http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A New MDR-based RFID System Architecture for Ubiquitous Computing Environment
정동원,이이섭,Jeong Dongwon,Lee Lee-Sub 한국시뮬레이션학회 2005 한국시뮬레이션학회 논문지 Vol.14 No.4
유비쿼터스 컴퓨팅은 무수히 많은 센서들이 관련 데이터 처리 시스템들과 또는 센서들 간의 정보 공유를 통해 서비스를 제공하면서 특정한 장치나 위치에 구애받지 않고 사용자들이 서비스를 이용할 수 있도록 해 준다. 이 논문에서는 유비쿼터스 환경하에서 현재 가장 활발하게 활용되고 있는 RFID(Radio Frequency IDentification) 시스템이 지니는 문제점을 정의하고 이를 극복할 수 있는 새로운 RFID 시스템 구조를 제안한다. 현재의 RFID 시스템은 특정 분야에만 한정하여 단순히 미리 주어진 태그의 식별자를 통해 대상을 식별하는 응용만으로 그 활용성이 제한되어 있다. 이 논문에서는 이러한 제한된 현재의 RFID 시스템의 문제점을 해결하고 유비쿼터스 환경에 적합한 활용성을 극대화할 수 있는 MDR(Metadata registry) 기반의 RFID 시스템 구조를 제안한다. 제안된 시스템은 특정 응용 분야에 종속되지 않고 다양한 분야와의 원활한 연계성을 제공한다. 또한 새로운 정보의 의미를 동적으로 처리할 수 있기 때문에 보다 넓은 응용 범위를 제공한다.
온도 성층화를 갖는 예혼합압축자기착화엔진에서 부스터 효과에 관한 수치해석
정동원(Dongwon Jeong),임옥택(Ocktaeck Lim),백영순(Youngsoon Baek) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.5
The method of thermal stratification in cylinder is known for reducing rate of pressure rise, but which has its limit to extend the higher-load operating region of HCCI engines, giving an output of insufficient IMEP. High fueling rate could be one way to get the enough IMEP but it could be occurring engine knock. This work investigates the potential of in-cylinder thermal stratification for reducing the rate of pressure rise in DME HCCI engines, and the coupling between thermal stratification and booster effect to get reduced rate of pressure rise as well as high IMEP. The computations were conducted using Senkin application of the CHEMKINII kinetics rate code, and kinetic mechanism for Di-Methyl Ether (DME). DME has unique 2 stage reaction called Low Temperature Reaction (LTR) and High Temperature Reaction (HTR). Due to the heat release from LTR, the thermal stratification of in-cylinder would be formed just before HTR with large temperature difference so the heat release from oxidation reaction dispersed through combustion process. Intensity of intake pressure is closely concerned in input calorie which means a higher IMEP would be appeared without high fueling rate. The study also shows that increasing the in-cylinder thermal width of the charge between each zone would allow the booster pressure to be raised from 0.1 ㎫ to 0. 18㎫ to get the higher IMEP as well as high thermal efficiency with low emissions.
분산화와 개방성 기반의 메타데이터 레지스트리 확장 모델
정동원(Dongwon Jeong) 한국정보기술학회 2020 한국정보기술학회논문지 Vol.18 No.1
This paper proposes an extended model for resolving the problems of the existing metadata registry model. ISO/IEC 11179—Metadata registries is an international standard that has been developed to improve data interoperability. The metadata registry model provides a centralized metadata management and closed metadata verification scheme, and thus the use of the model compromises extensibility and usability. This paper analyzes the limitations of the existing metadata registry management scheme and proposes an extended metadata registry model to address the limitations. The extended model proposed in this paper enables a decentralized management and open participation. This paper also shows a possible implementation model to realize the proposed model, and a comparative evaluation and the advantages of the proposed model are described.
정동원(Dongwon Jeong) 한국컴퓨터정보학회 2014 한국컴퓨터정보학회 학술발표논문집 Vol.22 No.2
이 논문에서는 ISO/IEC JTC 1/SC 32/WG 2에서 개발한 메타데이터 관리 표준에 대한 검증 및 활용성 향상 방안을 제안한다. 메타데이터는 데이터의 데이터라고 정의하며 데이터를 표현하기 위한 다양한 데이터를 의미한다. 메타데이터는 데이터에 대한 해석 및 처리를 보다 용이하게 하기 위한 정보로서, 데이터에 대한 정확한 이해를 통해 데이터 불일치 문제를 해결하기 위해 이용된다. ISO/IEC JTC 1/SC 32는 데이터 교환 및 관리를 위한 표준을 개발하며 특히 WG 2는 메타데이터 관리를 위한 다양한 표준을 개발한다. WG 2에서 다양한 많은 표준을 개발하였으나 검증 및 활용성 측면에서 몇 가지 한계를 지닌다. 따라서 이 논문에서는 WG 2에서 개발한 표준에 대한 검증 및 활용성 향상을 위한 방안에 대하여 서술한다.
