http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
X. J. Chen,J. C. Xu,H. X. Jin,D. F. Jin,B. Hong,H. L. Ge,X. Q. Wang 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2017 NANO Vol.12 No.5
In this paper, ordered mesoporous SBA-15 silica was synthesized by the hydrothermal method, and then a series of CoFe2O4/SBA-15 nanocomposites were synthesized by a facile impregnation method. X-ray diffraction and N2 adsorption–desorption isotherms were used to characterize the microstructure and morphology of SBA-15 and CoFe2O4/SBA-15 nanocomposites. CoFe2O4 nanoparticles presented spinel phase structure and existed in the mesopores of SBA-15. The magnetic response of CoFe2O4/SBA-15 nanocomposites was characterized with vibrating sample magnetometer (VSM). The adsorption efficiency of CoFe2O4/SBA-15 nanocomposites for methylene blue increased firstly with the increasing CoFe2O4 content, and then decreased. Sample-2 (SBA-15: CoFe2O4 = 1: 0.1 in the precursor) not only presented the best adsorptive performance, but also could be separated and retrieved effectively by magnetic separation technique.
Microwave Absorption and Magnetic Properties of Cobalt Ferrites/Carbon Nanotubes Nanocomposites
B. B. Zhang,P. F. Wang,J. C. Xu,Y. B. Han,H. X. Jin,D. F. Jin,X. L. Peng,B. Hong,J. Li,J. Gong,H. L. Ge,Z. W. Zhu,X. Q. Wang 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2015 NANO Vol.10 No.5
Owing to the unique microstructure and the excellent dielectric properties, carbon nanotubes(CNTs) were decorated with CoFe2O4 nanoparticles to synthesize the CoFe2O4/CNTs nanocomposites by the solvothermal method. The phase structure, morphology, magnetic properties and microwave absorption performance of the as-prepared CoFe2O4/CNTs were characterized and discussed by X-ray diffraction (XRD), thermal gravity analysis (TGA), transmission electron microscope (TEM), vibrating sample magnetometer (VSM) and vector network analyzer (VNA). All results indicated that the diameter of CoFe2O4 nanoparticles decorating on the surface of CNTs increased with the solvothermal temperature. CoFe2O4/CNTs prepared at 180℃, 200℃ and 220℃ exhibited superparamagnetism, while the other samples presented ferromagnetism at room temperature. And with the increasing solvothermal temperature, the saturation magnetization and coercivity increased up to 72 emu/g and 2000 Oe for the sample prepared at 260℃ (S-26). And the reflection loss of CoFe2O4/CNTs nanocomposites increased with the solvothermal temperature up to -15.7 dB for S-26 with the bandwidth of 2.5 GHz.
C. C. Li,K. Li,J. Li,D. L. Mo,R. F. Xu,G. H. Chen,Y. Z. Qiangba,S. L. Ji,X. H. Tang,B. Fan,M. J. Zhu,T. A. Xiong,X. Guan,B. Liu 아세아·태평양축산학회 2006 Animal Bioscience Vol.19 No.2
A 2,656 bp fragment of chicken ghrelin gene was cloned and SNPs were detected by PCR-RFLP and Allele Specific PCR (ASP) in 12 Chinese indigenous chicken breeds and a commercial chicken population. The results showed that there were 23 base variations and an amino acid change (Gln->Arg) in cloned chicken ghrelin gene. Three SNPs were confirmed in 13 populations and associations between this gene and growth traits of Tibetan chicken (TC) and Recessive White chicken (RW) were investigated. The results of haplotype analysis revealed that 26 haplotype genotypes were composed of eight haplotypes. The results of x2 tests indicated that there were significant differences between genotypes or haplotype genotype frequencies in some of the breeds or sexes at 0.05 or 0.01 levels. The results of ANOVA revealed that there were significant differences between genotypes or haplotype genotypes on some growth traits of TC and RW chicken breeds at 0.05 or 0.01 levels. Multiple comparisons showed that there were significant associations between genotype CT at site 71 and some growth traits of two chicken breeds and between genotype AG at site 1,215 and body weight at 16 wk of two chicken breeds, and there was a significant association between haplotype genotype CAA/CAG and body weight and shank girth at 16 wk of two chicken breeds.
