http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
근사수평 반류성층 2상유동에서의 3차원 계면파의 구조측정
이상천 대한기계학회 1988 대한기계학회논문집 Vol.12 No.3
본 연구에서는 공기와 물을 사용한 근사수평 반류성층유동에서의 계면파 구조 를 측정하였다. 3차원파 영역내의 유동조건하에서 탐침접촉법을 이용하여 계면파의 액막분포도를 구하였으며 Gauss 모델과 비교분석하였다. 또 이 분포도에서 파의 구 조와 관련된 통계치, 즉 평균액막두께, 파진폭, 파고 교란강도등을 계산하여 유동조건 에 따른 경향을 분석하였다. 본 연구와 병행하여 계면전단응력과 계면마찰계수에 관 한 실험을 수행하였는데 이 결과와 계면파 구조와의 상호연관성도 고찰하였다. Structures of interfacial waves in nearly-horizontal countercurrent stratified air-water flow have been measured by means of a needle contact method. Based upon a statistical analysis for the liquid film distribution, statistical properties of the waves such as mean film thickness, mean wave amplitude and rms value of the wave fluctuation have been calculated. The results show that the film distribution can be described by a Gaussian probability density function for the three-dimensional wave regime. It is also indicated that the mean film thick ness and the rms value of the wave fluctuation increase as gas and liquid flow rates are increased in countercurrent two-phase flow. The dimensionless intensity of the wave fluctuation may be regarded as a function of the Froude number and the dimensionless mean film thickness.
근사수평 반류성층 2상유동에서의 계면전단응력 및 마찰계수
이상천,이원석 대한기계학회 1988 대한기계학회논문집 Vol.12 No.1
본 연구에서는 공기와 물을 매질로 사용하여 3차원 계면파가 존재하는 근사수평 반류성층유동에서의 계면전단응력과 마찰계수를 결정하였다. 기상과 액상의 유량조건에 따라 3차원 계면파의 특성을 needle contact법에 의하여 측정 하였으며, 기상의 압력강하와 속도분포를 구하여 계면전단응력을 구하였다. 또 공학적인 응용을 위하여 3차원과 영역에서의 계면마찰계수에 관한 실험식을 개발하였다. 그리고 거칠은 고체표면에서의 마찰계수를 표현한 Nikuradse식을 이용하여 계면의 등가조도(equivalent roughness)를 계산하였으며 이것을 계면의 파고교란강도와 비교분석하여 계면전단응력에 영향을 미치는 인자들을 규명하였다. Interfacial shear stresses have been determined for countercurrent stratified flow of air and water in a nearly-horizontal rectangular channel, based upon measurements of pressure drop, gas velocity profiles and mean film thickness. A dimensionless correlation for the interfacial friction factor has been developed as a function of the gas and liquid Reynolds numbers. Equivalent surface roughnesses for the interfacial friction factor have been calculated using the Nikuradse correlation and have been compared with the intensity of the wave height fluctuation on the interface. The results show that the interfacial shear stress is mainly affected by turbulent mixing near the interface due to the wave motion rather than by the roughened surface.
오리피스 순간압력강하의 통계해석을 통한 수평 2상유동양식의 결정
이상천,이정표,김중엽 대한기계학회 1987 대한기계학회논문집 Vol.11 No.5
본 연구에서는 이러한 개념을 바탕으로 오리피스 내의 국소 압력강하치의 통 계적 해석을 통한 유동양식의 판별을 시도하였다. 수평관내 물과 공기를 매질로 2상 유동을 형성하여 각 유동양식에 따른 압력강하치의 확률밀도함수를 구하였으며 순간압 력강하의 통계치를 분석하였다.본 연구에서 다룬 유동양식은 기포유동, 플러그(pl- ug)유동, 슬러그(slug)유동, 성층(stratified)유동 등이며 천이영역에 대한 실험자료 도 포함하였다. 끝으로 이러한 유동양식 판별법을 사용하여 유동선도를 완성하였으 며 다른 선도와 비교분석하였다. A new method is proposed to identify two-phase flow regimes in horizontal gas-liquid flow, based upon a statistical analysis of instantaneous pressure drop curves at an orifice. The probability density functions of the curves indicate distinct patterns depending upon the two-phase flow regime. The transition region also could be identified by the distribution shape of the probability density function. The statistical properties of the pressure drop are analyzed for various flow regimes and transitions. Finally, the data of flow patterns determined by the proposed method are compared with the flow pattern maps suggested by other investigators.
이상천,김재명,박한규,Lee, Sang-Cheon,Kim, Jae-Myeong,Park, Han-Gyu 한국전자통신연구원 1986 전자통신 Vol.8 No.4
본 연구에서는 이동통신 시스팀에서 채널 모델의 시뮬레이션을 수행하는데 사용 가능한 알고리즘을 개발하였으며 이동체 속도에 따라 그 특성을 분석하였다. 이동통신 채널에서는 다중 경로에 의하여 레일리 페이딩 채널이 구성되어 지는데 이의 알고리즘 개발을 위하여 실제 제작 구현이 용이한 위상 변조신호 합성 방법과 shaping 필터를 이용하는 방법을 채택하였다. 개발 알고리즘을 분석한 결과 제시한 두 모델 모두가 채널 시뮬레이션을 위하여 사용가능함을 확인하였으며 특히 레일리 분포 특성에서는 위상변조 신호 합성방식이 이론치와 더욱 유사됨을 알 수 있었다.
이상천,이정표,김중엽 대한기계학회 1990 대한기계학회논문집 Vol.14 No.5
본 연구에서는 이러한 개념을 확장하여 직경이 26nm와 38nm인 두 개의 수평관 내 기액 2상유동에서 오리피스의 차압교란치의 확률밀도함수, 자기상관함수와 파워 스 펙트럼 밀도함수를 구하여 유동양식에 따른 이 들 통계치의 특성을 구명하였다. 본 연구에서 다룬 유동양식은 기포, 플러그, 슬러그, 성층, 파상, 환상, pseudo-slug 유 동이다. 이 결과 차압교란치의 통계적 해석을 통한 유동양식 판별법이 매우 유용하 다는 사실을 밝혔으며, 또 본 판별법을 관내 압력강하치의 통계적 해석을 통하여 유동 양식을 구분한 타 연구자들의 방법과 비교 분석하였다. Characteristics of flow patterns in horizontal gas-liquid two-phase flow for two different sizes of pipe were investigated based upon a statistical analysis of differential pressure fluctuations at an orifice. The probability density function and the power spectral density function of the traces indicate peculiar shapes depending upon the two-phase flow regime. Mixed and separated flows also could be identified by the autocorrelation function. The transition region from separated flow to mixed flow also could be identified by these statistical properties. The experimental data determined by this method were compared with the flow pattern maps suggested by other investigators. The result indicates that the statistical characteristics of differential pressure fluctuations at orifices may be a useful tool for identifying flow patterns of horizontal gas-liquid two-phase flow.