Design-Oriented Stability of Outer Voltage Loop in Capacitor Current Controlled Buck Converters

Zhang, Xi,Zhang, Zhongwei,Bao, Bocheng,Bao, Han,Wu, Zhimin,Yao, Kaiwen,Wu, Jing The Korean Institute of Power Electronics 2019 JOURNAL OF POWER ELECTRONICS Vol.19 No.4

Due to the inherent feedforward of load current, capacitor current (CC) control shows a fast transient response that makes it suitable for the power supplies used in various portable electronic devices. However, considering the effect of the outer voltage loop, the stable range of the duty-cycle is significantly diminished in CC controlled buck converters. To investigate the stability effect of the outer voltage loop on buck converters, a CC controlled buck converter with a proportion-integral (PI) compensator is taken as an example, and its second-order discrete-time model is established. Based on this model, the instability caused by the duty-cycle is discussed with consideration of the outer voltage loop. Then the dynamical effects of the feedback gain of the PI compensator and the equivalent series resistance (ESR) of the output capacitor on the CC controlled buck converter with a PI compensator are studied. Furthermore, the design-oriented closed-loop stability criterion is derived. Finally, PSIM simulations and experimental results are supplied to verify the theoretical analyses.

Injectable PTHF-based thermogelling polyurethane implants for long-term intraocular application

Kaiwen Zhang,Zengping Liu,Qianyu Lin,Yi Jian Boo,Valerie Ow,Xinxin Zhao,Daniel Soo Lin Wong,Jason Y. C. Lim,Kun Xue,Xinyi Su,Decheng Wu,Xian Jun Loh 한국생체재료학회 2022 생체재료학회지 Vol.26 No.4

Background: Hydrogels show great potential to be used for intraocular applications due to their high-water content and similarity to the native vitreous. Injectable thermosensitive hydrogels through a small-bore needle can be used as a delivery system for drugs or a tamponading substitute to treat posterior eye diseases with clear clinical potential. However, none of the currently available thermosensitive hydrogels can provide intraocular support for up to 3 months or more. Method: In this study, an injectable polytetrahydrofuran (PTHF)-based thermosensitive hydrogel was synthesized by polyurethane reaction. We examined the injectability, rheological properties, microstructure, cytotoxicity, and in vivo compatibility and stability of the hydrogels in rabbit eyes. Results: We found that the PTHF block type and PTHF component ratio could modulate thermogelation properties of the polyurethane polymers. The PTHF-based hydrogel implants retained normal retinal structure and function. Incorporating bioinert PTHF generated highly biocompatible and more stable thermogels in the vitreous cavity, with gel networks and the presence of polymer still observed after 3 months when other thermogels would have been completely cleared. Moreover, despite lacking hydrolytically cleavable linkages, the polymers could be most naturally removed from the native vitreous by bio-erosion without additional surgical interventions. Conclusion: Our findings suggest the potential of incorporating hydrophobic bioinert blocks to enhance the in vivo stability of supramolecularly associated hydrogels for long-term intraocular applications.

Design-Oriented Stability of Outer Voltage Loop in Capacitor Current Controlled Buck Converters

Xi Zhang,Zhongwei Zhang,Bocheng Bao,Han Bao,Zhimin Wu,Kaiwen Yao,Jing Wu 전력전자학회 2019 JOURNAL OF POWER ELECTRONICS Vol.19 No.4

Due to the inherent feedforward of load current, capacitor current (CC) control shows a fast transient response that makes itsuitable for the power supplies used in various portable electronic devices. However, considering the effect of the outer voltageloop, the stable range of the duty-cycle is significantly diminished in CC controlled buck converters. To investigate the stabilityeffect of the outer voltage loop on buck converters, a CC controlled buck converter with a proportion-integral (PI) compensatoris taken as an example, and its second-order discrete-time model is established. Based on this model, the instability caused by theduty-cycle is discussed with consideration of the outer voltage loop. Then the dynamical effects of the feedback gain of the PIcompensator and the equivalent series resistance (ESR) of the output capacitor on the CC controlled buck converter with a PIcompensator are studied. Furthermore, the design-oriented closed-loop stability criterion is derived. Finally, PSIM simulationsand experimental results are supplied to verify the theoretical analyses.

Analgesic and anti-inflammatory effects of galangin: a potential pathway to inhibit transient receptor potential vanilloid 1 receptor activation

Kaiwen Lin,Datian Fu,Zhongtao Wang,Xueer Zhang,Canyang Zhu 대한통증학회 2024 The Korean Journal of Pain Vol.37 No.2

