http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Ecotoxicity of heat-treated Kapur and Japanese larch
Salim, Sabiha,Ashaari, Zaidon,Choi, Yong-Seok,Cho, Kijong,Jung, Jinho,Kim, Gyu-Hyeok Springer-Verlag 2016 European journal of wood and wood products Vol.74 No.2
<P>Kapur (Dryobalanops sp.) and Japanese larch (Larix kaempferi) wood samples were heat-treated in air at 180 A degrees C for 24 and 48 h. Leaching and toxicity tests were conducted to determine the ecotoxicity effect of these heat-treated woods on the aquatic environment due to heat treatment. The toxicity of conventional preservative-treated woods, i.e. chromated copper arsenate (CCA) and ammoniacal copper quat (ACQ), was also determined for comparison purposes. Acute toxicity tests were performed using two aquatic organisms, Daphnia magna and Vibrio fischeri according to the Organization for Economic Co-operation and Development standard procedures and Microtox assay, respectively. Significantly low toxicity to D. magna was found for the heat-treated Kapur compared to that of untreated Kapur, while heat-treated Japanese larch did not show any toxicity effect. As expected, ACQ-treated samples showed the highest toxicity to D. magna, followed by that of CCA, though toxicity of both preservative-treated woods further reduced over time. Hence, heat treatment of Kapur and Japanese larch were believed to be not harmful to the aquatic ecosystem.</P>
생산공정 현장실사를 통한 수입 집성재로부터 규제해충 검출 원인 조사
김민지 ( Min Ji Kim ),신현경 ( Hyun Kyeong Shin ),최용석 ( Yong Seok Choi ),( Sabiha Salim ),김규혁 ( Gyu Hyeok Kim ) 한국목재공학회 2016 목재공학 Vol.44 No.5
본 연구는 규제해충(이하 해충이라 칭함) 검출 건수 상위 3개국인 말레이시아, 인도네시아, 중국의 집성재 생산업체에 대한 현장실사를 통해 해충 검출 원인을 파악하여 검역 안전성 확보를 위한 적정 집성재 생산공정을 제시하고자 수행되었다. 현장실사 결과, 수입 집성재로부터 해충 검출은 생산공정상의 문제(층재의 천연건조 또는 미흡한 열기건조, 건조 층재의 부적절한 보관, 집성재의 불완전 포장)로 확인되었다. 특히 중국은 오동나무 층재를 전적으로 천연건 조하는 점을 비롯하여 생산공정이 전반적으로 가장 불량하였다. 향후 수입 집성재의 검역 안전성을 확보하기 위해서는 수입업체 스스로 해외 생산업체에 층재에 기 서식하던 해충의 구제가 가능하면서 동시에 건조 층재나 완제품인 집성재에 대한 해충 가해를 예방할 수 있는 타당한 집성재 생산공정(층재의 적절한 열기건조, 집성접착 전까지 건조 층재의 밀봉 보관, 집성재의 밀봉 포장)의 적용을 요구하여 수입 집성재로부터 해충이 검출되지 않도록해야 할 것이다. On-site survey on glue-laminated board (GLB) manufacturers of Malaysia, Indonesia, and China was conducted to identify the cause of interception of regulated pest from imported GLBs from those countries, and to suggest optimal manufacturing processes of GLB for preventing quarantine risk associated with imported GLBs. The cause of pest interception was improper manufacturing processes, such as air drying or inadequate kiln drying of green laminae, improper storage of dried laminae before finger jointing and edge gluing, and/or incomplete packing of GLBs. In particular, Paulownia GLB manufacturing processes used in China, including air drying of laminae, were mostly poor in terms of preventing quarantine risk associated with imported GLBs. From now on, for preventing quarantine risk associated with imported GLBs, importers have to ask foreign manufacturers spontaneously to use proper manufacturing processes (adequate kiln drying of green laminae, proper storage of dried laminae, and complete packaging of final GLBs).