Highly stretchable polymer semiconductor films through the nanoconfinement effect
Xu, Jie,Wang, Sihong,Wang, Ging-Ji Nathan,Zhu, Chenxin,Luo, Shaochuan,Jin, Lihua,Gu, Xiaodan,Chen, Shucheng,Feig, Vivian R.,To, John W. F.,Rondeau-Gagnex301,, Simon,Park, Joonsuk,Schroeder, Bob C.,L American Association for the Advancement of Scienc 2017 Science Vol.355 No.6320
<P>Soft and conformable wearable electronics require stretchable semiconductors, but existing ones typically sacrifice charge transport mobility to achieve stretchability. We explore a concept based on the nanoconfinement of polymers to substantially improve the stretchability of polymer semiconductors, without affecting charge transport mobility. The increased polymer chain dynamics under nanoconfinement significantly reduces the modulus of the conjugated polymer and largely delays the onset of crack formation under strain. As a result, our fabricated semiconducting film can be stretched up to 100% strain without affecting mobility, retaining values comparable to that of amorphous silicon. The fully stretchable transistors exhibit high biaxial stretchability with minimal change in on current even when poked with a sharp object. We demonstrate a skinlike finger-wearable driver for a light-emitting diode.</P>
Effect of mineral components on sintering of ash particles at low temperature fouling conditions
Namkung, H.,Xu, L.H.,Kim, C.H.,Yuan, X.,Kang, T.J.,Kim, H.T. Elsevier Scientific Pub. Co 2016 Fuel processing technology Vol.141 No.1
The ash deposition phenomenon in the coal gasification process is a severe problem for continuous operation. The ash deposition rate is influenced by the behavior of ash particles on the deposit target. Dropped coal ash particles, which exhibit different behaviors on the deposit surface such as attachment, rebounding, and removal, were observed through the view port of a drop tube furnace (DTF). The different behaviors may be influenced by the state of the ash particles such as the sintering phenomenon, which is a function of the mineral content. To verify the mineral components important in sintering among the ash particles, transformation of the particle shape of synthetic ash reacted at 900<SUP>o</SUP>C was analyzed through a scanning electron microscope (SEM). The Fe, Ca, and Mg components were the main factors for sintering and agglomeration. The Fe, Ca, and Mg components sintered with Si and Al were observed in the mineral mapping of deposited coal ash by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) analysis. Sintering characteristics of coal ash were analyzed by the dilatometer technique. Sintering temperature, shrinkage, and sintering activation energy (E<SUB>sin</SUB>) were all found to be related to the Fe, Ca, and Mg contents.
Li, C.J.,Xu, Z.H.,Dong, Z.X.,Shi, S.L.,Zhang, J.G. Asian Australasian Association of Animal Productio 2016 Animal Bioscience Vol.29 No.8
Whole-crop wheat (Triticum aestivum L.) as forage has been extensively used in the world. In this study, the effects of N application rates on the yields, nutritive value and silage quality were investigated. The N application rates were 0, 75, 150, 225, and 300 kg/ha. The research results indicated that the dry matter yield of whole-crop wheat increased significantly with increasing N rate up to 150 kg/ha, and then leveled off. The crude protein content and in vitro dry matter digestibility of whole-crop wheat increased significantly with increasing N up to 225 kg/ha, while they no longer increased at N 300 kg/ha. On the contrary, the content of various fibers tended to decrease with the increase of N application. The content of lactic acid, acetic acid and propionic acid in silages increased with the increase of N rate (p<0.05). The ammonia-N content of silages with higher N application rates (${\geq}225kg/ha$) was significantly higher than that with lower N application rates (${\leq}150kg/ha$). Whole-crop wheat applied with high levels of N accumulated more nitrate-N. In conclusion, taking account of yields, nutritive value, silage quality and safety, the optimum N application to whole-crop wheat should be about 150 kg/ha at the present experiment conditions.
Optimal Design for Marker-assisted Gene Pyramiding in Cross Population
Xu, L.Y.,Zhao, F.P.,Sheng, X.H.,Ren, H.X.,Zhang, L.,Wei, C.H.,Du, L.X. Asian Australasian Association of Animal Productio 2012 Animal Bioscience Vol.25 No.6
Marker-assisted gene pyramiding aims to produce individuals with superior economic traits according to the optimal breeding scheme which involves selecting a series of favorite target alleles after cross of base populations and pyramiding them into a single genotype. Inspired by the science of evolutionary computation, we used the metaphor of hill-climbing to model the dynamic behavior of gene pyramiding. In consideration of the traditional cross program of animals along with the features of animal segregating populations, four types of cross programs and two types of selection strategies for gene pyramiding are performed from a practical perspective. Two population cross for pyramiding two genes (denoted II), three population cascading cross for pyramiding three genes(denoted III), four population symmetry (denoted IIII-S) and cascading cross for pyramiding four genes (denoted IIII-C), and various schemes (denoted cross program-A-E) are designed for each cross program given different levels of initial favorite allele frequencies, base population sizes and trait heritabilities. The process of gene pyramiding breeding for various schemes are simulated and compared based on the population hamming distance, average superior genotype frequencies and average phenotypic values. By simulation, the results show that the larger base population size and the higher the initial favorite allele frequency the higher the efficiency of gene pyramiding. Parents cross order is shown to be the most important factor in a cascading cross, but has no significant influence on the symmetric cross. The results also show that genotypic selection strategy is superior to phenotypic selection in accelerating gene pyramiding. Moreover, the method and corresponding software was used to compare different cross schemes and selection strategies.