http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한영진(Y. J. Han),최만호(M. H. Choi),김명진(M. J. Kim),이해철(H. C. Lee),김효윤(H. Y. Kim),최우천(W. C. Choi) 한국진공학회(ASCT) 1994 Applied Science and Convergence Technology Vol.3 No.4
설계변경된 sector 챔버를 제작하고, 저장링 챔버로서 성능을 알기 위하여 각종 진공실험을 하였다. 가스방출률은 낮은 10^(-13) Torr.1/sec/㎠이고 누설률은 1×10^(-10) Torr.1/sec이하이며 2회 bakeout과 NEG활성화후 얻어진 최종진공도는 낮은 10^(-11) Torr이었다. 이러한 결과는 저장링 sector챔버의 진공요구조건을 충분히 만족시킨다. A sector chamber refined design has been fabricated and tested vacuum in order to examine performance of sector chamber of storage ring. The outgassing rate is low 10^(-13) Torr. l/sec/㎠. The leak rate is less than 1×10^(-10)Torr.l/sec and the ultimate pressure is achieved low 10^(-11) Torr after twice bakeout and NEG activation. These results satisfy the terms desired of vacuum for the PLS storage ring chamber.
최만호(M. H. Choi),정상수(S. S. Jeong),김효윤(H. Y. Kim),김명진(M. J. Kim),이해철(H. C. Lee),한영진(Y. J. Han),최우천(W. C. Choi) 한국진공학회(ASCT) 1993 Applied Science and Convergence Technology Vol.2 No.3
본 논문은 포항가속기에서 건설 중인 진공 chamber의 용접에 관한 것이다. 저장링에 전자빔을 5시간 이상 저장하기 위하여 10^(-10)torr 이하로 진공도를 유지하도록 설계되어 있기 때문에 초고진공에 적합한 TIG 용접(tungsten inert gas welding)을 하였다. 진공 chamber는 Al 5083-H321이며 flange의 재질은 Al 2219-T852이다. Sector chamber Ⅰ, Ⅱ의 총 용접 길이는 각각 27m, 37m이며 진공에 유해한 균열과 virtual leak가 생기지 않도록 하는 용접조건 등을 선정하였다. In order to maintain a beam life time of more than 5 hours, the PLS vacuum chamber should be in the pressure of 10^(-10)torr. Thus welding of The PLS chambers should be free of cracks and virtual leaks. Important things related to chamber closed welding and Al-flange welding and described such as welding preparation, welding condition, leak test and welding repair.
김창균(C. K. Kim),길계환(K. H. Kil),최우천(W. C. Choi),박수용(S. Y. Park) 한국진공학회(ASCT) 1992 Applied Science and Convergence Technology Vol.1 No.1
포항 가속기 연구소는 2 GeV 규모의 방사광 가속기를 제작하고 있다. 가속기 저장링에 저장되는 전자빔의 수명을 5시간 이상 보장하기 위하여 저장링 진공 chamber내의 평균압력을 nano Torr 이하로 유지할 계획이다. 진공 Chamber는 상하판으로 구성되어 있고 각각은 따로 기계 가공되어 용접으로 접합된다. 진공 chamber 재료는 Al 5083-H321이다. pumping system으로는 lumped NEG와 ion pump의 combination pump를 가스발생이 심한 photon stop 밑에 부착하고 ion pump를 따로 설치한다. 진공 chamber 시제품을 사용하여 여러 종류의 test를 한 후에 본제품 설계를 수정 보완할 계획이다. The Pohang Accelerator Lab is constructing a 2 GeV synchrotron radiation source. In order to achieve a beam lifetime of 5 hours or more, the average pressure in the vacuum chamber will be kept in the nano Torr range. Each chamber consists of a top and a bottom piece, which are machined separately and welded together. The chamber material is Al 5083-H321. The pumping system has nine sets of lumped NEGs in tandem with ion pumps installed beneath photon stops, and six ion pumps per superperiod. A prototype chamber will be machined by February 1992. After various tests with the prototype chamber, the vacuum chamber design will be refined.