http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송평섭,강용,우광재,정의영 忠南大學校 産業技術硏究所 1996 산업기술연구논문집 Vol.11 No.2
Hydrodynamic characteristics of gas-solid flow has been analyzed by adopting the static pressure drop method in circulating fluidized beds. Pressure drop has been measured in the test section of the riser(0.1m IDx3.5m Height). The dried and filtered air was injected into the column through the perforated type distributor. Polyetylene powder whose density is 920 kg/㎥ and mean diameter is 454 ㎛ was used as a solid phase. The pressure drop slightly increased in the turbulent fluidized regime and rapidly decreased because of decreasing of solid hold-up in the fast fluidization regime with increasing superficial gas velocity. The slip velocity that is relative velocity between gas and solid velocity increased in the turbulent fluidized regime and decreased in the fast fluidized regime with increasing the superficial gas velocity.
강태규,송평섭,최길수,조용준,강용,최호석,김상돈 한국화학공학회 2002 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.40 No.5
직경이 0.102m이고 높이가 1.0m인 기체-액체 순환 및 삼상 순환유동층 생물반응기의 상승관에서 열전달 특성을 고찰하였다. 기체 및 액체의 유속 그리고 생물막 담체의 체류량이 상승관 내부의 수직 열원과 반응기 사이의 열전달 계수에 미치는 영향을 결정하였다. 기체-액체 순환 반응기에서 열전달 계수는 기체의 유속이 증가함에 따라 증가하였으나 액체 유속의 증가에 따라서는 약간 증가하였다. 삼상 순환유동층 생물반응기에서 열전달 계수는 기체의 유속과 유동 생물막 매체의 체류량이 증가함에 따라 증가하였으나 액체의 유속이 증가함에 따라서는 약간 증가하였다. 본 연구의 실험 범위에서 이들 열전달 계수는 실험 조작 변수의 상관식으로 잘 나타낼 수 있었다. Heat transfer characteristics have been investigated in the riser of gas-liquid circulation and three-phase circulating fluidized-bed bioreactors whose diameter and height are 0.102m and 1.0m, respectively. Effects of gas and liquid velocities and holdup of fluidized biofilm media on the heat transfer coefficient between the immersed vertical heater and the bed have been determined. The heat transfer coefficient in the gas-liquid circulation reactor increases with increasing gas velocity, but increases only slightly with increasing liquid velocity. The h(heat transfer coefficient) value in the three-phase circulating fluidized-bed bioreactor also increases with increasing gas velocity or holdup of fluidized biofilm media, but it increases only slightly with liquid velocity. The value of heat transfer coefficient has been well correlated in terms of operating variables.
액체-고체 순환유동층의 상승관에서 액상의 점도가 고체체류량 및 열전달계수에 미치는 영향
이찬기,강석환,신광식,송평섭,강용,김상돈 한국화학공학회 2003 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.41 No.4
직경이 0.102 m이고 높이가 3.5 m인 액체-고체 순환유동층에서 액체의 점도가 고체입자의 체류량과 열전달계수에 미치는 영향을 검토하였다. 밀도가 2,500 kg/㎥인 유리구슬(d_(p)=1.0, 1.7, 2.1 또는 3.0 mm)과 CMC 용액(μ_(L)=0.96-38 mPas)을 각각 고체상과 액체상으로 사용하였다. 액체-고체 순환유동층에서 고체입자의 체류량은 액체의 유속이나 점도가 증가함에 따라 감소하였고 유동입자의 크기나 입자의 순환속도가 증가함에 따라 증가하였다. 액체-고체 순환유동층에서 열전달계수는 액체의 점도가 증가함에 따라 감소하였고 유동입자의 크기나 순환속도가 증가함에 따라 증가하였으나, 액체의 유속이 증가함에 따라서는 큰 변화가 없었다. 