line)를 使用한 結果 8.8~11GHz의 넓은 範圍에 걸쳐 發振하는 것을 관측할 수 있었다. 바렉터 용량을 變化시킨 결과 周波數는 120MHz 程度變化 하였다. 周波數變化에 따른 出力의 變化는 영바이어스에서 0.54mW, 30V 바이어스에서 0.175mW였다. 임팻다이오드에 흐르는 電流의 크기에 따른 周波數 變化도 測定하였다. This paper deals with the theory and experimental results of the wide band oscillation characteristics using IMPATT diode which has negative resistance. The wide band oscillation characteristics can be achieved using the cap post structure. The theory of variable frequency oscillation using varactor as an electronic tuning devices in the waveguide resonator described in detail. Using the tapered cap post, the resonance characteristics are observed to distribute through the scope ranging from 8.8 GHz to 11GHz. The frequency tuning is obtained over 120 MHz as a result of varactor tuning in X-band oscillator circuit. The output power as a function of oscillation frequency is varied within 0.54mW and 0.175mW for zero and 30V varactor bias respectively. The oscillation frequency variation depending upon bias current is also measured.
도파관캐비티를 사용한 임팻다이오드 발진기의 주파수변조특성
윤현보 대한전자공학회 1975 전자공학회지 Vol.12 No.6
임팻다이오드의 임지던스크기가 연류에 교류를 중첩시켜 가할경우 변화하는 특성을 고찰하였다. 스펙트럼분석기상에서 반송파영점측정방법으로 견파수변조된 파의 특성을 측달하였다. 각파수변조는 아주 작은 교류신호전압으로 가능하며 변조주파수를 일정히하고 신호전압을 증가시키면 소요대역폭이 아주 커지고 신호전압을 일정히하고 변조각파수를 작게할때 대역건은 약간 좁아지는 결과를 얻었다. This paper dells with the impedance variations of the IMPATT diode depending upon the small a.c. coomponent superimposed on the d.c. bias. The frequency deviation of the modulated wave is measured using a carrier null method on microwave spectrum analyser. Frequency modulation is achieved by the weack a.c. signal superimposed on the d.c. bias. The bandwidth rapidly increase with increasing modulation signal magnitude for constant modulation frquency and slightly decrease with decreasing modulation frequency for constant modulation signal magnitude. This paper dells with the impedance variations of the IMPATT diode depending upon the small a.c. coomponent superimposed on the d.c. bias. The frequency deviation of the modulated wave is measured using a carrier null method on microwave spectrum analyser. Frequency modulation is achieved by the weack a.c. signal superimposed on the d.c. bias. The bandwidth rapidly increase with increasing modulation signal magnitude for constant modulation frquency and slightly decrease with decreasing modulation frequency for constant modulation signal magnitude.
Planar Waveguide 모델을 이용한 마이크로 스트립선로의 하이브리드 모드 분산특성 계산
윤현보,고성선,백낙준 한국통신학회 1987 韓國通信學會論文誌 Vol.12 No.1
하이브리드 모드 마이크로 스트립 線路에서 周波數의 函數인 實效誘電率 및 實效幅에 따른 正規化 位相速度와 特性 임피던스의 分散特性을 計算하기 爲한 Planar Waveguide 모델이 提示되었으며. Eeff(f)와 Weff(f)는 周波數에 따른 實驗關係式과 CAD를 目的으로 設定된 計算式을 利用하여 Planar Waveguide모델 計算에 適用하였고, 多樣한 比誘電率과 스트립 幅/基板 두께(W/h)는 $0.5$\leq$W/h\leq2.5의$ 比를 使用하여, 그 結果를 稱的値, Spectral domain 解析 및 實驗關係 結果 等과 比較하였다. 컴퓨터 시뮬레이션 結果, Planar Waveguide 모델을 利用할 境遇가 이미 發表된 바 있는 다른 方法보다 周波數가 增加함에 따라 周波數 別 正規化 位相速度는 1/ 의 값에 가장 接近하였고 特性 임피던스는 더욱 增加하였다. 또한, CAD를 目的으로 設定된 Eeff(f)를 本 提案 모델이 適用한 境遇가 實驗關係式을 利用한 境遇보다 더 좋은 結果를 얻을 수 있었다. A planar waveguide model is presented for calculating dispersion characteristics of the normalized phase velocity and characteristic impedance with the frequency dependent effective dielectric constand and effective width in microstrip lines of the hybrid mode. Eeff(f) and Weff(f) are applied to a planar waveguide model by using an empirical relations and formula designed for CAD purposes as a function of frequency. A wide range of relative dielectric constants and the strip $h_{width}$strate height(W/h ratios), $0.5$\leq$W/h\leq2.5$ are used. These results are compared with static value, spectral domain analysis, and empirical results. As the result of a computer simulation, in the case of using a planar waveguide model, the frequency dependent normalized phase velocity is more closely approached to 1/ and characteristic impedance is more increased than the other method that has already been presented as the increasing of the frequency. And, the case of applying Eeff(f) designed for the purpose of CAD to this proposed model is show in better result than the case of using a empirical relations.
윤현보,박희창 한국통신학회 1987 韓國通信學會論文誌 Vol.12 No.5
An adaptive estimation system which operates propoerly in the environments corrupted by additive impulse noise in addition to the white Gaussian noise has been proposed. A feed forward loop is inserted into the adaptive estimator proposed by R. L. Moose for a system with an unknown measurement bias by which the improved adaptive estimator is processed successfully without the sum of the time varying weights being zero even when the measurement system is added impulue noise. Successfully processed adaptive estimator has been obtained under the large impulse noise in addition to randomly varying unknown biases condition by giving sufficient large value to the elements of discrete vector on the computer simulation. 백색 잡음에 알 수 없는 크기를 갖는 바이어스와 충격성 잡음이 부가되어 혼입되는 상황에서 적절한 동작특성을 갖는 적응 추정 계통을 제안하였다 측정계통에 알 수 없는 바이어스가 인가되었을 때 R.L.Moose에 의해 제안된 적응 추정 이론에 Feed Forward Loop를 부가 삽입하여 충격성 잡음이 혼입되었을 때도 시간 변화 가중치(Time Varying Weights)의 합이 0이 되지 않고 적응 추정이 가능한 방법이다. 추정 기준 벡터의 요소 값들을 충분히 큰 값을 줄 수 있어 측정 신호에 부가된 어떤 크기의 바이어스와 충격성 잡음에도 적응 추정이 중단되지 않고 효율적으로 진행되는 컴퓨터 시뮬레이션 결과를 얻었다.