실내공간 저농도 CO<sub>2</sub> 포집을 위한 알칼리 함침 정전나노섬유 연구
정동원 ( Dongwon Jeong ),김상범 ( Sangbum Kim ),조영민 ( Youngmin Jo ) 한국공업화학회 2018 공업화학전망 Vol.21 No.4
Carbon nanofibers were electrospun from melamine-blended polyacrylonitrile (MACNFs), for improved indoor level CO<sub>2</sub> removal of the fibrous adsorbent. The dopant (melamine) was used to provide free and basic nitrogen functionalities, as well as to shorten the fabrication time of the nanofibers. Upon final CO<sub>2</sub> activation of the nanofibers, the specific surface area and microporosity were enhanced. As per chemical properties, the surface basicity was improved through the significant tethering of pyridone. The sample, MACNF-7 (10 mL polymer solution doped with 0.7 g melamine) provides the optimum doping ratio to achieve the highest CO<sub>2</sub> adsorption capacity of 3.15 mmol/g. This performance was based on simultaneous and just-adequate improvement of the microporosity (physical) and surface basicity (chemical) of the adsorbent. However, the selective adsorption of CO<sub>2</sub>, in a binary mixture with nitrogen, showed the predominance of the improved chemical properties over microporosity; the highest CO<sub>2</sub> selective capture (1.22 mmol/g) was exhibited by applying CO<sub>2</sub> : N<sub>2</sub> of 0.15 : 0.85., with the selectivity fold of 58.19 at 273 K. In a 5-fold regeneration test, a stable and robust performance was achieved throughout the five cycles.
블록체인 기반 자격증 관리 시스템의 정성적 평가 요소에 대한 통계 데이터 기반 성능 분석
정동원(Dongwon Jeong),이석훈(Sukhoon Lee) 한국정보기술학회 2020 한국정보기술학회논문지 Vol.18 No.9
This paper shows the quantitative evaluation results on the qualitative evaluation items of the blockchain-based certificate management system. The existing study provides the quantitative evaluation in the aspect of prompt authenticity verification. However, the study does not illustrate a quantitative evaluation of security, convenience, and reliability. This paper, therefore, describes the qualitative analysis and evaluation results in the aspect of the qualitative evaluation items. To achieve that, this paper collects a set of statistical data through a survey and analyzes the collected data. Also, the hypotheses are verified using the analysis results. This study quantitatively showed the contributions (security, convenience, and reliability) of the existing system.
정동원(Dongwon Jeong) 한국정보기술학회 2021 한국정보기술학회지 Vol.19 No.1
블록체인은 매우 광범위하게 사용되고 있으며, 지금도 그 활용에 대한 고민과 적용 방법에 대한 연구가 활발하게 진행되고 있다. 블록체인은 보안성과 함께 분산화 또는 탈중앙화, 투명성, 개방성 등의 특성을 지닌다. 이러한 강력한 보안성과 함께 다양한 특성으로 인해 거의 모든 분야에 적용이 가능하다. 이 논문에서는 이러한 블록체인의 특성을 이용하여 표준화 절차를 개선할 수 있는가에 대한 문제를 다루고자 한다. 표준화는 표준화된 절차에 따라 사회가 공감하는 수준에서 표준을 제정 또는 개정하는 과정이다. 이러한 절차를 거쳐 생산된 표준은 사회 시스템의 안전성, 효율화 등을 위한 사용된다. 그러나 현재의 표준화 절차가, 이러한 표준화 절차에 따라 생성된 표준이 대다수의 의견을 반영하고 많은 사용자들의 공감을 얻을 수 있는지에 대해서는 고민할 필요가 있다. 따라서 이 논문에서는 블록체인의 특성과 함께 표준화의 한계를 고찰하고 이를 개선할 방안에 대하여 기술한다.