http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
High-Throughput Multi-Threaded Non-binary LDPC Decoder Architecture
Thang Xuan Pham,Tuy Nguyen Tan,Phap Duong-Ngoc,Huyen Pham Thi,Hanho Lee 한국차세대컴퓨팅학회 2021 한국차세대컴퓨팅학회 학술대회 Vol.2021 No.11
This paper introduces an efficient non-binary low-density parity-check (NB-LDPC) decoder architecture, in terms of increasing decoding throughput. By taking advantages of non-binary quasi-cyclic LDPC codes, a new layered decoding algorithm and corresponding efficient hardware architecture are introduced. The proposed method can improve parallelism in decoding estimations of NB-LDPC decoder while remaining error-correcting performance. The implementations results confirmed that the proposed decoder with two threads can achieve a throughput of about 2.78 Gbps, which is around 1.63 times faster than that of the state-of-the-art decoder at almost the same hardware efficiency.
Pham Thi Thanh,Nguyen Van Duong,Nguyen Hai Yen,Nguyen Huy Ngoc,Nguyen Mau Lam,Kieu Xuan Hau,유성조,Nguyen Huy Dan 한국물리학회 2018 Current Applied Physics Vol.18 No.3
In this work, we investigated the influence of additional compounds of Nd-Cu-Al, Dy-Nb-Al, Dy-Zr-Al and Nb-Cu-Al on coercivity of sintered Nd-Fe-B magnets. The additional nanoparticles with size in the range of 40e80 nmwas mixed with the micrometer Nd-Fe-B powder before sintering process. The results show that the coercivity of the sintered Nd-Fe-B magnets can be improved by introducing additional nanoparticles to their grain boundaries. The improvement of the coercivity of the magnets is clearly dependent on composition and fraction of the additional compounds. While the Dy-Nb-Al, Dy-Zr-Al and Nb-Cu-Al compounds degrade the coercivity of the sintered Nd-Fe-B magnets, the Nd-Cu-Al nanoparticles considerably improve this quantity. The coercivity the sintered Nd16.5Fe77B6.5 magnets has been enhanced about 40% by adding 3 wt% of the Dy-free compound of Nd40Cu30Al30.
Kinematic Modeling of Spherical Rolling Robots with a Three-Omnidirectional-Wheel Drive Mechanism
Pham Dinh Ba,Quoc Dong Hoang,Soon-Geul Lee,Thanh Hai Nguyen,Xuan Quang Duong,Boi Chau Tham 제어로봇시스템학회 2020 제어로봇시스템학회 국제학술대회 논문집 Vol.2020 No.10
The spherical rolling robot (SRR) is an underactuated system with nonholonomic constraints. The proposed drive mechanism for the mobile robot is comprised of three omnidirectional wheels to make the omnidirectional movement of the robot on the floor. The kinematic model of the SRR is derived via nonholonomic constraints. Numerical simulation is analyzed. Results indicate that the robot can track the desired trajectory and maintain its balance stably at the same time.
( Thuy Duong Nguyen ),( Boi An Tran ),( Ke Oanh Vu ),( Anh Son Nguyen ),( Anh Truc Trinh ),( Gia Vu Pham ),( Thi Xuan Hang To ),( Thanh Thao Phan ) 한국부식방식학회(구 한국부식학회) 2020 Corrosion Science and Technology Vol.19 No.2
This work examined the corrosion protection performance of benzoate loaded hydrotalcite/graphene oxide (HT/GO-BZ) for carbon steel. HT/GO-BZ was fabricated by the co-precipitation method and characterized by infrared spectroscopy, X-ray diffraction, and scanning electronic microscopy. The corrosion inhibition action of HT/GO-BZ on carbon steel in 0.1 M NaCl solution was evaluated by electrochemical measurements. The benzoate content in HT/GO-BZ was determined by UV-Vis spectroscopy. Subsequently, the effect of HT/GO-BZ on the corrosion resistance of the water-based epoxy coating was investigated by the salt spray test. The obtained results demonstrated the intercalation of benzoate and GO in the hydrotalcite structure. The benzoate content in HT/GO-BZ was about 16%. The polarization curves of the carbon steel electrode revealed anodic corrosion inhibition activity of HT/GO-BZ and the inhibition efficiency was about 95.2% at a concentration of 3g/L. The GO present in HT/GO-BZ enhanced the inhibition effect of HT-BZ. The presence of HT/GO-BZ improved the corrosion resistance of the waterborne epoxy coating.
The Influence of Hydrotalcite Intercalated with Benzoate on UV Stability of Acrylic Coating
Thuy Duong Nguyen,Anh Son Nguyen,Thu Thuy Thai,Gia Vu Pham,Thi Xuan Hang To,Marie-Georges Olivier 한국부식방식학회 2020 Corrosion Science and Technology Vol.19 No.1
It is important to realize that benzoate was intercalated into hydrotalcite (HTC-Bz) by the co-precipitationmethod. In this case, acrylic coating with 0.5 wt% HTC-Bz was deposited on carbon steel using the spincoating method. Next, the HTC-Bz structure was characterized by Field emission scanning electron microscopy(FESEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). In fact, an ultravioletvision spectroscopy (UV-Vis) was used to determine the benzoate content in HTC-Bz, and the UV absorptionability of HTC-Bz. Using electrochemical techniques, water contact angle measurement, and thermal-gravimetricanalysis, we compared the protective properties before and after QUV test, hydrophobicity and the thermalstability of acrylic coating containing HTC-Bz. The obtained results showed that HTC-Bz with a plate-likestructure was successfully synthesized; benzoate was intercalated into the interlayer of hydrotalcite witha concentration of 28 wt%. Additionally, it was noted that HTC-Bz has an UV absorption peak at 225nm. In conclusion, the addition of HTC-Bz enhanced the UV stability, hydrophobicity and the thermal stabilityof acrylic coating.
