http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Y.G. Xiao,M.H. Tang,Y. Xiong,J. C. Lin,C.P. Cheng,B. Jiang,H.Q. Cai,Z.H. Tang,X.S. Lv,X.C. Gu,Y.C. Zhou 한국물리학회 2012 Current Applied Physics Vol.12 No.6
The surface potential and drain current of double-gate metal-ferroelectric-insulator-semiconductor (MFIS) field-effect transistor were investigated by using the ferroelectric negative capacitance. The derived results demonstrated that the up-converted semiconductor surface potential and low subthreshold swing S = 34 (<60 mV/dec) can be realized with appropriate thicknesses of ferroelectric thin film and insulator layer at room temperature. What’s more, a reduction gate voltage about 260 mV can be reached if the ON-state current is fixed to 600 mA/mm. It is expected that the derived results can offer useful guidelines for the application of low power dissipation in ongoing scaling of FETs.
Chu, X.Z.,Cheng, Z.P.,Xiang, X.X.,Xu, J.M.,Zhao, Y.J.,Zhang, W.G.,Lv, J.S.,Zhou, Y.P.,Zhou, L.,Moon, D.K.,Lee, C.H. Pergamon Press ; Elsevier Science Ltd 2014 International journal of hydrogen energy Vol.39 No.9
The separation of a hydrogen isotope mixture on porous materials was studied using equilibrium and breakthrough experiments. The adsorption equilibria of H<SUB>2</SUB> and D<SUB>2</SUB> on SBA-15 with mesopores and molecular sieves 5A, Y, and 10X with micropores were measured at 77 K using the volumetric method. The breakthrough experiments of a H<SUB>2</SUB> and D<SUB>2</SUB> mixture in each adsorbent bed were carried out at various conditions of flow rate and pressure. The equilibrium ratio of D<SUB>2</SUB> to H<SUB>2</SUB> on mesoporous molecular sieves was larger than the ratio on microporous molecular sieves (SBA-15 > 10X > Y > 5A), but the difference among the adsorbents decreased with increases in pressure. On the other hand, the order of breakthrough separation factor showed the opposite result (SBA-15 < 10X < Y < 5A). The breakthrough separation factors for zeolite 10X was approximately equal to the equilibrium ratio of D<SUB>2</SUB> to H<SUB>2</SUB> at the corresponding partial pressures, whereas zeolites 5A and Y showed higher breakthrough separation factors than their equilibrium ratios. In SBA-15, the separation factors from breakthrough results were even smaller than the corresponding equilibrium ratio. In the microporous adsorbent with a limited pore size (zeolite 5A in the study), the diffusion mechanism contributed to the separation of hydrogen isotope gases as one of key factors.
Influence of Sr substitution on thermoelectric properties of La1−xSrxFeO3 ceramics
H.C. Wang,C.L. Wang,J.L. Zhang,W.B. Su,J. Liu,M.L. Zhao,N. Yin,Y.G. Lv,L.M. Mei 한국물리학회 2010 Current Applied Physics Vol.10 No.3
Perovskite La1-xSrxFeO3 (0.10 ≤ x ≤ 0.20) ceramics have been synthesized by the conventional solid-state reaction technique. Their electrical resistivity, Seebeck coefficient and thermal conductivity have been measured. It has been found that the increase of Sr content reduces significantly both the electrical resistivity and the Seebeck coefficient, but slightly increases the high-temperature thermal conductivity. An adiabatic hopping conduction mechanism of small polaron is suggested from the analysis of the temperature dependence of the electrical resistivity. Seebeck coefficients decrease with increasing temperature,and saturate at temperature above 573 K. The saturated value of Seebeck coefficient decreases with increasing of Sr contents, from 200 μV/K for x = 0.10 to 100 μV/K for x = 0.20. All samples exhibit lower thermal conductivity with values around 2.6 W/m K. The highest dimensionless figure of merit is 0.031at temperature 973 K in La0.88Sr0.12FeO3.