http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정종현,백승남,노학,고영무 대한치과기재학회 1998 대한치과재료학회지 Vol.25 No.1
While titanium and its alloys has been well studied for a long time, new interest in these materials and their properties has arisen in recent years with respect to their application as biomedical metallic materials. For practical purposes, the following performances are essential for biomaterials. (1) low specific gravity (2) high corrosion resistance (3) good biostability and biocompatibility (4) sufficient mechanical properties (5) non-toxicity To develop biomedical implant materials having all the properties mentioned above, new titanium-zirconium alloys were prepared in this study. Mechanical properties and corrosion resistance were then investigated for as-cast and as-homogeneized Ti₁_x-Zrx alloys in order to reveal their possible use for biomaterials. From the experiments, the following results are obtained: 1. No martensite structure are observed in the specimens made of pure Ti and Zr. In contrast them, Ti-Zr alloys containing 18wt%Zr, 24wt%Zr and 48wt%Zr show a kind of martensite structure regardless heat treatment. 2. Fineness of structures for as-cast-alloys seems to vary with alloy composition. Ti-Zr alloy containing 48wt%Zr shows the finest microstructure. 3. Hardness of Ti-Zr alloys shows continuous change through the system and the alloys containing 48 to 60wt%Zr indicate higher hardness compared with those of pure Ti and other alloys. It is well known that hardness is usually changed with substitutional atoms, and effect of solute atom on hardness is greatest with an equi-atomic composition. The greatest hardness which was obtained in Ti-Zr alloys containing 48 to 60wt%Zr is therefore reasonable. Also, enhanced hardness can be explained on elastic interaction between dislocation and substitutional solute atoms in crystal structure and on fineness of structure. 4. Pure Ti and Zr alloys containing 6wt%Zr, 12wt%Zr, 18wt%Zr, 36wt%Zr show better corrosion resistance compared with those of pure Zr, stainless steel(SUS 316L) and the Ti-Zr alloy containing 48wt%Zr. 5. Comparing hardness, microstructure and corrosion of Ti₁_x-Zrx alloys, no large differences between as-cast and as-homogenized alloys are seen.
VoIP 망에서 SIP 취약점을 이용한 위협의 분석과 대응
김무성 ( Mu-sung Kim ),문길종 ( Gil-jong Mun ),양승호 ( Seung Ho Yang ),노봉남 ( Bong-nam Noh ),김용민 ( Yong-min Kim ) 한국정보처리학회 2010 한국정보처리학회 학술대회논문집 Vol.17 No.2
VoIP를 위한 개방형 규약 중 SIP는 IETF에서 정의한 시그널링 규약으로 IP 네트워크에서 음성, 영상의 호와 같은 멀티미디어 통신 세션을 제어하기 위해 널리 사용한다. 공격자는 SIP의 취약점을 이용한 전화번호 스캐닝, 사용자 암호를 알아내기 위한 사전공격, 콜 플러딩 공격을 통해 VoIP 서비스 정보를 절취하거나 이용을 방해 할 수 있다. 본 논문에서는 VoIP 환경의 SIP 스캐닝, 콜 플러딩, 그리고 무차별 대입 공격을 분석하고 대응방안을 제시한다.
복부 CT 영상에서 메쉬 필터를 이용한 간과 비장의 추출에 대한 연구
유승화(Seung-Wha Yoo),성윤창(Yun-Chang Sung),유현경(Hyun-kynug Yoo),김재평(Jae-Pyung Kim),조준식(June-Sik Cho),노승무(Seung-Mu Noh),신경숙(Kyong Suk Shin),박종원(Jong-Won Park) 한국정보과학회 1999 한국정보과학회 학술발표논문집 Vol.26 No.1B
본 논문에서는 복부 방사선 CT 영상에서 간과 비장의 추출 및 추출된 장기의 체적을 구하는 방법에 대하여 연구하였다. 이를 위하여 각 장기를 구성하는 픽셀의 명암 값에 대한 정보 및 위치에 대한 정보를 이용함에 있어서 각 CT 영상에서 간과 비장의 명암 값을 자동적으로 추정하기 위해 메쉬 필터를 이용하였으며 또한 위치 탐색선을 이용하여 분리된 장기를 정확하게 검출할 수 있도록 구현하였다. 한편 트리밍 과정으로 추출된 장기의 정확성을 향상시킬 수 있도록 하는 방법과 산출된 체적의 오차감소를 위한 방법에 대해서도 연구하였다.
Kim, Su-Hyeon,Lee, Cheol-Ho,Yun, Jin-Mun,Noh, Yong-Jin,Kim, Seok-Soon,Lee, Sungho,Jo, Seung Mu,Joh, Han-Ik,Na, Seok-In RSC Pub 2014 Nanoscale Vol.6 No.13
<P>A one-step reduction and functionalization of graphene oxide (FrGO) was easily achieved using a novel phenylhydrazine-based reductant containing fluorine atoms, which can induce p-type doping due to its high electronegativity. The FrGO-based OPV exhibited a high power conversion efficiency of 6.71% and a superior OPV-stability to commercial PEDOT:PSS.</P>