http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Mousa, H.M.,Hussein, K.H.,Pant, H.R.,Woo, H.M.,Park, C.H.,Kim, C.S. Elsevier 2016 Colloids and surfaces. A, Physicochemical and engi Vol.488 No.-
<P>Magnesium (Mg), and its alloys have good potential for using in biomedical applications due to its good mechanical properties and biodegradability. However, the poor corrosion resistance and insufficient mechanical stability of Mg in biological fluids have limited its clinical applicability. As a result, surface modification techniques are being investigated to improve corrosion resistance for biomedical applications. In this study, a bioactive CaP film were deposited on the surface of the AZ31B magnesium alloy via anodization with SBF solution used as the electrolyte with and without ZrO2 Nanoparticles (NPs). The samples were evaluated and characterized in vitro to assess their degradation and cytocompatability behaviour via FE-SEM, electrochemical corrosion test, immersion test, and cell culture tests. The results indicate that the AZ31B Mg alloy surface anodized in SBF with and without ZrO2 NPs consists of CaP nanoplate leaf-like apatite structures and porous 3-D structures, respectively. The nanomorphology showed uniform growth on the anodized surface that had created the porous layer on the surface of the samples three days after immersion in the SBF solution. The formation of such nanostructures on the anodized sample could provide the implant materials with extra biocompatibility. Moreover, this unique deposited layer can improve the corrosion resistance and cytocompatability of the Mg alloys, which make it a promising material for use in biomedical applications. (C) 2015 Elsevier B.V. All rights reserved.</P>
ON ASYMPTOTIC BEHAVIOUR OF THE DIFFERENCE EQUATION $X_{N+l}$ = $\alpha$ =+$\frac{X_{n-1^P}}{X_n^P}$
El-Owaidy, H.M.,Ahmed, A.M.,Mousa, M.S. 한국전산응용수학회 2003 Journal of applied mathematics & informatics Vol.12 No.1
In this Paper, we investigate local stability, oscillation and bounde-ness character of positive solutions of the difference equation $X_{N+l}$ = $\alpha$ + ( $X_{N-1}$$^{P/)}$( $X_{N}$$^{P}$), n = 0, 1, … under specified conditions.s.tions.s.
Adhikari, S.P.,Pant, H.R.,Mousa, H.M.,Lee, J.,Kim, H.J.,Park, C.H.,Kim, C.S. Korean Society of Industrial and Engineering Chemi 2016 Journal of industrial and engineering chemistry Vol.35 No.-
<P>Highly porous, hollow TiO2 nanofibers (NFs) were fabricated through coaxial nozzle electrospinning using a polymer sol-gel solution of CaCO3 and TiO2 precursor. Hollow and porous TiO2 NFs were obtained by etching CaCO3 on calcined TiO2 fibers using dilute HCl. Characterization of the as-synthesized materials were performed using FE-SEM and XRD before and after 24 h of bio-mineralization. The in vitro cell culture test was performed using MC3T3-E1 osteoblast cells to assess cell response of the different NFs. The results suggested that as-synthesized porous nanotubes have better biocompatibility for bone regeneration and implantations compared to other nonporous TiO2 nanorods or NFs. (C) 2015 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.</P>
Yasin, A.S.,Mohamed, H.O.,Mohamed, I.M.A.,Mousa, H.M.,Barakat, N.A.M. Elsevier Science B.V 2016 Separation and purification technology Vol.171 No.-
Due to its eco-friendly and low energy technique for removing salt ions from saline water, capacitive deionization (CDI) is highly recommended as a desalination process. Based on its good features, large surface area and good electric conductivity, graphene oxide is a promising electrode in the CDI technology if the specific capacitance could be enhanced. In this study, to improve the electrochemical performances, novel ZrO<SUB>2</SUB> nanoparticles-incorporated graphene oxide nanosheets with different concentrations were successfully synthesized by hydrothermal treatment, their electrosorption characteristics in CDI unit were examined. The morphology, structure and electrochemical performance of the fabricated materials were investigated by scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), cyclic voltammetry and electrochemical impedance spectroscopy. The capacitive and electrosorption performances in NaCl solution were studied. Moreover, the role of ZrO<SUB>2</SUB> loading was investigated. The introduced ZrO<SUB>2</SUB>-doped graphene oxide showed a distinct improvement in the electrosorption capacity and revealed higher specific capacitance compared to the pristine graphene oxide. The obtained results indicated that the synthesized ZrO<SUB>2</SUB>-doped graphene oxide nanocomposite having 10wt.% ZrO<SUB>2</SUB> displayed a significant increase in the specific capacitance as the corresponding value (452.06F/g) was nine folds more than that of the pristine GO at 10mV/s. Moreover, the same electrode exhibits great cycling stability, excellent salt removal efficiency (93.03%), and distinct electrosorptive capacity (4.55mg/g). Overall, the proposed GO/ZrO<SUB>2</SUB> nanoparticle composite electrode is appropriate for utilizing as optimum electrodes for the CDI technique.
