http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이원복(Won Bok Lee),이창훈(Chang Whun Lee),정봉수(Bong Soo Chung),김범수(Bum Soo Kim),김대진(Dea Jin Kim),김성수(Sung Soo Kim),김경용(Kyung Yong Kim) 대한해부학회 2002 Anatomy & Cell Biology Vol.35 No.4
태령 제11주부터 제23주에 이르는 5예의 태아간을 대상으로 연속초박절편을 이용한 투과전자현미경 관찰을 통하여 거 대핵세포형성세포의 발육, 거주와 이주과정 등을 관찰하여 다음과 같은 결론을 얻었다. 1. 거대핵세포형성세포는 대부분 동굴주위공간이나 동굴모세혈관벽의 내피밑 구역에 위치하였지만 일부에서는 이주된 세포가 동굴모세혈관 속공간에서도 관찰되었다. 2. 거대핵모세포는 세포핵비율이 높고 하나의 큰 핵과 한 두 개의 뚜렷한 핵소체를 가지며 핵막은 함몰되어졌다. 세포 질에서는 미성숙한 세포소기관이 산재하였으며 세포막은 작은 융모성돌기와 긴 세포질돌기들이 자주 발견되었다. 미성숙 거대핵세포가 성숙하면서 핵은 분엽화가 일어나고 세포질은 구역화와 특이 과립의 출현, 경계막계통의 형성 등이 일어나 면서 성숙되었다. 3. 일부 거대핵세포는 동굴모세혈관 벽의 내피세포를 관통하고 있거나 이미 이주되어 동굴모세혈관 속공간에서 관찰되 기도 하였다. 또한 미성숙 거대핵세포의 세포질에서는 미성숙 적혈구모세포나 세망적혈구가 포함되어있는 엠페리폴레시 스도 확인되었다. 이상을 종합하면 태아간 거대핵세포형성에서 미성숙 거대핵세포의 위치는 대부분 혈관주위공간이며 일부에서는 동굴 모세혈관 속공간에서도 거주하면서 혈관속거대핵세포형성과 혈관밖거대핵세포형성에 의해 특징적으로 계속적인 성장과 정을 밟을 수 있다. Liver tissuses obtained from 5 human fetuses between 11 weeks and 23 weeks of gestation during the high activity of hepatic hemopoiesis were observed with transmission electron microscope using continuous series of thin sections. The objective of present study was to evaluate ultrastructures of megakaryopoietic cells, the migration of extravascular megakaryocyte into the sinusoidal lumen and the relevence between a migrated megakaryocyte and a Kupffer cell. Immature megakaryocytes were usually observed between growing hepatic laminae and within hepatic sinusoids. A megakaryoblast contained numerous polyribosomes, rather large mitochondria, short tubular elements of rough endoplasmic reticulum and small granules. Moreover, demarcation tubules and a few small specific granules were observed in immature megakaryocytes. The nucleus was mononuclear but frequently indented. With maturation, the nuclei were multilobulated. In the cytoplasm, in contrast to the decrease in polyribosomes and rough endoplasmic reticulum, the numerous specific granules and well-developed demarcation membrane system were predominant. Thereafter cytoplasmic zonation was observed clearly in maturing and mature megakaryocytes. Some megakaryocytes passed through the sinusoidal lining epithelium and into the hepatic sinusoids. The cell to cell interaction was often found as adhesion between migrated megakaryocyte and Kupffer cell, and erythroblasts within megakaryocyte (emperipolesis). These results suggest that intravascular megakaryopoiesis in addition to extravascular megakaryopoiesis occurs to produce platelet during the human fetal liver.
