팽창 줄눈 특성에 따른 Blow-up 발생시기 및 위치 예측

안희락,김영규,이승우 한국도로학회 2024 한국도로학회논문집 Vol.26 No.2

PURPOSES : High temperatures induce excessive expansion in pavements, thus causing the closure of contraction joints between expansion joints. This results in the integration of slabs within the expansion joints into a unified slab. Compressive forces are generated owing to the friction that ensues between the unified slab and lower base layer. As the integrated slab expands and exceeds the allowable width of the expansion joint, the end restraint generates an additional compressive force. The escalating force, which reaches a critical threshold, induces buckling, thus compromising stability and causing blow-up incidents, which poses a significant hazard to road users. The unpredictable nature of blow-up incidents render their accurate prediction challenging because the compressive force within the slab must be predicted and the threshold for blow-up occurrence must be determined. METHODS : In this study, a GWNU blow-up model was developed to predict both the compressive force and period of blow-up incidents in jointed concrete pavements. The climate conditions, pavement structure, materials, and expansion joints were considered in this model. In the first stage of the model, the time at which the integrated slab expanded and surpassed the allowable width of the expansion joint was determined, and the compressive force was calculated. Subsequently, the compressive force within the integrated slab, considering both the end restraints and friction, was predicted. A large-scale blow-up test was performed to measure the blow-up force based on changes in the geometric imperfections. The measured blow-up force was adopted as the blow-up occurrence threshold, and the point at which the predicted compressive force within the slab exceeded the blow-up force was identified as the blow-up occurrence time. RESULTS : Using the GWNU blow-up model, the blow-up occurrence on the Seohean Expressway in Korea is predicted in the presence or absence of the alkali-silica reaction (ASR). Analysis is conducted using the expansion joint spacing and width as variables. As the expansion joint spacing increases, blow-up occurs sooner, and as the width increases, only the expansion joint life decreases. When applying an expansion joint spacing of 300 m and a width of 100 mm under an ASR with 99.9% TTPG reliability, the sum of the expansion joint life and blow-up occurrence time is 16 years. CONCLUSIONS : In the case of jointed concrete pavements where ASR occurred, installing an expansion joint spacing of 300 m and a width of 100 mm does not satisfy the design life of 20 years, and the expansion joint width minimally affect the blow-up occurrence time. To prevent blow-up incidents, a spacing of less than 300 m for the expansion joint is recommended. Based on the analysis results, the blow-up occurrence time and location can be predicted from the characteristics of the installed expansion joint, through which blow-up incidents can be prevented via preliminary maintenance.

기상과 재료 특성에 의한 공항 콘크리트 포장 팽창줄눈 간격의 적정성 검토

박해원,정진훈 한국도로학회 2018 한국도로학회논문집 Vol.20 No.3

PURPOSES : In this study, the propriety of expansion joint spacing of airport concrete pavement was examined by using weather and material characteristics. METHODS: A finite element model for simulating airport concrete pavement was developed and blowup occurrence due to temperature increase was analyzed. The critical temperature causing the expansion of concrete slab and blow up at the expansion joint was calculated according to the initial vertical displacement at the joint. The amount of expansion that can occur in the concrete slab for 20 years of design life was calculated by summing the expansion and contraction by temperature, alkali-silica reaction, and drying shrinkage. The effective expansion of pavement section between adjacent expansion joints was calculated by subtracting the effective width of expansion joint from the summation of the expansion of the pavement section. The temperature change causing the effective expansion of pavement section was also calculated. The effective expansion equivalent temperature change was compared to the critical temperature, which causes the blowup, according to expansion joint spacing to verify the propriety of expansion joint applied to the airport concrete pavement. RESULTS: When an initial vertical displacement of the expansion joint was 3mm or less, the blowup never occurred for 300m of joint spacing which is used in Korean airports currently. But, there was a risk of blow-up when an initial vertical displacement of the expansion joint was 5mm or more due to the weather or material characteristics. CONCLUSIONS: It was confirmed that the intial vertical displacement at the expansion joint could be managed below 3mm from the previous research results. Accordingly it was concluded that the 300m of current expansion joint spacing of Korean airports could be used without blowup by controling the alkali-silica reaction below its allowable limit.

