http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Nonlocal strain gradient theory for bending analysis of 2D functionally graded nanobeams
Aicha Bessaim,Mohammed Sid Ahmed Houari,Smain Bezzina,Ali Merdji,Ahmed Amine Daikh,Mohamed-Ouejdi Belarbi,Abdelouahed Tounsi 국제구조공학회 2023 Structural Engineering and Mechanics, An Int'l Jou Vol.86 No.6
This article presents an analytical approach to explore the bending behaviour of of two-dimensional (2D) functionally graded (FG) nanobeams based on a two-variable higher-order shear deformation theory and nonlocal strain gradient theory. The kinematic relations are proposed according to novel trigonometric functions. The material gradation and material properties are varied along the longitudinal and the transversal directions. The equilibrium equations are obtained by using the virtual work principle and solved by applying Navier’s technique. A comparative evaluation of results against predictions from literature demonstrates the accuracy of the proposed analytical model. Moreover, a detailed parametric analysis checks for the sensitivity of the bending and stresses response of (2D) FG nanobeams to nonlocal length scale, strain gradient microstructure scale, material distribution and geometry.
A nonlocal quasi-3D trigonometric plate model for free vibration behaviour of micro/nanoscale plates
Aicha Bessaim,Mohammed Sid Ahmed Houan,Fabrice Bernard,Abdelouahed Tounsi 국제구조공학회 2015 Structural Engineering and Mechanics, An Int'l Jou Vol.56 No.2
In this work, a nonlocal quasi-3D trigonometric plate theory for micro/nanoscale plates is proposed. In order to introduce the size influences, the Eringen’s nonlocal elasticity theory is utilized. In addition, the theory considers both shear deformation and thickness stretching effects by a trigonometric variation of all displacements within the thickness, and respects the stress-free boundary conditions on the top and bottom surfaces of the plate without considering the shear correction factor. The advantage of this theory is that, in addition to considering the small scale and thickness stretching effects (εz≠0), the displacement field is modelled with only 5 unknowns as the first order shear deformation theory (FSDT). Analytical solutions for vibration of simply supported micro/nanoscale plates are illustrated, and the computed results are compared with the available solutions in the literature and finite element model using ABAQUS software package. The influences of the nonlocal parameter, shear deformation and thickness stretching on the vibration behaviors of the micro/nanoscale plates are examined.
A new quasi-3D plate theory for free vibration analysis of advanced composite nanoplates
Smain Bezzina,Aicha Bessaim,Mohammed Sid Ahmed Houari,Marc Azab 국제구조공학회 2022 Steel and Composite Structures, An International J Vol.45 No.6
This paper presents an analytical solution to study the combined effect of non-local and stretching effect on the vibration of advanced functionally graded (FG) nanoplates. A new quasi-3D plate theory is presented; there are only five unknowns and any shear correction factor is used. A new displacement field with a new shear warping function is proposed. The equilibrium equations of the FG nanoplates are obtained using the Hamilton principle and solved numerically using the Navier technique. The material properties of functionally graded nanoplates are presumed to change according to the power-law distribution of ceramic and metal constituents. The numerical results of this work are compared with those of other published results to indicate the accuracy and convergence of this theory. Hence, a profound parameterstudy is also performed to show the influence of many parameters of the functionally graded nanoplates on the free vibration responses is investigated.
Bending analysis of advanced composite plates using a new quasi 3D plate theory
Tarek Houari,Aicha Bessaim,Mohammed Sid Ahmed Houari,Mohamed Benguediab,Abdelouahed Tounsi 국제구조공학회 2018 Steel and Composite Structures, An International J Vol.26 No.5
In this paper, a refined higher-order shear deformation theory including the stretching effect is developed for the analysis of bending analysis of the simply supported functionally graded (FG) sandwich plates resting on elastic foundation. This theory has only five unknowns, which is even less than the other shear and normal deformation theories. The theory presented is variationally consistent, without the shear correction factor. The present one has a new displacement field which introduces undetermined integral variables. Equations of motion are obtained by utilizing the Hamilton's principles and solved via Navier's procedure. The convergence and the validation of the proposed theoretical numerical model are performed to demonstrate the efficacy of the model.
Setti Elmascri,Aicha Bessaim,Ouahiba Taleb,Mohammed Sid Ahmed Houari,Sekkal Mohamed,Fabrice Bernard,Abdelouahed Tounsi 국제구조공학회 2020 Structural Engineering and Mechanics, An Int'l Jou Vol.75 No.2
This paper presents a new hyperbolic shear deformation plate theory including the stretching effect for free vibration of the simply supported functionally graded plates in thermal environments. The theory accounts for parabolic distribution of the transverse shear strains and satisfies the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. This theory has only five unknowns, which is even less than the other shear and normal deformation theories. The present one has a new displacement field which introduces undetermined integral variables. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume power laws of the constituents. The equation of motion of the vibrated plate obtained via the classical Hamilton’s principle and solved using Navier’s steps. The accuracy of the proposed solution is checked by comparing the present results with those available in existing literature. The effects of the temperature field, volume fraction index of functionally graded material, side-to-thickness ratio on free vibration responses of the functionally graded plates are investigated. It can be concluded that the present theory is not only accurate but also simple in predicting the natural frequencies of functionally graded plates with stretching effect in thermal environments.