폐촉매 부산물로부터 대체 응집제 제조 및 응집성능 평가
이상원(Sang Won Lee),문태섭(Tae Sup Moon),김효수(Hyo Soo Kim),최명원(Myung Won Choi),이대선(Dea Sun Lee),박상태(Sang Tae Park),김창원(Chang Won Kim) 大韓環境工學會 2014 대한환경공학회지 Vol.36 No.7
본 연구에서는 상용 응집제와 동일한 응집 성능을 확보할 수 있는 대체 응집제(황산알루미늄 용액)의 제조 가능성을 평가하였다. 사용된 대체 응집제 원료는 폴리머 제조 공정에서 발생하는 폐촉매 부산물(Waste activated alumina)이며, 대체 응집제는 1) 강열 및 분쇄, 2) 황산과의 화학적 중합 및 치환 반응, 3) 용해 및 희석, 4) 침전 및 분리과정을 거쳐 제조되었다. 실험실 규모의 autoclave 및 용해조에서의 최적 운전 조건을 도출하기 위해 황산 순도, 반응 온도, 황산 주입비 및 용해조에서의 물 주입비의 변화 등에 따른 대체 응집제 내 Al₂O₃ 함량이 분석되었다. 연구 결과, 황산 순도 50%, 반응 온도 120℃, 황산 주입비 5배 및 용해조 물 주입비 2.5배의 조건하에서, 7~8% 범위의 Al₂O₃ 함량을 가지는 대체 응집제가 제조된다는 것이 확인되었다. 대체 응집제의 응집 성능을 평가하기 위해 호기조 유출수를 대상으로 Jar-test를 수행한 결과, Al/P의 몰비를 1.5 및 2.0으로 주입한 두 가지 경우 모두에서 기존 응집제의 인 제거 성능과 유사하거나 더 높은 제거 성능이 확인되었다. 추가적으로 경제성 평가를 통해 상용 응집제와 비교했을 때 50% 이상의 생산 단가 절감이 가능하였고, 생태독성 평가를 통해 환경적 문제없이 대체 응집제가 실제 하수처리장 또는 폐수처리장에 적용될 수 있는 것이 확인되었다. In this study, the production potential of alternative coagulant (Al₂(SO₄)3 solution) having the identical coagulation activity with respect to the commercial coagulant was investigated. The raw material of alternative coagulant was a spent catalyst including aluminium (waste activated alumina) generated in the manufacturing process of the polymer. The alternative coagulant was produced through a series of processes: 1) intense heat and grinding, 2) chemical polymerization and substitution with H₂SO₄ solution, 3) dissolution and dilution and 4) settling and separation. To determine the optimal operating conditions in the lab scale autoclave and dissolver, the content of Al₂O₃ in alternative coagulant was analyzed according to changes of the purity of sulfuric acid, reaction temperature, injection ratio of sulfuric acid and water in the dissolver. The results showed that the alternative coagulant having the Al₂O₃ content of 7~8% was produced under the optimal conditions such as H₂SO₄ purity of 50%, reaction temperature of 120℃, injection ratio of H₂SO₄ of 5 times and injection ratio of water of 2.3 times in dissolver. In order to evaluate the coagulation activity of the alternative coagulant, the Jar-test was conducted to the effluent in aerobic reactor. As a result, in both cases of Al/P mole of 1.5 and 2.0, the coagulation activity of the alternative coagulant was higher than that of the existing commercial coagulant. When the production costs were compared between the alternative and commercial coagulant through economic analysis, the production cost reduction of about 50% was available in the case of the alternative coagulant. In addition, it was identified that the alternative coagulant could be applied at field wastewater treatment plant without environmental problem through ecological toxicity testing.
이형근,김인원,이우석,조항대,김선근 한국화학공학회 1996 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.34 No.6
습식 배연탈황공정에서 국내산 석회석의 용해속도를 측정하고, 입자크기, 조성 및 입자크기분포가 석회석의 용해반응에 미치는 영향을 연구하였다. 조성이 다른 5종류의 석회석을 각각 325 mesh, 200 mesh, 100 mesh의 입자크기로 나누어 회분식 및 연속식으로 실험하였다. 회분식 실험에서는 석회석의 종류에 관계없이 입자크기가 작은 것을 많이 포함하는 325 mesh의 석회석의 용해속도가 가장 빨랐으며, 200 mesh, 100 mesh 순으로 나타났다. 또 동일한 입자크기일 경우 석회석의 용해속도는 석회석의 조성에 큰 영향을 받는다. 특히 3% MgO에 의해 순수한 석회석의 경우보다 두 배 정도의 용해속도 상승효과를 나타내었으나, 입자크기가 커질수록 그 영향은 감소하였다. 연속식 실험에서도 회분식 실험에서와 같기 입자 크기가 감소할수록 석회석의 이용도가 높게 나타났다. The rates of dissolution of domestic limestones in the wet type flue gas desulfurization process were measured and the effects of particle size distribution and composition of limestone through the limestone reaction were studied. Five domestic limestone samples of different size distribution(325, 200 and 100 mesh) were tested in both batch and continuous apparatuses. The limestone dissolution rate data measured in the batch experiment system indicated that limestone dissolution rate can be improved by small limestone particles. Relative ranking of limestone dissolution rate was 325 mesh > 200 mesh > 100 mesh. At a fixed size of limestones, the dissolution rates were affected by the composition of limestone, especially MgO. The rates were improved two times by limestone of 3% MgO than pure limestone. But the composition effects to the dissolution rates were reduced as increasing the size of the particles. The continuous type experiments also showed that more limestone was dissolved as the size of limestone decreased.
