Importance of sandy bottoms in coral reefs to the oscillation of daily rhythms in the tropical wrasse <i>Halichoeres trimaculatus</i>

Ito-Takeuchi, Hitomi,Takahashi, Kai,Bouchekioua, Selma,Yamauchi, Chihiro,Takeuchi, Yuki,Hur, Sung-Pyo,Lee, Young-Don,Takemura, Akihiro Informa UK (TaylorFrancis) 2017 Chronobiology international Vol.34 No.8

<P>Most wrasse species swim during the day and bury themselves in the sandy bottoms of shallow reefs at night. This study aimed to evaluate the importance of sandy bottoms to the day-active/ night-inactive rhythmicity of the tropical wrasse Halichoeres trimaculatus. Actogram analysis revealed that fish were active during the photophase and inactive during the scotophase in aquariums with both sandy and bare bottoms. When fish were kept in aquariums with bare bottoms, rhythmicity was maintained under constant dark conditions (DD) but became obscured under constant light conditions (LL), suggesting that a day-active/night-inactive rhythmicity is regulated by the circadian system. Robust fluctuations in Period1 (wPer1) and Period2 (wPer2) expression were observed in the pectoral fin tissue under light-dark conditions (LD). Similar fluctuations in wPer1 expression persisted under DD. When fish were kept under LD conditions for 7 days and then DD for 20 days, the emergence of fish from the sandy bottom was delayed gradually. At the same time, the peak time of wPer1 expression under DD was retarded from 06: 00 to 10:00. Although wPer2 expression was dampened under DD, it increased after exposing fish to light. These results suggest that wPer1 and wPer2 are differentially involved in the day-active/ night-inactive rhythmicity, and that blocking light with a sandy bed at night and exposing fish to light during emergence in the morning play important roles in maintaining consistent activities in wrasse species.</P>

Studies of Stimulation of Early Growth of Rice Seedlings and Effects of Rice Seeds and Seedlings on Seasonal Variations in Emergence and Growth of Monochoria vaginalis in Direct-sowing Cultivation

Takeuchi, Yasutomo The Korean Society of Weed Science The Turfgrass S 1996 Weed&Turfgrass Science Vol.16 No.4

New Roles of Regional Geography in Japan

Takeuchi, Keiichi 誠信女子大學校 韓國地理硏究所 1997 應用地理 Vol.- No.20

IgG4-Related Intracranial Hypertrophic Pachymeningitis : A Case Report and Review of the Literature

Takeuchi, Satoru,Osada, Hideo,Seno, Soichiro,Nawashiro, Hiroshi The Korean Neurosurgical Society 2014 Journal of Korean neurosurgical society Vol.55 No.5

Hypertrophic pachymeningitis is an uncommon disorder that causes a localized or diffuse thickening of the dura mater. Recently, the possibility that IgG4-related sclerosing disease may underlie some cases of intracranial hypertrophic pachymeningitis has been suggested. We herein report the tenth case of IgG4-related intracranial hypertrophic pachymeningitis and review the previous literature. A 45-year-old male presented with left-sided focal seizures with generalization. Magnetic resonance imaging (MRI) revealed a diffuse thickening and enhancement of the right convexity dura matter and falx with focal nodularity. The surgically resected specimens exhibited the proliferation of fibroblast-like spindle cells and an infiltration of mononuclear cells, including predominantly plasma cells. The ratio of IgG4-positive plasma cells to the overall IgG-positive cells was 45% in the area containing the highest infiltration of plasma cells. On the basis of the above findings, IgG4-related sclerosing disease arising from the dura mater was suspected. IgG4-related sclerosing disease should be added to the pachymeningitis spectrum.

일본의 중소기업을 위한 산업보건사업

Takeuchi, Yasuhiro 대한산업보건협회 1994 산업보건 Vol.75 No.-

Rate-Dependence of Off-Axis Tensile Behavior of Cross-Ply CFRP Laminates at Elevated Temperature and Its Simulation

Takeuchi, Fumi,Kawai, Masamichi,Zhang, Jian-Qi,Matsuda, Tetsuya The Korean Society for Composite Materials 2008 Advanced composite materials Vol.17 No.1

The present paper focuses on experimental verification of the ply-by-ply basis inelastic analysis of multidirectional laminates. First of all, rate dependence of the tensile behavior of balanced symmetric cross-ply T800H/epoxy laminates with a $[0/90]_{3S}$ lay-up under off-axis loading conditions at $100^{\circ}C$ is examined. Uniaxial tension tests are performed on plain coupon specimens with various fiber orientations $[{\theta}/(90-{\theta})]_{3S}$ ($\theta$ = 0, 5, 15, 45 and $90^{\circ}C$) at two different strain rates (1.0 and 0.01%/min). The off-axis stress.strain curves exhibit marked nonlinearity for all the off-axis fiber orientations except for the on-axis fiber orientations $\theta$ = 0 and $90^{\circ}$, regardless of the strain rates. Strain rate has significant influences not only on the off-axis flow stress in the regime of nonlinear response but also on the apparent off-axis elastic modulus in the regime of initial linear response. A macromechanical constitutive model based on a ply viscoplasticity model and the classical laminated plate theory is applied to predictions of the rate-dependent off-axis nonlinear behavior of the cross-ply CFRP laminate. The material constants involved by the ply viscoplasticity model are identified on the basis of the experimental results on the unidirectional laminate of the same carbon/epoxy system. It is demonstrated that good agreements between the predicted and observed results are obtained by taking account of the fiber rotation induced by deformation as well as the rate dependence of the initial Young's moduli.