신축이음을 고려한 강교의 지진응답해석

손영호,김종주 경북대학교 2005 慶北專門大學 論文集 Vol.23 No.-

Bridges subjected to earthquake excitations tend to experience large cyclic deformations in the supporting columns and the deck expansion joints. This type of behavior may cause cyclic yielding in the columns and repeated impact and separation of the expansion joints. Such behavior can cause the bridge to collapse or suffer severe damage. Even with the vast increase in the number of bridges, analysis on expansion joints have been ignored in most bridge analysis. The expansion joint provides flexibility in bridge, enabling the deck segments to move relative to each other and reducing the internal seismic forces in the deck and the supporting columns. And the bridge deck expansion joints have major effects on the seismic behavior of bridge sysetem. Therefore, it is critical that a realistic representation be used for the expansion joint dynamic behavior in order to obtain valid seismic responses of bridge. The current study carries out a seismic analysis with the consideration on expansion joints in the analytical model. Four different models for expansion joints have been studied : (1) rigid frmae model, (2) end releases frame model, (3) equal constranit joint model, and (4) NLlink element provided in sap2000 program.

새로운 매설형 신축이음장치의 성능 평가

홍성협,박상렬,좌용현 한국도로학회 2010 한국도로학회논문집 Vol.12 No.3

Asphalt Plug Joint(APJ) is an buried expansion joint that enabling the smooth connection of expansion gap and road pavement by filling the gap with bituminous mixture of 20% bitumen and 80% aggregate by weight, so it secures evenness and expansion or contraction using the material's properties. Although APJ is designed to have a 6-7 year lifecycle, there are some cases where it is damaged within the first six months. This early damage cause traffic congestion due to frequent repair works, and social cost exceeding the installation cost of the joint. So, in this research, we have developed a new system of Buried Folding Lattice Joint(BFLJ) which can overcome the disadvantages of APJ, and have analyzed and compared it's performance with the conventional APJ through experiment with specimens. As a result of the experiment, APJ had crack formation on both ends of the gap plate, spreading to the surface of the expansion joint. With this result, we can conclude that the reason for early damage is the tension failure due to the concentration of strain in the asphalt mixture along the end of gap plate and the debonding along the joint section. In contrast, the newly developed BFLJ induced even transformation in the joint by applying moving stud and high performance material, and resolved APJ's disadvantage of strain concentration. Therefore, it could be seen that the newly developed BFLJ could overcome the disadvantages of APJ and prevent early damage. Asphalt Plug Joint(APJ)는 통상 무게비로 20%의 역청(bitumen)과 80%의 골재로 구성된 역청 혼합물을 이용하여 포장 사이의신축이음부를 메꾸는 형태의 신축이음장치로, 도로 포장과 신축이음부의 매끄러운 연결을 가능케 하여 평탄성을 확보하면서 재료의특성을 이용하여 교량 상판의 신축을 자체적으로 흡수하도록 되어 있는 매설형 신축이음장치이다. 그러나 APJ은 6-7년의 사용주기를 가지고 설계되지만 때때로 시공 후 6개월 내에 조기파손의 사례가 나타나고 있다. 이러한 조기파손은 잦은 보수 공사로 인한 교통정체 등을 유발하며 이로 인한 사회적 비용은 이음장치의 설치비용을 훨씬 상회한다. 이에 본 연구에서는 APJ의 단점을 극복할 수 있는 새로운 시스템인 Buried Folding Lattice Joint(BFLJ)을 개발하였고 시험체를 제작하여 실험을 통해 기존 시스템과 성능을 비교₩분석하였다. 실험결과 APJ는 신축에 의하여 철판 양끝에서 변형이 발생하여 표면으로 확산되었다. 이 결과로 철판 끝을 따라 발생하는 아스팔트 혼합물의 변형집중으로 인한 인장균열과 접합부의 부착파괴 현상이 발생하였으며 이것이 조기파손의 원인이 된다는 것을 알 수 있었다. 반면 새로 개발된 BFLJ의 경우는 움직이는 스터드를 사용하고 고성능 재료를 사용함으로써 조인트 전체에 고른 변형을 유도하여 APJ의 변형집중의 단점을 해소할 수 있었다. 이에 새로 개발된 BFLJ는 APJ의 문제점을 극복하고 조기파손을 예방할수 있을 것이라 판단된다.

제3궤조 전차선의 신축장치(Expansion Joint)작용에 관한 고찰

박성국(Sung-Kook Park),장영환(Yeong-Hwan Jang),안천헌(Cheon-Heon An),김충수(Chung-Soo Kim) 한국철도학회 2012 한국철도학회 학술발표대회논문집 Vol.2012 No.10