( Thuy Duong Nguyen ),( Thu Thuy Pham ),( Anh Son Nguyen ),( Ke Oanh Vu ),( Gia Vu Pham ),( To Thi Xuan Hang ) 한국부식방식학회 2023 Corrosion Science and Technology Vol.22 No.1
This work studied the inhibitory effect of the combination of benzoate-intercalated hydrotalcite (HT-BZ) and Ce<sup>3+</sup>-loaded clay (Clay-Ce) on carbon steel (CS). HT-BZ was prepared by the co-precipitation method and Clay-Ce was fabricated by a cation exchange reaction. HT-BZ and Clay-Ce were assessed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) coupled with zeta potential measurement. Electrochemical measurements coupled with scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX) were used for studying the inhibitory action of the mixture of HT-BZ and Clay-Ce on steel electrodes immersed in 0.1 M NaCl. For comparison, the inhibitory effect of HT-BZ or Clay-Ce alone was also evaluated. The results showed that HT-BZ combined with Clay-Ce provided synergistic inhibition of the CS substrate. The mixture of 0.5 g/L HT-BZ + 0.5 g/L Clay-Ce provided 93.5% inhibition efficiency. The protective mechanism of the HT-BZ + Clay-Ce mixture consisted of the reaction of released BZ and Ce<sup>3+</sup> and the deposition of HT-BZ and Clay-Ce structures on the CS substrate.
NGUYEN, Xuan Hung,DANG, Thuy Quynh,DINH, Thi Thao Quyen,DO, Phuong Thanh,PHAM, Thu Uyen,MAI, Duc Duong Korea Distribution Science Association 2022 The Journal of Asian Finance, Economics and Busine Vol.9 No.6
The objective of this article is to assess the impact of corporate social responsibility (CSR) implementation on Corporate Brand Value (CBV) and Corporate Financial Performance (CFP). At the same time, the article examines the mediated role of CBV on the relationship between CSR implementation and CFP. In-depth interviews and observation techniques were used in this article on 4 experts to collect qualitative information. Quantitative analysis was based on primary data obtained from 454 employees working at enterprises providing Bancassurance services. The article uses various models of Cronbach's Alpha coefficient, Exploratory Factor Analysis (EFA), Confirmatory Factor Analysis (CFA), and Structural Equation Analysis (SEM) using SPSS 22.0 and AMOS 20.0 software. In addition, a 5-point Likert scale is used to measure observed variables. Research results show that CBV plays an intermediate role in the relationship between CSR implementation and CFP. At the same time, the implementation of CSR toward communities, customers, and workers directly impacts CBV and CFP. The article draws a new conclusion; there is no relationship found between the implementation of CSR and CFP. The result proposes implications for the state and Bancassurance service providers to develop and implement CSR-related policies and activities to enhance their brand value and financial performance.
Thanh, Pham Thi,Van Duong, Nguyen,Yen, Nguyen Hai,Ngoc, Nguyen Huy,Lam, Nguyen Mau,Hau, Kieu Xuan,Yu, Seong Cho,Dan, Nguyen Huy ELSEVIER 2018 CURRENT APPLIED PHYSICS Vol.18 No.3
<P>In this work, we investigated the influence of additional compounds of Nd-Cu-Al, Dy-Nb-Al, Dy-Zr-Al and Nb-Cu-Al on coercivity of sintered Nd-Fe-B magnets. The additional nanoparticles with size in the range of 40-80 nm was mixed with the micrometer Nd-Fe-B powder before sintering process. The results show that the coercivity of the sintered Nd-Fe-B magnets can be improved by introducing additional nanoparticles to their grain boundaries. The improvement of the coercivity of the magnets is clearly dependent on composition and fraction of the additional compounds. While the Dy-Nb-Al, Dy-Zr-Al and Nb-Cu-Al compounds degrade the coercivity of the sintered Nd-Fe-B magnets, the Nd-Cu-Al nanoparticles considerably improve this quantity. The coercivity the sintered Nd16.5Fe77B6.5 magnets has been enhanced about 40% by adding 3 wt% of the Dy-free compound of Nd40Cu30Al30. (C) 2017 Elsevier B.V. All rights reserved.</P>
Thuy Duong Nguyen,To Thi Xuan Hang,Thu Thuy Pham,Anh Son Nguyen,Thu Thuy Thai,Gia Vu Pham,Ngoc Bach Ta 한국부식방식학회 2022 Corrosion Science and Technology Vol.21 No.6
Corrosion inhibitors based on Zn-Al hydrotalcites containing benzoate (ZnAlHB) with different molar ratios of Zn/Al were prepared with a co-precipitation process. Compositions and structures of the resulting hydrotalcites were studied with suitable spectroscopic methods such as inductively coupled plasma mass spectrometry (ICP-MS), ultraviolet-visible spectrophotometry (UV-Vis), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and surface zeta potential measurements, respectively. Results of physico-chemical studies showed that crystallite sizes, compositions of products, and surface electrical properties were significantly changed when the molar ratio of Zn/Al was increased. The release of benzoate from hydrotalcites also differed slightly among samples. Anticorrosion abilities of hydrotalcites intercalated with benzoate at a concentration of 3 g/L on carbon steel were analyzed using electrochemical impedance spectroscopy (EIS), polarization curve, energy-dispersive X-ray spectroscopy (EDX), and SEM. Corrosion inhibition abilities of benzoate modified hydrotalcites in 0.1 M NaCl showed an upward trend with increasing Zn/Al ratio. The reason for the dependence of corrosion resistance on the Zn/Al ratio was discussed, including changes in the microstructure of hydrotalcites such as crystal size, density, uniformity, and formation of ZnO.