A Study on Heat Transfer of Paulownia coreana and High-Density Fiberboard via Comparative Analysis

Kang, Seog-Goo,Lee, Sol-Ae,Son, Dong-Won,Kang, Chun-Won,Matsumura, Junji FACULTY OF AGRIC PUBLICATIONS-KYUSHU UNIV 2015 Journal of the Faculty of Agriculture, Kyushu Univ Vol. No.

녹차잎분말을 이용한 마루판의 유해 TVOC 제거효과

강석구 ( Seog Goo Kang ),이화형 ( Hwa Hyoung Lee ) 한국목재공학회 2008 목재공학 Vol.36 No.6

혈장변성접착제를 사용한 내수합판의 특성

강석구 ( Seog Goo Kang ),이화형 ( Hwa Hyoung Lee ) 한국목재공학회 2011 목재공학 Vol.39 No.1

This study was carried out to examine properties of water resistant plywood by using serum protein adhesive which is natural environment-friendly and human-friendly. For the preparation of the serum protein adhesive, pig blood from slaughterhouse was centrifuged and serum was separated from corpuscles and concentrated to 30% by dry weight basis This concentrated serum protein was modified with PF resin(50% NVC) with the ratio of 9:2.5. Plywood made by this modified serum protein gave 1.21 N/mm2 of dry bonding strength, 0.80N/mm2 of wet boil bonding strength, 0% of cyclic delamination test value, and 0.025ppm of HCHO emission, which met the excellent super Eo grade and water resistant plywood.

왕대의 3방향에 따른 초음파적 특성

강석구 ( Seog Goo Kang ),이화형 ( Hwa Hyoung Lee ) 한국목재공학회 2011 목재공학 Vol.39 No.1

This research was carried out to examine the ultrasonic properties of Phyllostachys bambusoids Sieb et Zucc depending on three directions for providing the fundamental properties of the Korea traditional flute, Daekeum. The ultrasonic properties of Phyllostachys bambusoides Sieb. et Zucc were found to be different from those of wood, because of the distinctive anatomical structure of bamboo tissue. The ultrasonic velocity of peripheral zone showed higher values of all three directions. The ratio of longitudinal velocities to perpendicular velocities showed 116 at peripheral zone, 170 at central zone, 1.38 at inner zone respectively. The ratio of radial velocities to tangential velocities were measured as 1.286 at peripheral zone, 1325 at central zone, 0.829 at inner zone respectively.

Sound Absorption Rate and Sound Transmission Loss of Wood Bark Particle (목재수피 파티클의 흡음율과 음향투과손실)

( Chun-Won Kang ),( Eun-Suk Jang ),( Sang-Sik Jang ),( Ho-Yang Kang ),( Seog-Goo Kang ),( Se-Chang Oh ) 한국목재공학회 2019 목재공학 Vol.47 No.4

In this study, sound absorption capability and sound transmission loss of several kinds of target densities and thickness for six species of wood bark particle were estimated by the transfer function and transfer matrix methods. Resultantly, the mean sound absorption coefficient of a 100-mm thick Hinoki wood bark particle mat was 0.90 in the frequency range of 100-6400 Hz, whereas the mean sound absorption rate of a 50-mm thick Hinoki wood bark particle mat was 0.84 in the same frequency range. Particularly, at a thickness of 100 mm, it reached almost up to 100% in the frequency range of 1 KHz. The sound transmission losses of 100-mm thick Hinoki wood bark particle mat with a target density of 0.16 at 500 and 1000 Hz were 15.30 and 15.73 dB, respectively. When a 10-mm thick plywood was attached to the back of the wood particle mat, the sound transmission losses was increased by 20-30 dB. Wood bark can be used as an acoustical material owing to its high sound absorption rate and transmission loss.

분말상 탄닌수지를 이용한 파티클보드의 제조기술 및 물성개선

강석구,이화형 한국목재공학회 2004 목재공학 Vol.32 No.1

천연접착제인 분말상 탄닌수지를 사용한 파티클보드의 물리·기계적 성질의 개선을 위하여 분말상 탄닌수지와 액상 탄닌수지를 혼합하여 사용한 결과, 30:70 (분말 : 액상)의 혼합비가 최적조건이었으며 분말상 탄닌 수지의 비율이 높으면 물성이 저하되는 현상을 볼 수 있었으며 또한 포름알데히드 방산량이 E0 수준의 고내수성 제품을 제조할 수 있었다. 한편 요소수지 및 멜라민수지와 분말상 탄닌 수지와의 혼합방법은 물리·기계적 성질의 개선에 영향을 주지 못했으며, 유리포름알데히드 방산에 대한 scavenger의 역할만을 하였다. This study was carried out to improve the properties of powdered tannin adhesive(PT) by adding liquid tannin resin(LT) to PT in the manufacture of particleboard. Mixing the LT to PT from 50% to 100% by weight did not show any difference in particleboard properties, but the higher the powdered tannin resin ratio, the lower the properties of the board. The proper ratio of PT to LT was 30:70 for the improvement of PT-particleboard, unless LT lower than 70%. Internal bonding strength was in proportional to the amount of LT. Mixing amino adhesives and PT did not show any improvements in mechanical and physical properties of the board but they only acted as scavenger for the free formaldehyde. Manufacturing particle board with the adhesive of 30:70 (PT:LT) and by using double blender resulted in high-performance products of Eh level of formaldehyde emission with high water resistance (U type; below 12%, M type; below 25%), as well as saving chip drying energy.