제3궤조 전차선 급전레일은 주위온도와 전류로 인하여 발생하는 열 때문에 길이 방향으로 신축변화하며, 그로 인한 각각의 급전레일들 사이에 기계적, 전기적 문제가 발생하지 않도록 하기 위하여 길이 변화를 수용할 수 있는 신축장치(Expansion Joint)를 사용한다.최근 신설되는 경량전철은 제3궤조 전차선 급전방식을 주로 적용하고 있으나, 급전레일온도에 따른 관리 및 유지보수기준이 명확하게 제시되지 않고 있다. 또한, 영업운전으로 인한 급전레일 급전중에는 신축장치의 상태변화를 확인할 수 있는 시스템이 구축되어 있지 않으므로, 검측을 통하여 측정된 데이터를 분석하여 최악의 환경에서도 장비성능을 유지하며 운용되는지 검증할 필요가 있다. 본 논문에서는 제3궤조 전차선의 운용경험을 토대로 급전레일의 온도변화에 따른 신축변화를 조사·분석하였다. 그 일련의 과정들을 통해 신축장치의 신축량 조사·분석 방법과 분석결과에 따른 신축장치의 유지보수기준 적용 방법을 제시하고자 한다. The third rail of conductor rail occur the rail expansion and contraction to length direction by surrounding temperature and electric current produced heat. In order to avoid both mechanical and electronic problem between each of the conductor rail, expansion joint normally is used to accommodate the change of the length. Lately, the newly created light rail transit is mainly applied the third rail of conductor rail with method of electric supply, the standards which include management and maintenance according to temperature change of conductor rail is not presented clearly yet. Besides, during the supply of power that conductor rail by business driving, the system which Inspect variable of expansion joint is not constructed. Therefore, it should be examining status of expansion joint even in the worst of circumstances maintaining and working capabilities instruments through analyzing measurements data. In this thesis examined and analyzed the rail expansion and contraction based on the management experience about the third rail of conductor rail. We kindly suggest the method of investigation and analysis that amount of expansion about expansion joint. And also, the standard application method of administration and maintenance of expansion joint in accordance with analytical researches through a series of those process as well.

RC 슬래브교의 신축이음 손상과 바닥판 응답과의 상관관계 분석

정현진 ( Hyun-jin Jung ),안효준 ( Hyo-joon An ),박기태 ( Ki-tae Park ),정규산 ( Kyu-san Jung ),김유희 ( Yu-hee Kim ),이종한 ( Jong-han Lee ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 논문집 Vol.25 No.6

우리나라 노후화 교량 중 많은 부분을 차지하는 RC 슬래브 교량은 대부분이 교량 안전 관리 및 유지관리의 대상인 1, 2종 교량에 포함되지 않는다. 또한 고속도로 교량에서 가장 높은 손상율을 차지하는 부속시설은 신축이음과 교량 받침부이다. 특히, 신축이음부를 통한 누수는 콘크리트 교량의 열화를 유발하고 균열 및 철근부 노출 등의 원인이 된다. 따라서 본 연구에서는 RC 슬래브교의 신축이음부 유간 밀착 손상이 바닥판 응답에 미치는 영향을 분석하였다. 양단 신축이음의 유간이 밀착된 경우 바닥판의 교축방향 변위가 발생되지 못해, 양쪽 단부 콘크리트에서 균열이 발생하였다. 또한, 응답 결과를 바탕으로 손상시나리오 별 신축이음부의 교축방향 변위와 바닥판 양단 콘크리트 응력과의 상관관계를 분석하고, 손상발생이 교량 거동에 미치는 영향을 파악하였다. 신축이음 장치 양면손상이 발생한 경우 변위와 응력과의 상관관계는 차량이 모든 차선을 지날 때 0.18로 낮은 상관성을 보였다. 무손상 상태와 비교했을 때도 바닥판 처짐은 차량이 지나는 동안 0.34~0.53, 차량이 지나간 후 0.17~0.43으로 낮은 상관성을 보였다. 이는 단부 콘크리트의 균열 발생으로 바닥판 전체 거동에 변화가 생긴 것을 의미한다. 따라서 바닥판 응답 데이터 기반 상관관계 분석과 이를 활용한 데이터 기반의 손상탐지가 가능하며, 이를 통해 바닥판 손상 및 열화의 원인이 되는 신축이음부의 조기 보수 및 보강, 사전관리에 기여하여 많은 도움이 될 것으로 기대된다. RC slab bridges account for the largest portion of deteriorated bridges in Korea. However, most RC slabs are not included in the first and second classes of bridges, which are subject to bridge safety management and maintenance. The highest damaged components in highway bridges are the subsidiary facilities including expansion joints and bearings. In particular, leakage through expansion joints causes deterioration and cracks of concrete and exposure of reinforced bars. Therefore, this study analyzed the effect of adhesion damage at expansion joints on the response of the deck in RC slab bridges. When the spacing between the expansion joints at both ends was closely adhered, cracks occurred in the concrete at both ends of the deck due to the resistance rigidity at the expansion joints. Based on the response results, the correlation analysis between displacements in the longitudinal direction of the expansion joint and concrete stress at both ends of the deck for each damage scenario was performed to investigate the effect of the occurrence of damage on the bridge behavior. When expansion joint devices at both sides were damaged, the correlation between displacement and stress showed a low correlation of 0.18 when the vehicles proceeded along all the lanes. Compared with those in the intact state, the deflections of the deck in the damaged case at both sides showed a low correlation of 0.34 to 0.53 while the vehicle passed and 0.17 to 0.43 after the vehicle passed. This means that the occurrence of cracks in the ends of concrete changed the behavior of the deck. Therefore, data-deriven damage detection could be developed to manage the damage to expansion joints that cause damage and deterioration of the deck.