Kheira Soltani,Aicha Bessaim,Mohammed Sid Ahmed Houari,Abdelhakim Kaci,Mohamed Benguediab,Abdelouahed Tounsi,Mohammed Sh Alhodaly 국제구조공학회 2019 Steel and Composite Structures, An International J Vol.30 No.1
This work presents the buckling investigation of functionally graded plates resting on two parameter elastic foundations by using a new hyperbolic plate theory. The main advantage of this theory is that, in addition to including the shear deformation effect, the displacement field is modelled with only four unknowns and which is even less than the first order shear deformation theory (FSDT) and higher-order shear deformation theory (HSDT) by introducing undetermined integral terms, hence it is unnecessary to use shear correction factors. The governing equations are derived using Hamilton‟s principle and solved using Navier‟s steps. The validation of the proposed theoretical model is performed to demonstrate the efficacy of the model. The effects of various parameters like the Winkler and Pasternak modulus coefficients, inhomogeneity parameter, aspect ratio and thickness ratio on the behaviour of the functionally graded plates are studied. It can be concluded that the present theory is not only accurate but also simple in predicting the critical buckling loads of functionally graded plates on elastic foundation.
Mohammed Sid Ahmed Houari,Aicha Bessaim,Fabrice Bernard,Abdelouahed Tounsi,S. R. Mahmoud 국제구조공학회 2018 Steel and Composite Structures, An International J Vol.28 No.1
A size-dependent novel hyperbolic shear deformation theory of simply supported functionally graded beams is presented in the frame work of the non-local strain gradient theory, in which the stress accounts for only the nonlocal strain gradients stress field. The thickness stretching effect (<i>ε<sub>z</sub></i> ≠ 0) is also considered here. Elastic coefficients and length scale parameter are assumed to vary in the thickness direction of functionally graded beams according to power-law form. The governing equations are derived using the Hamilton principle. The closed-form solutions for exact critical buckling loads of nonlocal strain gradient functionally graded beams are obtained using Navier's method. The derived results are compared with those of strain gradient theory.
Shear correction factors of a new exponential functionally graded porous beams
Mohammed Sid Ahmed Houari,Aicha Bessaim,Tarek Merzouki,Ahmed Amine Daikh,Aman Garg,Abdelouahed Tounsi,Mohamed A. Eltaher,Mohamed-Ouejdi Belarbi 국제구조공학회 2024 Structural Engineering and Mechanics, An Int'l Jou Vol.89 No.1
This article introduces a novel analytical model for examining the impact of porosity on shear correction factors (SCFs) in functionally graded porous beams (FGPB). The study employs uneven and logarithmic-uneven modified porositydependent power-law functions, which are distributed throughout the thickness of the FGP beams. Additionally, a modified exponential-power law function is used to estimate the effective mechanical properties of functionally graded porous beams. The correction factor plays a crucial role in this analysis as it appears as a coefficient in the expression for the transverse shear stress resultant. It compensates for the assumption that the shear strain is uniform across the depth of the cross-section. By applying the energy equivalence principle, a general expression for static SCFs in FGPBs is derived. The resulting expression aligns with the findings obtained from Reissner’s analysis, particularly when transitioning from the two-dimensional case (plate) to the onedimensional case (beam). The article presents a convenient algebraic form of the solution and provides new case studies to demonstrate the practicality of the proposed formulation. Numerical results are also presented to illustrate the influence of porosity distribution on SCFs for different types of FGPBs. Furthermore, the article validates the numerical consistency of the mechanical property changes in FG beams without porosity and the SCF by comparing them with available results.
Free vibration of functionally graded carbon nanotubes reinforced composite nanobeams
Miloud Ladmek,Abdelkader Belkacem,Ahmed Amine Daikh,Aicha Bessaim,Aman Garg,Mohammed Sid Ahmed Houari,Mohamed-Ouejdi Belarbi,Abdelhak Ouldyerou Techno-Press 2023 Advances in materials research Vol.12 No.2
This paper proposes an analytical method to investigate the free vibration behaviour of new functionally graded (FG) carbon nanotubes reinforced composite beams based on a higher-order shear deformation theory. Cosine functions represent the material gradation and material properties via the thickness. The kinematic relations of the beam are proposed according to trigonometric functions. The equilibrium equations are obtained using the virtual work principle and solved using Navier's method. A comparative evaluation of results against predictions from literature demonstrates the accuracy of the proposed analytical model. Moreover, a detailed parametric analysis checks for the sensitivity of the vibration response of FG nanobeams to nonlocal length scale, strain gradient microstructure-scale, material distribution and geometry.
A new simple three -unknown sinusoidal shear deformation theory for functionally graded plates
Abdelouahed Tounsi,Mohammed Sid Ahmed Houari,Aicha Bessaim,S. R. Mahmoud 국제구조공학회 2016 Steel and Composite Structures, An International J Vol.22 No.2
In this paper, a new simple higher-order shear deformation theory for bending and free vibration analysis of functionally graded (FG) plates is developed. The significant feature of this formulation is that, in addition to including a sinusoidal variation of transverse shear strains through the thickness of the plate, it deals with only three unknowns as the classical plate theory (CPT), instead of five as in the well-known first shear deformation theory (FSDT) and higher-order shear deformation theory (HSDT). A shear correction factor is, therefore, not required. Equations of motion are derived from Hamilton's principle. Analytical solutions for the bending and free vibration analysis are obtained for simply supported plates. The accuracy of the present solutions is verified by comparing the obtained results with those predicted by classical theory, first-order shear deformation theory, and higher-order shear deformation theory. Verification studies show that the proposed theory is not only accurate and simple in solving the bending and free vibration behaviours of FG plates, but also comparable with the other higher-order shear deformation theories which contain more number of unknowns.