액체-고체 순환유동층에서 고체입자의 체류량과 열전달계수는 다음과 같이 실험변수와 무차원군에 의해 상관식으로 얻을 수 있었다. E_(S) = 0.783U^(-0.100)_(L)G^(0.164)_(S)d^(0.302)_(p)μ^(-0.036)_(L) h = 4349.3U^(0.010)_(L)G^(0.099)_(S)d^(0.151)_(p)μ^(-0.015)_(L) ◁그림삽입▷ Effects of liquid viscosity on the solid holdup and heat transfer coefficient have been investigated in the riser of a liquid-solid circulating fluidized beds, whose diameter is 0.102 m and 3.5 m in height. Glass beads (d_(p)=1.0, 1.7, 2.1 or 3.0 ㎜) whose density is 2,500 ㎏/㎥ and aqueous solutions of carboxymethy cellulose (CMC)(μ_(L)=0.96-38 mPas) have been used as the solid and liquid phase, respectively. It has been found that the solid holdup decreases with increasing liquid velocity or viscosity, but it increases with increasing solid particle size or solid circulation rate. The heat transfer coefficient decreases with increasing liquid viscosity but it increases with increasing particle size or solid circulation rate, however, it does not change considerablely with increasing liquid velocity. The solid holdup and heat transfer coefficient have been well correlated in terms of operating variables or dimensionless groups as fellow: ◁수식원문참조▷
Characteristics of the Decontamination by the Melting of Aluminum Waste
Pyung-Seob Song,Wang-Kyu Choi,Byung-Youn Min,Hak-I Kim,Chong-Hun Jung,Won-Zin Oh 한국방사성폐기물학회 2005 방사성폐기물학회지 Vol.3 No.2
TRIGA 연구로의 해체 시 발생하는 금속성 폐기물의 용융기술을 확립하기 위한 기초연구로 전기로 내에서 방사성 핵종(Co, Cs, Sr)을 포함한 알루미늄의 용융 시 용융온도, 용융시간 및 플럭스(flux)의 종류가 핵종의 분배 거동에 미치는 영향을 조사하였다. 플럭스의 종류에 따라 다소 차이는 있으나, 플럭스의 첨가로 알루미늄 용융체의 유동성이 증가됨을 확인할 수 있었다 용융 후주괴(ingot) 및 슬래그(slag) 시료의 XRD분석을 통해 핵종이 주괴에서 슬래그 상으로 이동하고 슬래그를 구성하고 있는 산화알루미늄과 결합하여 안정한 화합물을 형성함을 알 수 있었다. 슬래그의 발생량은 용융온도와 용융시간이 증가할수록 증가하는 경향을 보였으며, 증가속도는 플럭스의 종류에 따라 차이를 보였다. 핵종 중 Co는 용융온도가 증가함에 따라 주괴 내 에서는 감소하였으나 슬래그 상에서는 증가하는 경향을 보였으며, 실험조건에 따라 최대 90까지 주괴에서 슬래그로 이동하였다. 휘발성이 강한 Cs과 Sr은 대부분이 슬래그와 분진으로 이동하여 매우 높은 제염계수를 얻을 수 있었다. Effects of the aluminum melting temperature, melting time and a kind of flux agents on the distribution of surrogate nuclide were investigated in the electric furnace at the aluminum melting including surrogate radionuclides(Co, Cs, Sr) in order to establish the fundamental research of the melting technology for the metallic wastes from the decommissioning of the TRIGA research reactor. It was verified that the fluidity of aluminum melt was increased by adding flux agent but it was slightly varied according to the sort of flux agents. The results of the XRD analysis showed that the surrogate nuclides move into the slag phase and then they were combined with aluminum oxide to form more stable compound. The weight of the slag generated from aluminum melting test increased with increasing melting temperature and melting time and the increase rate of the slag depended on the kind of flux agents added in the aluminum waste. The concentration of the cobalt in the ingot phase decreased with increasing reaction temperature but it increased in the slag phase up to 90according to the experimental conditions. The volatile nuclides such as Cs and Sr considerably transferred from the ingot phase to the slag and dust phase.