윤하중 재하에 의한 교량 신축이음의 정적거동

김영진(Kim Youngjin),곽임종(Kwak Imjong),조창백(Cho Changbeck),윤혜진(Yoon Hyejin) 대한토목학회 2008 대한토목학회논문집 A Vol.28 No.3A

본 연구는 교량 신축이음에 대해서 윤하중 재하실험을 통해 윤하중 재하 특성을 분석하고 이를 토대로 신축이음에서의 윤하중 재하기준을 마련하는 기초데이터를 확보하고자 실시하였다. 이를 위해 국내에서 많이 사용되고 있는 레일신축이음과 핑거신축이음에 대하여 시험체를 제작하고 실제 타이어 바퀴를 사용한 정적 윤하중 재하실험을 실시하였다. 윤하중에 접촉된 레일과 핑거에서 윤하중 분배율을 파악하였는데, 레일신축이음에서 중앙 레일이 지지하는 분담율은 윤하중 크기가 증가함에 따라 감소하는 것으로 나타났고 핑거신축이음에서는 접촉 면적 증가에 따라 거의 증가하지 않고 일정하게 됨을 알 수 있었다. 윤하중 재하 특성이 기존 설계기준과 많은 차이를 나타내고 있으므로 신축이음 설계를 위한 윤하중 접지압력 분포에 대한 합리적인 기준 마련이 필요하다고 판단되었다. This study addresses the analysis of the behavioral characteristics of bridge expansion joints under wheel loading through wheel load test and the proposal of relevant wheel load specifications for expansion joints. To that goal, specimens of rail and finger expansion joints that are widely used in Korea were fabricated and subjected to static wheel load test using a real tire wheel. The wheel load distribution factor in the rail and finger expansion joints in contact with the wheel load was evaluated. The evaluation revealed that the portion of load sustained by the central rail of rail expansion joint was decreasing with larger wheel load, and that the portion of load sustained by the finger expansion joint was practically insensitive to the increase of the contact area and remained nearly constant. Since the wheel load characteristics showed large difference compared to former design specifications, it appears necessary to prepare rational specifications relative to the distribution of the wheel load contact pressure for the design of expansion joints.

가변형 핑거 조인트를 가지는 신축이음장치의 구조 성능 실험

유성원 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 논문집 Vol.22 No.6

내진 성능 학보를 위해서는 신축이음장치가 지진력에 대하여 적절한 변형이 발생하여 신축이음장치의 파괴를 방지하여야 하는데 최근에 국내에서 신축이음장치의 핑거부에 힌지를 설치하여 교축방향의 지진력에 대한 변위 저항성을 확보한 신제품이 개발되고 있다. 이에 본 논문에서는 가변형 핑거 조인트를 가지는 신축이음장치에 대하여 실물규모의 교축직각방향 하중에 대한 저항성을 실험적으로 평가하였다. 실험결과, 최대 수평변위는 기존 신축이음 실험체의 경우 약 21.1mm, 내진 신축이음 실험체의 경우 51.00mm로 나타났으며, 기존제품은 추가적으로 16.5mm의 솟음이 발생되었다. 기존 신축이음 실험체는 어느 정도의 교축직각 방향의 하중에 대하여 저항한 후, 핑거의 휨 및 전단 변형이 과도하게 발생되며 파단 현상이 발생할 가능성이 있을 것으로 추정된다. 반면에 내진 신축이음 실험체의 경우, 교축 직각방향의 하중에 대하여 하중에 대한 변형을 핑거의 힌지가 흡수하여 신축이음장치 및 상부구조에 응력을 발생시키지 않고 다만 하중 작용방향으로의 수평 변형만 발생시킬 것으로 예상된다. For the seismic performance, it is necessary to prevent the destruction of the expansion joint device due to the appropriate deformation of the expansion joint device due to the seismic force. Recently, the hinge is installed on the fingering of the expansion joint device in Korea, New products are being developed. In this paper, we have experimentally evaluated the real scale resistance of the expansion joints with rotational finger joints against load at right angle to the bridge axis. Experimental results show that the maximum horizontal displacement is about 21.1mm for conventional stretch joints and 51.00mm for seismic stretch joints. It is presumed that the existing expansion joint test specimen is resistant to the load in a direction perpendicular to the throat axis, and then the bending and shear deformation of the finger are excessively generated and the fracture phenomenon is likely to occur. On the other hand, in the case of the seismic expansion joint, the deformation of the load due to the load is absorbed by the hinge of the finger with respect to the load in the direction perpendicular to the throat, so that only horizontal deformation in the direction of load action.