Shrestha, B.K.,Ahmad, R.,Mousa, H.M.,Kim, I.G.,Kim, J.I.,Neupane, M.P.,Park, C.H.,Kim, C.S. Academic Press 2016 JOURNAL OF COLLOID AND INTERFACE SCIENCE - Vol.482 No.-
A highly electroactive bio-nanohybrid film of polypyrrole (PPy)-Nafion (Nf)-functionalized multi-walled carbon nanotubes (fMWCNTs) nanocomposite was prepared on the glassy carbon electrode (GCE) by a facile one-step electrochemical polymerization technique followed by chitosan-glucose oxidase (CH-GOx) immobilization on its surface to achieve a high-performance glucose biosensor. The as-fabricated nanohybrid composite provides high surface area for GOx immobilization and thus enhances the enzyme-loading efficiency. The structural characterization revealed that the PPy-Nf-fMWCNTs nanocomposite films were uniformly formed on GCE and after GOx immobilization, the surface porosities of the film were decreased due to enzyme encapsulation inside the bio-nanohybrid composite materials. The electrochemical behavior of the fabricated biosensor was investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and amperometry measurements. The results indicated an excellent catalytic property of bio-nanohybrid film for glucose detection with improved sensitivity of 2860.3μAmM<SUP>-1</SUP>cm<SUP>-2</SUP>, the linear range up to 4.7mM (R<SUP>2</SUP>=0.9992), and a low detection limit of 5μM under a signal/noise (S/N) ratio of 3. Furthermore, the resulting biosensor presented reliable selectivity, better long-term stability, good repeatability, reproducibility, and acceptable measurement of glucose concentration in real serum samples. Thus, this fabricated biosensor provides an efficient and highly sensitive platform for glucose sensing and can open up new avenues for clinical applications.
M. R. Akbarpour,H. Mousa Mirabad,R. Behjat Golenji,K. Kakaei,H. S. Kim 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.9
In this study, ultra-fine grained Cu and Cu + carbon nanotube (CNT) nanocomposites were prepared through a processescombining flake powder metallurgy, hot pressing, and high-pressure torsion (HPT). The effects of grain refinement and CNTreinforcement on the microstructure, hardness, wear resistance, and corrosion behavior of the newly developed nanocompositeswere investigated. The results indicated that the HPT process decreased the grain size of Cu and Cu + CNT by 67.7%and 68.1%, respectively, and increased their microhardness by 151% and 132%. The addition of CNTs substantially improvedthe tribological behavior of Cu by generating a mechanically mixed carbon- and oxide-rich layer. Moreover, polarizationand electrochemical impedance spectroscopy tests revealed that the CNTs have a negligible adverse effect on the corrosionresistance of the Cu + CNT nanocomposites. The influences of the processing route and CNTs are discussed.
Mohammed-Salleh M. Ardawi,Abdulrahim A. Rouzi,Nawal S. Al-Senani,Mohammed H. Qari,Ayman Z. Elsamanoudy,Shaker A. Mousa 대한골대사학회 2018 대한골대사학회지 Vol.25 No.2
Background: Higher sphingosine 1-phosphate (S1P) plasma levels are associated with decreased bone mineral density (BMD), and increased risk of prevalent vertebral fracture. So, we hypothesized that postmenopausal women with increased baseline plasma S1P levels have a greater risk for future incident fracture (osteoporosis-related fractures [ORFs]). Methods: This study was conducted in a prospective longitudinal cohort of 707 women recruited in 2004 and followed up annually for a mean period of 5.2±1.3 years. They were postmenopausal (aged ≥50 years). The primary outcome measure was the time to the first confirmed ORF event using radiographs and/or a surgical report. Results: The plasma S1P levels (μmol/L) were significantly higher in the women with incident fracture (7.23±0.79) than in those without ORFs (5.02±0.51; P<0.001). High S1P levels were strongly associated with increased fracture risk. After adjustment for age and other confounders, the hazard ratio (HR) was 6.12 (95% confidence interval [CI], 4.92-7.66) for each 1-standard deviation increase in plasma S1P levels. The women in the highest quartile of S1P levels had a significant increase in fracture risk (HR, 9.89; 95% CI, 2.83-34.44). Results were similar when we compared plasma S1P levels at the 1-year visit. Conclusions: The associations between plasma S1P levels and fracture risk were independent of BMD and other confounders. These findings demonstrate that high plasma S1P level at baseline and at years 1 to 5 is a strong and independent risk factor for future [ORFs] among postmenopausal women and could be a useful biomarker for fracture risk assessment in this population.