Background: Galangin, commonly employed in traditional Chinese medicine for its diverse medicinal properties, exhibits potential in treating inflammatory pain. Nevertheless, its mechanism of action remains unclear. Methods: Mice were randomly divided into 4 groups for 7 days: a normal control group, a galangin-treated (25 and 50 mg/kg), and a positive control celecoxib (20 mg/kg). Analgesic and anti-inflammatory effects were evaluated using a hot plate test, acetic acid-induced writhing test, acetic acid-induced vascular permeability test, formalininduced paw licking test, and carrageenan-induced paw swelling test. The interplay between galangin, transient receptor potential vanilloid 1 (TRPV1), NF-κB, COX-2, and TNF-α proteins was evaluated via molecular docking. COX- 2, PGE2, IL-1β, IL-6, and TNF-α levels in serum were measured using ELISA after capsaicin administration (200 nmol/L). TRPV1 expression in the dorsal root ganglion was analyzed by Western blot. The quantities of substance P (SP) and calcitonin gene-related peptide (CGRP) were assessed using qPCR. Results: Galangin reduced hot plate-induced licking latency, acetic acid-induced contortions, carrageenantriggered foot inflammation, and capillary permeability in mice. It exhibited favorable affinity towards TRPV1, NF- κB, COX-2, and TNF-α, resulting in decreased levels of COX-2, PGE2, IL-1β, IL-6, and TNF-α in serum following capsaicin stimulation. Galangin effectively suppressed the upregulation of TRPV1 protein and associated receptor neuropeptides CGRP and SP mRNA, while concurrently inhibiting the expression of NF-κB, TNF-α, COX-2, and PGE2 mRNA. Conclusions: Galangin exerts its anti-inflammatory pain effects by inhibiting TRPV1 activation and regulating COX-2, NF-κB/TNF-α expression, providing evidence for the use of galangin in the management of inflammatory pain.

Complexity of Driving Scenarios Based on Traffic Accident Data

Dong Xinchi,Zhang Daowen,Mu Yaoyao,Zhang Tianshu,Tang Kaiwen 한국자동차공학회 2024 International journal of automotive technology Vol.25 No.1

To solve the problems of diffi cult quantifi cation of complex driving scenes and unclear classifi cation, a method of complex measurement and scene classifi cation was proposed. Based on the Bayesian network, the posterior probability distribution was obtained, the variable weights were determined by information entropy theory and BP neural network, and the gravitational model was improved so that the complex metric model of the driving scene was established, the static and dynamic complexity of the scene was quantifi ed respectively, and a weighted fusion of the two was conducted. The K-means clustering method was used to divide the driving scenario into three categories, i.e., simple scenario, medium complex scenario, and complex scenario, and the rationality of the method was verifi ed by experiments. This scenario complex metric method can provide a reference for studying the complex metrics and scene classifi cation of smart vehicle test scenarios.

Fabrication of graphene‑assisted voltammetry platform for the detection of nitrate ions in PM2.5

Huadong Li,Yang Zhang,Kaiwen Feng,Chuan Wei 한국탄소학회 2023 Carbon Letters Vol.33 No.7

This study presents the fabrication and application of a graphene-assisted voltammetry platform for the sensitive detection of nitrate ions in PM2.5 (atmospheric aerosols with a maximum diameter of 2.5 μm). The MoS2/ reduced graphene oxide/ glassy carbon electrode ( MoS2/rGO/GCE) was prepared using a simple and efficient electrochemical deposition method. The rationale behind selecting MoS2/ rGO stems from their individual properties that, when combined, can enhance the electrode’s performance. MoS2 offers excellent electro-catalytic activity and selectivity for nitrate ion detection, while rGO provides high conductivity and a large surface area for enhanced sensitivity. The electrochemical performance of MoS2/ rGO/GCE was investigated and compared with MoS2/ GCE and bare GCE using cyclic voltammetry and electrochemical impedance spectroscopy. The results demonstrated that MoS2/ rGO/GCE exhibited enhanced electro-catalytic activity, high conductivity, and improved selectivity for nitrate ion detection. The optimal pH value for detecting nitrate ions was determined to be 8.0. Differential pulse voltammetry (DPV) was employed to investigate the linear range and detection limit of nitrate ions on MoS2/ rGO/GCE, resulting in a linear range from 1 to 300 μM and a detection limit of 0.35 μM. The reproducibility and the stability of MoS2/ rGO/GCE were assessed, showing satisfactory performance. Real sample analysis from Chengdu City showed a strong correlation between the results obtained using MoS2/ rGO/GCE and ion chromatography, highlighting its potential application in monitoring nitrate ions in PM2.5. The findings of this study contribute to the development of a graphene-assisted voltammetry platform for sensitive nitrate ion detection in PM2.5, offering potential benefits for real-time air pollution monitoring and environmental health assessments.

Research on MR-Tree Spatial Query Authenticated Index Introduced Neighbor Relationship

Xiaofu Wei,Shenglin Li,Zuofei Tan,Kaiwen Luo,San Zhang 보안공학연구지원센터 2016 International Journal of Database Theory and Appli Vol.9 No.10

In database outsourcing, the data owner delegates the tasks of data management to a third-party service provider. As the service provider may be untrusted or susceptible to attacks, query authentication is an essential part. Merkle R-tree (MR-tree) is one of the most efficient authenticated index that combines Merkle hash tree with R*-tree. MR-tree can provide an efficient range query authentication, however, as it uses the traditional R*-tree query structure in neighbor queries, a large number of unnecessary nodes may be accessed, and that can affect the efficiency of the query. In this paper, the neighbor relationship is introduced into the construction of MR-tree, and we propose a new index structure, called VMR-tree that incorporates the Voronoi diagram into MR-tree. In order to utilize VMR-tree index structure, we propose algorithms for spatial nearest neighbor queries and experiments to verify it has a better efficiency in spatial neighbor query authentication.