신축조인트의 최적화형상에 대한 연구

한문식(Moonsik Han),안정현(Junghyun Ahn),양철호(Chulho Yang) 한국자동차공학회 2013 한국 자동차공학회논문집 Vol.21 No.2

Expansion joint has been utilized in many areas including automotive bellows for exhaust system. Usage of expansion joint has been increased due to its inherent flexibility and excellent anti-vibration property. Simple shape of expansion joint is modeled to understand the behavior of joint system. 27 design cases using 3 design factors with 3 levels are constructed by design of experiment. Each case is simulated to find the most influential design factors. Response for this study, maximum stress in the expansion joint, has been used to determine main design factors of joint. Among the 3 design factors, factor B has affected greatly a response in the formation of optimum shape of joint. Also, interaction factor, A×B, has also showed its influence to the response of joint. This study showed that design of experiment combined with finite element analysis could be used in the design decision process effectively in the design of expansion joint.

디지털 유지관리를 위한 데이터 기반 교량 신축이음 유간 평가

박종호,신유성 한국구조물진단유지관리공학회 2024 한국구조물진단유지관리공학회 논문집 Vol.28 No.2

신축이음 장치는 교량 상부구조의 신축량을 수용할 목적으로 설치되며 공용중 충분한 유간을 확보하여야 한다. 안전점검 및 정밀안전진단 수행 시 유간부족 및 유간과다에 대한 손상을 명시하고 있으나, 유간에 따른 교량의 이상 거동을 판별하기 위한 기준이 미흡하다. 본연구에서는 동일 신축이음부의 유간 데이터를 지속적으로 추적하여 데이터 기반의 유지관리 방안을 제시하였다. 689개소의 신축이음 장치에서 계절별 영향을 고려하여 총 2,756개의 유간 데이터를 수집하였다. 동일 위치에서 4개 이상의 데이터를 통해 신축거동을 분석할 수 있는 유간변화 평가 방안을 마련하였으며, 신축거동에 영향을 미치는 인자를 분류하고 딥러닝과 설명 가능한 AI를 통해 각 인자의 영향도를 분석하였다. 유간 평가 그래프를 통해 교량 상부구조의 이상 거동을 협착 및 기능 고장으로 분류하였다. 이론적 거동을 보이고 있다하더라도 협착 가능성이나타날 수 있는 사례 및 하절기 협착 가능성이 매우 높게 나타난 사례가 도출되었다. 협착 가능성은 낮으나 교량 상부구조에 기능상 문제점이발생했을 가능성이 높은 사례와 시공오류에 따라 신축이음 장치가 재시공된 사례도 도출되었다. 딥러닝 및 설명 가능한 AI를 통한 영향인자 분석은 기존의 신축유간 계산식 및 교량 설계에 따른 결과로 설명 가능하여 신뢰 가능한 수준으로 판단되어 추후 모델의 개선을 통해 유지관리를위한 가이드를 제시할 수 있을 것이라 판단된다. The expansion joint is installed to offset the expansion of the superstructure and must ensure sufficient gap during its service life. In detailed guideline of safety inspection and precise safety diagnosis for bridge, damage due to lack or excessive gap is specified, but there are insufficient standards for determining the abnormal behavior of superstructures. In this study, a data-based maintenance was proposed by continuously monitoring the expansion-gap data of the same expansion joint. A total of 2,756 data were collected from 689 expansion joint, taking into account the effects of season. We have developed a method to evaluate changes in the expansion joint-gap that can analyze the thermal movement through four or more data at the same location, and classified the factors that affect the superstructure behavior and analyze the influence of each factor through deep learning and explainable artificial intelligence(AI). Abnormal behavior of the superstructure was classified into narrowing and functional failure through the expansion joint-gap evaluation graph. The influence factor analysis using deep learning and explainable AI is considered to be reliable because the results can be explained by the existing expansion gap calculation formula and bridge design.