직교 주파수분할다중화에서 첨두전력 대 평균전력비 감소를 위한 체계적인 부호설계

강석근(Seog Geun Kang),김정구(Jeong Goo Kim) 한국방송·미디어공학회 2006 방송공학회논문지 Vol.11 No.3

Design criteria for a block code which guarantees minimized PAPR of the OFDM signals are proposed in this paper. Encoding procedure of the minimum PAPR codes (MPC) is composed of searching a seed codeword, circular shifting the register elements, and determining codeword inversion. It is shown that the PEP is invariant to the circular shift of register elements and codeword inversion. Based on such properties, systematic encoding rule for MPC is proposed. In addition proposed encoding rule can reduced greatly the size of look up table for MPC.

Identification of occult tumors by whole-specimen mapping in solitary papillary thyroid carcinoma

Park, Seog Yun,Jung, Yuh-S,Ryu, Chang Hwan,Lee, Chang Yoon,Lee, You Jin,Lee, Eun Kyung,Kim, Seok-Ki,Kim, Tae Sung,Kim, Tae Hyun,Jang, Jeyun,Park, Daeyoon,Dong, Seung Myung,Kang, Jae-Goo,Lee, Jin Soo,R Society for Endocrinology 2015 Endocrine-related cancer Vol.22 No.4

<P>We undertook this study to estimate an accurate incidence and spread patterns of occult papillary thyroid carcinoma (PTC) in patients with a preoperative diagnosis of solitary PTC by using whole-specimen mapping of all specimens after a total thyroidectomy. Enrolled prospectively in this whole-thyroid mapping study are 82 consecutive patients who underwent a total thyroidectomy under a preoperative diagnosis of solitary PTC. All thyroidectomy specimens were serially sectioned in 2 mm thickness and whole-thyroid mapping was carried out for additional foci of occult PTC. The frequencies of occult lesions detected in the whole and contralateral lobe were determined, and clinicopathologic factors associated with multifocality were assessed. Whole-thyroid mapping revealed 66 occult PTC lesions missed by preoperative ultrasound in 37 (45.1%) of the 82 patients. The great majority (92.5%) of the occult PTC was smaller than 3 mm in size and 25 patients (30.5%) had contralateral lesions. We found that the male sex was an independent predictor of multifocality (odds ratio (OR), 3.00; 95% CI, 1.11–8.14), adjusting for preoperative findings. Analysis with pathologic parameters showed that the male sex (OR, 5.03; 95% CI, 1.68–15.08) and extrathyroidal extensions (OR, 3.03; 95% CI, 1.03–8.95) were associated with multifocal PTC. However, none of the clinicopathologic factors evaluated predicted contralateral PTC. Our study demonstrates the diagnostic limitations of ultrasound for the detection of multifocal PTC and the need to consider the possibility of occult lesions in the management of solitary PTC, especially in male patients.</P>

Development and Assessment of Harmful Gases Reducing Molded Fuel Using Torrefied Wood(반탄화목재를 이용한 유해가스 저감형 성형연료의 개발 및 평가)

( Chang-goo Lee ),( Chang-deuk Eom ),( Min-ji Kim ),( Seog-goo Kang ) 한국목재공학회 2020 목재공학 Vol.48 No.5

본 연구에서는 졸참나무를 반탄화 처리 후 성형숯 형태로 제작하여 물성과 연료특성 및 연소과정에서 발생되는 유해가스 정량분석을 수행하였다. 또한, 대조군으로 시중에서 유통 중인 구이용 성형숯을 선정하여 비교분석하였다. 그 결과, 반탄화 시험편의 고위발열량은 구이용 성형숯 보다 약 14% 높았으며, 회분함량은 약 51배 낮았다. 또한, 밀폐된 챔버에서 각각의 시험편을 900 s간 연소시켰을 때 발생되는 유해가스(일산화탄소, 질산화합물, 이산화황)를 정량평가한 결과, 반탄화 시험편에서 발생한 일산화탄소의 발생량의 최대값이 기존 성형숯보다 약 50배 낮은 것으로 확인되었다. 따라서, 본 연구에서 제작한 반탄화 시험편이 시중 성형숯보다 고위발열량이 높고 연소과정에서 일산화탄소 발생량이 현저히 적은 것으로 나타났다. In this study, a torrefaction of Quercus serrata to manufacture a molded charcoal was performed, investigated material properties, fuel characteristics, and performed a quantitative analysis of hazardous gases which occur during a combustion process. In addition, a molded charcoal in market was selected as a control group, and a comparative analysis was performed. As a result, the higher heating value (HHV) of the torrefied specimen was about 14% higher than that of molded charcoal, and its ash content was about 51 times lower. Moreover, after performing a quantitative assessment of hazardous gases (carbon monoxide, nitrogen oxide, and sulfur dioxide) which were produced when each specimen was combusted for 900 seconds in an enclosed chamber, it was confirmed that the maximum value of generated amount of carbon monoxide on the torrefied specimen was about 50 times lower than that of the existing molded charcoal. Therefore, it was shown that the torrefied specimen produced in this study had a higher heating value than the molded charcoal in the market, and a very low amount of carbon monoxide generated during the combustion process.

