http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
노후화된 교량 바닥판 대체용 복합재료 교량 바닥판의 거동에 관한 실험적 연구
지효선,손병직,장석윤,Ji, Hyo Seon,Son, Byung Jik,Chang, Suk Yoon 한국강구조학회 2001 韓國鋼構造學會 論文集 Vol.13 No.6
본 연구에서는 노후화된 교량 대체용으로 복합재료 교량 바닥판의 거동에 대하여 실험적인 방법으로 조사하였다. 바닥판의 성능평가와 관련하여 총 5개의 시험체를 1/10 축소모형 시험체로 제작하고 실험을 실시하였다. 3개의 시험체는 강성을 확보키 위해 알루미늄 코아를 갖는 샌드위치 상부플랜지와 라미네이트(Laminate) 상부플랜지 형식 2개, 총 5개의 시험체를 제작 하였다. 바닥판 구성요소는 유리섬유와 에폭시재료(glass fiber/epoxy)를 사용하여 제작하였다. 시험체의 최대내력, 강성 및 변형성능에 대한 결과를 요약하였다. 또한 실험결과의 타당성을 검증하고자 유한요소해석의 결과와 비교하였다. The behavior of composite materials bridge decks for use in deteriorated bridge decks replacement are investigated experimentally in this study. As for the performance evaluation of bridge decks, experimental studies on the 5 test specimens with 1/10 scale of full size were carried out. Three specimens were fabricated from sandwich upper flange and two specimens were fabricated from laminated upper flange. The constituents of bridge decks were glass fiber performs and epoxy resin. The experimental results, i.e., the maximum strength stiffness, stiffness, and deformation capacity, were summarized. The results of the finite element analysis were compared with the experimental results for the verification of validity.
노후교량 바닥판 대체용 Modular GFRP 바닥판 거동에 관한 실험 연구
지효선,천경식,Ji, Hyo-Seon,Chunk, Kyung-Sik 한국복합신소재구조학회 2010 복합신소재구조학회논문집 Vol.1 No.2
본 연구에서는 노후교량 바닥판 대체용으로 단품(Modular) GFRP 바닥판 구조에 대한 거동분석을 실험을 통행 실시하였다. 그 바닥판의 성능평가로서 축소모형(1/5)의 시험편 3개에 대한 실험적 연구를 수행하였다. 시험편은 박스튜브를 갖는 샌드위치 판이다. 교량바닥판의 구성재료는 유리섬유와 에폭시 레진이다. 모든 시험편에 대한 실험결과로서 최대강도, 강성 및 변형능력으로 나타내었다. 실험적 결과의 타당성을 검증하기 위해 유한요소해석을 하여 비교하였다. The behaviour of Modular GFRP(Glass Fiber Reinforced Polymers) decks for use in deteriorated bridge decks replacement are investigated experimentally in this study. As for the performance evaluation of bridge decks, experimental studies on the 3 test specimens with 1/5 scale of full size were carried out. Three specimens were sandwich plates with box tube cores. The constituents of bridge decks were glass fiber preforms and epoxy resin. The experimental results of all the specimens were summarized for maximum strength, stiffness and deformation capacity. A finite element analyses were compared to verify validity of experimental results.
하이브리드 GFRP-강재 심재를 갖는 복합샌드위치 교량바닥판의 정적거동에 관한 실험 연구
지효선,천경식,박대용,손병직,Ji, Hyo-Seon,Chun, Kyung-Sik,Park, Dae-Yong,Son, Byung-Jik 한국복합신소재구조학회 2011 복합신소재구조학회논문집 Vol.2 No.3
본 논문은 노후교량바닥판 대체용으로서 하이브리드 GFRP-강재 바닥판의 휨거동을 구조적 거동특성을 기술하고 있다. 하이브리드 GFRP-강재 바닥판의 구조적 특성을 조사하기 위해 정적하중의 실험적 연구를 수행하였다. 하이브리드 바닥판의 파괴모드는 초기항복을 지나서 연성거동을 나타내었다. 결과는 유한요소프로그램 ANSYS의 값과 비교하였다. 제안된 하이브리드 바닥판이 교량적용에 유용함을 확인하였다. 하이브리드 바닥판의 두께는 유사한 휨 강성을 갖는 완전복합신소재 바닥판께와 비교하였을 때 감소될 수 있었다. This paper presents the flexural behavior of a hybrid Glass Fiber-Reinforced Polymer(GFRP)-steel decks for use in deteriorated bridge decks replacement. Static load tests were conducted to investigate the structural characteristics of the hybrid FRP-steel deck. The tested deck panel satisfied the design criteria. The failure mode of the hybrid deck was demonstrated ductility with deformation beyond initial yielding. The responses were compared with the ANSYS finite element predictions. It was found that the presented hybrid deck was efficient for use in bridges. The thickness of the hybrid deck may be decreased when compared to that of the all FRP deck with similar flexural rigidity.
Bending Analysis of Anisotropic Sandwich Plates with Multi-layered Laminated Composite faces
지효선,Ji, Hyo-Seon Korean Society for Advanced Composite Structures 2012 복합신소재학회논문집 Vol.3 No.4
This study presents a governing equations of bending behavior of anisotropic sandwich plates with multi-layered laminated composite faces. Based on zig-zag models for through thickness deformations, the shear deformation of composite faces is included. All edges of plate are assumed to be simply supported. Results of the bending analysis under lateral loads are presented for the influence of various lay up sequences of antisymmetric angle-ply laminated faces. The accuracy of the approach is ascertained by comparing solutions from the sandwich plates theory with composite faces to the laminated plates theory. Since the present analysis considers the bending stiffness of the core and also the transverse shear deformations of the laminated faces, the proposed method showed higher than that calculated according to the general laminated plates theory. The information presented might be useful to design sandwich plates structure with polymer matrix composite faces.