http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
DBI 구조의 전자식 안정기를 이용한 70W CDM 램프용 조광제어 시스템 개발
최왕섭,유진완,박종연,Choe, Wang-Seop,Yoo, Jin-Wan,Park, Chong-Yun 강원대학교 산업기술연구소 2011 産業技術硏究 Vol.31 No.2
Ceramic metal halide lamps have been widely used due to long lifetime, high luminous efficiency and good colour rendering. In this paper, we developed dimming control system of electronic ballast for 70W ceramic metal halide lamp by using 1-10V interface. The proposed electronic ballast is consists of EMI filter, Full-wave rectifier, Active PFC, DBI(Dual Buck Inverter), Igniter and control circuit.It enables to supply both low-frequency rectangular wave voltage and current to the lamp by using DBI(Dual Bcuk Inverter) structure. By using 1-10V interface, the system that able to dimming the lamp is demonstrated by P-spice simulation and experimental results.
DBI 구조의 전자식 안정기를 이용한 70W CDM 램프용 조광제어 시스템 개발
최왕섭(Choe, Wang-Seop),유진완(Yoo, Jin-Wan),박종연(Park, Chong-Yun) 강원대학교 산업기술연구소 2011 産業技術硏究 Vol.31 No.1
Ceramic metal halide lamps have been widely used due to long lifetime, high luminous efficiency and good colour rendering. In this paper, we developed dimming control system of electronic ballast for 70W ceramic metal halide lamp by using 1-10V interface. The proposed electronic ballast is consists of EMI filter, Full-wave rectifier, Active PFC, DBI(Dual Buck Inverter), Igniter and control circuit.It enables to supply both low-frequency rectangular wave voltage and current to the lamp by using DBI(Dual Bcuk Inverter) structure. By using 1-10V interface, the system that able to dimming the lamp is demonstrated by P-spice simulation and experimental results.
이규민(Kyu-Min Lee),최왕섭(Wang-Seop Choe),박종연(Chong-Yun Park) 전력전자학회 2010 전력전자학술대회 논문집 Vol.2010 No.11
최근 반도체 산업의 비약적 발전으로 고출력 LED 광원 시스템 개발이 확대되고 있다. 그 중 무대조명 분야는 색 연출의 필요성으로 넓은 조도제어(Dimming) 범위가 필수적이다. 본 논문에서는 방송장비의 높은 센싱 속도로 인하여 화면에 생기는 빛의 떨림 현상 제거와 0~100%의 넓은 조도제어 범위를 구현하기 위해 Analog 조도제어와 PWM 조도제어를 결합한 조도제어 방법을 제안하였으며, 이를 위한 회로를 설계하고, 이를 실험적으로 검증하였다.
박종연(Chong-Yun Park),최왕섭(Wang-Seop Choe),이규민(Kyu-Min Lee) 전력전자학회 2010 전력전자학술대회 논문집 Vol.2010 No.7
Dual Buck Inverter 구조를 갖는 35W 세라믹 MHL용 전자식 안정기의 제어회로를 설계하였다. 제어회로는 크게 2가지로 나눌 수 있는데 PFC IC를 이용하여 Inverter의 전압과 전류를 센싱하여 80㎑로 Inverter를 구동하기 위한 제어부분과 시간의 경과에 따른 PFC의 출력 전압 제어, Ignition Pulse 제어 및 무부하 보호, 램프의 점등 상태에 따른 Inverter 구동 주파수 제어부분으로 구성되어 있다. 본 논문은 마이크로 컨트롤러(ATmega8)를 이용하여 시간의 경과에 따른 안정기의 제어부분에 대해 설명하고 이를 실험을 통해 검증하였다.
DBI 구조를 이용한 35[W] 세라믹 메탈 할라이드 램프용 전자식 안정기의 설계
박종연(Chong-Yun Park),최왕섭(Wang-Seop Choe) 한국조명·전기설비학회 2010 조명·전기설비학회논문지 Vol.24 No.9
Ceramic metal halide lamps have been widely used due to long lifetime, high luminous efficiency and good colour rendering. 35[W] ceramic metal halide lamps has very different characteristics between ignition state and steady state. The developed electronic ballast is satisfied to both ignition state and steady state characteristics by using a micro-controller. The proposed electronic ballast is consists of EMI filter, Full-wave rectifier, Active PFC, DBI(Dual Buck Inverter), Igniter and control circuit. It enables to supply both low-frequency rectangular wave voltage and current to the lamp by using DBI(Dual Bcuk Inverter) structure.
최현희(Hyeon-Hui Choe),최왕섭(Wang-Seop Choi),박종연(Chong-Yun Park) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
Dual Buck Inverter구조를 가지는 70W CDM 램프용 전자식 안정기의 제어기를 설계하였다. 전자식 안정기는 EMI filter, Active PFC, Dual Buck Inverter, Igniter, SMPS로 구성 된다. 제어기는 크게 2개로 구분 할 수 있다. MC33262를 이용하여 Inverter의 전압, 전류를 센싱 받아 70㎑의 Zero Voltage Switching을 위한 제어기와 시간의 경과에 따라 PFC의 출력 전압 제어, Ignition Pulse 제어 및 무부하 보호를 위한 제어기로 구성되어 있다. 본 논문은 ATmega8을 이용하여 제어기를 설계하였고 실험으로 시간의 경광 따른 안정기의 제어가 안정적인 동작을 하고 있음을 증명하였다.
박종연,최왕섭 江原大學校 産業技術硏究所 2010 産業技術硏究 Vol.30 No.A
We described the operating principles of two different type of igniters for lightning of Ceramic Metal Halide Lamp(CMHL) and also provide some useful comparisons. One is for magnetic ballast, the other one is for electronic ballast which operates lamp by low-frequency square-waveform. Ignition voltage of lamp depends on the structure of igniter, such as the length and electrical characteristics of cable, which make troubles for ignition in real sites. Therefore, we measured and analyzed ignition voltages from igniters which are used in magnetic and electronic ballast in cables at a distance of 5 meters between a lamp and a igniter to suggests an applicable solution in real sites.