High‑speed growth of high‑quality polycrystalline diamond films by MPCVD

Kai Chen,Tao Tao,Wenxiao Hu,Yucong Ye,Kaiwen Zheng,Jiandong Ye,Ting Zhi,Xiwei Wang,Bin Liu,Rong Zhang 한국탄소학회 2023 Carbon Letters Vol.33 No.7

High-quality diamond films have attracted extensive attentions due to their excellent optical and electrical properties. However, several issues, such as random orientation, stress accumulation, and slow growth rate, severely limit its applications. In this paper, high-quality polycrystalline diamond films with highly ordered (100) orientation were prepared by microwave plasma chemical vapor deposition. The effects of growth parameters on the microstructure, quality and residual stress of diamond films were investigated. Experimental results indicate that relatively high temperature at low methane concentration will promote the formation of (100) oriented grains with a low compressive stress. Optimized growth parameters, a methane concentration of 2% along with a pressure of 250 Torr and temperature at 1050 ℃, were used to acquire high growth rate of 7.9 μm/h and narrow full width at half maximum of Raman peak of 5.5 cm? 1 revealing a high crystal quality. It demonstrates a promising method for rapid growth of high-quality polycrystalline diamond films with (100) orientation, which is vital for improving the diamond related applications at low cost.

Effect of Various Retrogression Regimes on Aging Behavior and Precipitates Characterization of a High Zn-Containing Al–Zn–Mg–Cu Alloy

Kai Wen,Baiqing Xiong,Yongan Zhang,Zhihui Li,Xiwu Li,Shuhui Huang,Lizhen Yan,Hongwei Yan,Hongwei Liu 대한금속·재료학회 2018 METALS AND MATERIALS International Vol.24 No.3

In the present work, the infl uence of various retrogression treatments on hardness, electrical conductivity and mechanicalproperties of a high Zn-containing Al–Zn–Mg–Cu alloy is investigated and several retrogression regimes subjected to a samestrength level are proposed. The precipitates are qualitatively investigated by means of transmission electron microscopy(TEM) and high-resolution transmission electron microscopy techniques. Based on the matrix precipitate observations, thedistributions of precipitate size and nearest inter-precipitate distance are extracted from bright-fi eld TEM images projectedalong ⟨110⟩ Al orientation with the aid of an imaging analysis and an arithmetic method. The results show that GP zonesand η′ precipitates are the major precipitates and the precipitate size and its distribution range continuously enlarge with theretrogression regime expands to an extent of high temperature. The nearest inter-precipitate distance ranges obtained arequite the same and the average distance of nearest inter-precipitates show a slight increase. The infl uence of precipitates onmechanical properties is discussed through the interaction relationship between precipitates and dislocations.

Measurement and Theoretical Calculation Confirm the Improvement of T7651 Aging State Influenced Precipitation Characteristics on Fatigue Crack Propagation Resistance in an Al–Zn–Mg–Cu Alloy

Kai Wen,Baiqing Xiong,Yongan Zhang,Zhihui Li,Xiwu Li,Lizhen Yan,Hongwei Yan,Hongwei Liu 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.5

Precipitation characteristics influencing fatigue crack propagation contained matrix precipitate, grain boundary precipitateand precipitate free zone for Al–Zn–Mg–Cu alloys. Over-aging treatment could effectively regulate precipitation and then tobe able to change fatigue crack propagation behavior compared with the peak aging state. In the current work, typical T651and T7651 aging tempers of the alloy were extracted via hardness, electrical conductivity and mechanical properties underone-step and two-step aging treatments. Fatigue crack propagation (FCP) rate under them was tested and correspondingprecipitation characteristics and fracture morphology were observed. The results indicated that fatigue crack propagationresistance for the T7651 temper possessed an obvious improvement on the side of that for the T651 temper, which was alsosupported by fracture appearance, including tearing ridge, tearing dimple and fatigue striation. The precipitation observationshowed that the T651 alloy contained GPI zone, GPII zone and ηʹ phase while the T7651 alloy possessed ηʹ phase and η phase.Compared with the T651 temper, matrix precipitate for the T7651 temper distinctly owed an expanding of size distributionand an enlargement of average size while cuttable phase still remained the dominance for both tempers. Grain boundaryprecipitate and precipitate free zone manifested no obvious difference between the two aging tempers. Cut and bypass mechanismsof dislocation–precipitate interactions were used for explanation and it revealed the reinforced cuttable phase was infavor of enhancing fatigue crack propagation resistance. A theoretical model which directly correlated FCP rate with matrixprecipitate characteristics was employed to calculate FCP rate by substituting quantitative precipitate characteristics and thecalculation results were vaguely consistent with the experimental measurement, which proved its reliability and feasibility.