반탄화 목분과 폐활성탄 혼합물의 복합연료활용을 위한 연료적 특성에 관한 연구

이창구 ( Chang Goo Lee ),강석구 ( Seog Goo Kang ) 한국목재공학회 2015 목재공학 Vol.43 No.1

본 연구는 반탄화 목분과 정수기 필터용 폐활성탄 분쇄물을 혼합한 혼합물을 연료로 사용하였을 경우의 그 연료적 특성을 평가하고자 하였다. 반탄화 목분은 국산 범용수종인 졸참나무와 소나무를 이용하여 급속으로 목재칩 열가공처리가 가능한 wood roaster를 이용하여 처리하였으며 처리조건은 200℃에서 각 300 s, 450 s, 600 s를 적용하였다. 이때 폐활성탄과 반탄화 목분의 혼합비율은 중량대비(wt%) 5 : 95, 10 : 90, 15 : 85, 20 : 80, 40 : 60, 60 : 40, 80 : 20으로 하였으며, 이에 대한 연료적 특성에 평가를 위해 발열량, 원소분석, 회분함량 등을 측정하였다. 그 결과는 다음과 같다. 1. 동일시간, 온도 등의 wood roasting 처리조건에서 소나무가 졸참나무에 비해 탄소함량이 더 높았으며, 이는 낮은온도와 짧은 시간에 최적 탄화도를 나타냄으로 소나무가 효율적인 반탄화 작업이 가능함을 알 수 있다. 2. 반탄화 목분 및 무처리 목분의 폐활성탄 첨가율이 증가할수록 총발열량 값은 급격히 증가하였고 회분함량 또한 증가하였다. 3. 반탄화 목분과 무처리 목분에 폐활성탄을 혼합한 경우에는 두 조건 모두 첨가율에 따라 총발열량은 증가하지만 무처리 보다는 반탄화 목분 그리고 졸참나무보다는 소나무가 더 높은 총발열량을 나타냈다. 4. 폐활성탄을 목분과 함께 혼합물의 원료로 사용하기 위해서는 800℃, 4시간 연소조건 이상의 고온 연소조건이 필요하다고 판단된다. 이는 800℃, 4시간 연소조건에서도 완전연소가 되지 않고 회분상태로 잔류하는 함량이 매우 높기 때문이다. 5. 또한 무처리 목분과 반탄화 목분에 폐활성탄을 혼합한 조건 중 무처리 목분에 폐활성탄을 혼합하는 조건이 총발열량의 증가율이 더 높게 나타났으며, 이러한 현상은 소나무보다는 졸참나무가 더 명확하게 나타났다. 최적 회분함량의 폐활성탄 첨가비율은 소나무 무처리 목분에 총 중량대비 5% 이상, 10% 미만의 조건이며 이는 1급 펠릿에 해당되는 0.7% 미만의 기준을 만족하는 것으로 나타났다. This study evaluated fuel properties of composite materials which were prepared by mixing a waste activated carbon from the used purifier filter with torrefied wood powder. Wood species of the raw material of torrefied wood powder are oak wood (Quercus serrata Thunb. ex Murray) and pine wood (Pinus densiflora Siebold & Zucc). And the treatment conditions used for this study were 300 s, 450 s, and 600 s at 200℃ for the wood roaster. Also, the mixing ratios are 5 : 95, 10 : 90, 15 : 85, 20 : 80, 40 : 60, 60 : 40 and 80 : 20 (waste activated carbon : torrefied wood powder). The fuel properties such as highly heating value (HHV), elementary analysis and ash content were evaluated. The results obtained are followings; 1. Despite the same treatment condition of wood roasting, pine wood has higher carbon contents than oak wood. Therefore, pine wood indicated the optimum carbonization at low temperature and short treatment times. 2. The gross calorific value and ash content increased as the mixing ratio of waste activated carbon increased. 3. Mixtures of the waste activated carbon and torrefied wood powder showed greater gross calorific value than those of the mixtures of waste activated carbon and the untreated wood powder. Also, the pine wood resulted in higher heating value that thaose of the oak wood. 4. When composite fuels that were composed waste activate carbon and wood powder are used, higher temperature conditions are required because the combustion is incomplete at 800℃ and 4 hours. 5. The increasing rate of the gross calorific value of mixtures of waste activated carbon and untreated wood powder is higher than does the mixtures of waste activated carbon and torrefied wood powder. Also, this phenomenon is more obvious for pine woods. Therefore, an optimal mixing ratio of waste activated carbon was determined to be between 5% and 10% (wt%). Also, this condition satisfied the requirement of the No.1 grade of wood pellet.