住民主体による観光地化に向けた地域資源開発に関する実践的研究‐北九州市小倉北区藍島を事例として‐

Takeuchi Yuji 동북아관광학회 2011 동북아관광연구 Vol.6 No.1

The phrase, ‘citizen participation in community developments’ has been used increasingly in recent years. However, the concept is rarely achieved in real world planning. In order to find out why it is so difficult to make citizen participation work, the author carried out an experimental workshop project where local residents participated voluntarily in formulating an action plan for the improvement of their neighborhood, in the isolated island “Aishima” of the City of Kitakyushu. Our experience shows that the residents are willing to participate when they are given, and are aware of, the actual means to do so. We need to keep a citizen network to raise the awareness of the residents about their own neighborhood, so that they can think and act for themselves in improving their community. This paper examines the author’s experimental workshop and experimental action. 近年、「地域開発における住民参加」いうことをしばしば聞くようになった。しかしながら、この概念は実際の作業現場において、ほとんど機能していない。そこで、なぜ住民参加による作業が難しいのかについて、北九州市の離島・藍島での地域活性化のためにアクションプランを構築し、筆者が地域住民のためのワークショップの実施を試みる。これらの取組みを通じて、地域住民にこれらの活動に参加することの意義やその機会を与えたい。その成果として、住民自身が自分たち自身で活動することのできるコミュニティに対する考え方と動きを保持し、地域が向上していける市民ネットワークが必要であることがわかった。本報告は、これらの活動を実践し、その成果をまとめたものである。

Periodontal wound healing following reciprocal autologous root transplantation in class III furcation defects

Takeuchi, Naoshi,Shirakata, Yoshinori,Shinohara, Yukiya,Sena, Kotaro,Noguchi, Kazuyuki Korean Academy of Periodontology 2017 Journal of Periodontal & Implant Science Vol.47 No.6

Purpose: Furcation involvement in the molars is difficult to treat, and has been recognized as a risk factor for tooth loss. Although periodontal regenerative therapies, including guided tissue regeneration and various types of bone grafts, have been applied to furcation defects, the effects of these treatments are limited, especially in large class III furcation defects. The purpose of this pilot study was to investigate the effect of reciprocal autologous root transplantation on periodontal wound healing and regeneration in class III furcation defects in dogs. Methods: Furcation defects (7 mm wide and 6 mm high) were surgically created after root separation of the unilateral third and fourth premolars in 4 dogs. Eight furcation defects were randomized to receive either reciprocal autologous root transplantation (test) or no further treatment (control). In the test group, the mesial and distal roots were transplanted into the distal and mesial extraction sockets, respectively. The animals were sacrificed 10 weeks after surgery for histologic evaluation. Results: The healing pattern in the control group was characterized by extensive collapse of the flap and limited periodontal regeneration. New bone formation in the test group ($3.56{\pm}0.57mm$) was significantly greater than in the control group ($0.62{\pm}0.21mm$). Dense collagen fibers inserting into the residual cementum on the transplanted root surfaces were observed in the test group. Slight ankylosis was observed in 2 of the 4 specimens in the test group on the mesiodistal sides where the root-planed surfaces faced the existing bone. Root resorption (RR) was detected in both the control and test groups. Conclusions: Within the limits of this study, it can be concluded that reciprocal autologous root transplantation was effective for bone regeneration in class III furcation defects in dogs. However, further studies are required to standardize the approach in order to prevent unwanted RR prior to clinical application.

Sketch-based Solid Prototype Modeling System with Dual Data Structure of Point-set Surfaces and Voxels

Takeuchi, Ryota,Watanabe, Taichi,Yamakawa, Soji Society for Computational Design and Engineering 2011 International Journal of CAD/CAM Vol.11 No.1

This paper proposes a new solid-shape modeling system based on a lusterware-image illustration. The proposed method reconstructs a three dimensional solid shape from a set of rough sketches that are typically drawn in the early stages of the design process. The sketches do not have to be strictly accurate, and this tolerance to the roughness of the input sketches is one of the major advantages of the proposed method. The proposed system creates an initial shape based on the silhouette of the input lusterware-images. Then the user can edit the initial shape with intuitive cutting and dishing-up operations, which are based on sketching user interface. To achieve the goal, the system retains the geometric model with two representations: a point-set data and a volume data. This dual data structure allows the program to create an initial shape from the input images with little computational cost, and the user can apply cutting and dishing-up operations without substantially increasing computational and memory requirements. In this research, we have tested the proposed system by reconstructing solid models of some mechanical parts from rough sketches. The experimental results indicate that the proposed method is useful for the prototyping of a solid shape.

Correction to: Functionalized microneedles for continuous glucose monitoring

Takeuchi Kai,Kim Beomjoon 나노기술연구협의회 2018 Nano Convergence Vol.5 No.36

After publication of this article [1], the author noticed there are some conversion errors with the below characters and units in the article body text. The corrections are detailed below: 1) ‘pTAS’ should be ‘µTAS’ 2) ‘pm’ should be ‘µm’ We apologize for the inconvenience caused.