Lim, Won Gyu,Lee, Dea Uk,Na, Han Gil,Kim, Hyoun Woo,Kim, Tae Whan Elsevier BV * North-Holland 2018 Applied Surface Science Vol.432 No.2
<P><B>Abstract</B></P> <P>Organic bistable devices (OBDs) with exfoliated mica nanoparticles (NPs) embedded into an insulating poly(methylmethacrylate) (PMMA) layer were fabricated by using a spin-coating method. Current–voltage (I–V) curves for the Al/PMMA/exfoliated mica NP/PMMA/indium-tin-oxide/glass devices at 300K showed a clockwise current hysteresis behavior due to the existence of the exfoliated muscovite-type mica NPs, which is an essential feature for bistable devices. Write-read-erase-read data showed that the OBDs had rewritable nonvolatile memories and an endurance number of ON/OFF switching for the OBDs of 10<SUP>2</SUP> cycles. An ON/OFF ratio of 1×10<SUP>3</SUP> was maintained for retention times larger than 1×10<SUP>4</SUP> s. The memory mechanisms of the fabricated OBDs were described by using the trapping and the tunneling processes within a PMMA active layer containing exfoliated muscovite-type mica NPs on the basis of the energy band diagram and the I–V curves.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Organic bistable devices (OBDs) with exfoliated mica NPs embedded into an insulating PMMA layer were fabricated. </LI> <LI> Current–voltage curves for the devices showed a bistability with an ON/OFF ratio of 1×10<SUP>3</SUP>. </LI> <LI> ON and the OFF states for the devices endured for 10<SUP>2</SUP> cycles. </LI> <LI> ON/OFF ratio of 1×10<SUP>3</SUP> was maintained for retention times larger than 1×10<SUP>4</SUP> s. </LI> <LI> Memory mechanisms for the devices were attributed to the F-N tunneling process. </LI> </UL> </P>
Fringe-Field Switching (FFS) 모드의 유전율 이방성의 부호에 따른 전기광학 특성 연구
김대형 ( Dea Hyung Kim ),장인원 ( In Won Jang ),임영진 ( Young Jin Lim ),유일수 ( Il Soo Yoo ),김기현 ( Gi Heon Kim ),김용해 ( Yong Hae Kim ),이승희 ( Seung Hee Lee ) 한국화상학회 2014 한국화상학회지 Vol.20 No.1
Fringe-Field Switching (FFS) 모드는 모든 고화질 액정디스플레이에 적용되고 있다. FFS 모드의 전기광학 특성은 전극 구조, 위상지연값, 러빙각, 셀갭, 액정의 유전율 이방성 (Δε) 크기 및 부호와 같은 셀 및 액정 변수에 따라 크게 의존한다. 본 연구에서는 FFS 모드에서 유전율 이방성의 부호가 다르지만 크기가 동일한 조건에서 FFS모드의 전기광학 특성을 연구하였다. 연구 결과에 의하면 전압 인가시 Δε 절대값이 같더라도 유전율 이방성이 음인 액정의 경우가 탄성변형이 용이해 유전율 이방성 양인 액정에 비해 구동 전압이 약 10% 정도 낮은 결과를 보여주었다. 이러한 결과는 FFS모드의 본질을 이해하는데 큰 도움을 준다고 확신한다. Recently, fringe field switching (FFS) mode in liquid crystal displays is mainly used for high image quality liquid crystal displays (LCDs). Electro-optic characteristics of FFS-LCDs liquid crystal (LC) depend on many cell parameters such as electrode structure, retardation, rubbing angle, cell gap and sign and magnitude of dielectric anisotropy. In this study, we have investigated electro-optic characteristics of the FFS mode as a function of a sign of dielectric anisotropy while keeping the magnitude of dielectric anisotropy of liquid crystals and other cell parameters to be the same. The results show that for the LC with negative dielectric anisotropy (-LC) shows lower operating voltage than that of a LC with positive dielectric anisotropy by about 10%, owing to easier elastic deformation responding to applied voltage in a -LC. The result will help understand the intrinsic switching behavior of the FFS mode.