http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
4-Post Road Simulator 를 이용한 농용 트랙터의 유연 다물체 동역학 해석
박지수,이강욱,조종윤,윤지원,신재윤,Park, Ji Soo,Lee, Kang Wook,Cho, Chong Youn,Yoon, Ji Won,Shin, Jai Yoon 대한기계학회 2015 대한기계학회 논문집. Transactions of the KSME. C, 산업기술과 혁신 Vol.3 No.2
Agricultural tractors are utilized on rough road such as rice paddy field. Therefore, static and dynamic load should be considered when simulating structural analysis with finite element analysis (FEA). But it consumes a lot of time and effort to measure dynamic load because of difficulty and complexity in modeling various field working load conditions and kinematics of machinery. In this paper, to reduce the efforts, 4-post road simulator is developed for agricultural tractor like modeling commercial vehicle. In proving ground test in our facility, I measured acceleration of front/rare axle and strain of body frame to validate input loads. The acceleration is used for defining input loads. And strain is validated with dynamics analysis including mode superposition method. As a result, I was able to calculate 4-post input road profiles, which represent similar proving ground profile with good reliability. 농용 트랙터는 일반적인 도로 주행이 아닌 논 또는 밭과 같은 험지에서 작업용으로 사용한다. 때문에 정적 하중 뿐만 아니라 동적 하중이 고려된 구조 해석이 진행되어야 한다. 하지만 동적 입력 하중을 계산하기 위해서는 다양한 작업기와 하중조건을 모사해야 하기에 실제 측정에 많은 시간과 노력이 소요된다. 이러한 노력들을 줄이기 위해서 본 연구에서는 상용 자동차와 동일하게 농용 트랙터를 위한 4 축 도로하중 시뮬레이터(4-Post Road Simulator) 모델을 개발하였다. 입력하중을 검증하기 위해 사내 험로 시험장에서 차축의 가속도 값과 바디프레임의 변형률(strain)을 측정하였다. 가속도 값은 동역학 모델의 입력 하중으로 사용하고 모드 중첩 법을 포함한 동역학 해석을 수행하여 변형률을 검증하였다. 이를 통해 험로 프로파일과 유사한 거동을 나타내는 4 축 도로하중을 구할 수 있었으며 신뢰성을 검증하였다.
압전 마이크로캔틸레버 질량센서를 이용한 정량적 알파태아단백 검출
이상규(Sangkyu Lee),조종윤(Jongyun Cho),이열호(Yeolho Lee),전상민(Sangmin Jeon),차형준(Hyung Joon Cha),문원규(Wonkyu Moon) 한국비파괴검사학회 2011 한국비파괴검사학회지 Vol.31 No.5
비표지 방식의 압전 마이크로캔틸레버 질량센서를 이용하여 간세포암의 혈청표지물질인 알파태아 단백(alpha fetoprotein, AFP)을 정상 농도인 10 ng/ml까지 정량적으로 검출하였다. 압전 마이크로캔틸레버 질량센서는 캔틸레버의 질량변화에 의하여 센서의 공진주파수가 변화되는 원리를 이용하여 센서에 붙은 물질의 질량을 측정하며, 센서의 공진주파수는 컨덕턴스 스펙트럼을 이용하여 전기적으로 측정한다. 제작된 센서는 공진 주파수가 약 1.34 ㎒, 질량 민감도가 약 175 ㎐z/pg이며 단백질이 붙을 때 캔틸레버의 표면 스트레스 변화에 대한 센서의 공진 주파수 변화를 줄일 수 있도록 설계되어 질량센서로써 신뢰도를 높였다. ‘Dipand dry’ 방법으로 캔틸레버의 프로브 영역을 시약과 반응시켜서 AFP 항체를 고정화하고 AFP 항원을 검출하는 실험을 수행하였다. 10 ng/ml과 50 ng/ml농도의 항원에서 10분간 항원-항체 면역반응을 시켰을 때 센서에 검출된 항원의 질량이 각각 6.02 pg과 10.67 pg이다. Alpha fetoprotein(AFP), which is serological marker for hepatocellular carcinoma, was quantitatively measured by its normal concentration, 10 ng/ml, with a label-free piezoelectric microcantilever mass sensor. The principle of detection is based on changes in the resonant frequency of the piezoelectric microcantilever before and after target molecules are attached to it, and its resonant frequency is measured electrically using a conductance spectrum. The resonant frequency of the developed sensor is approximately 1.34 ㎒ and the mass sensitivity is approximately 175 ㎐/pg. The sensor has high reliability as mass sensor by reducing the effect of surface stress on resonant frequency due to attached proteins. ‘Dip and dry’ technique was used to react the sensor with reagents for immobilizing AFP antibody on the sensor and detecting AFP antigen. The measured mass of the detected AFP antigen was 6.02 pg at the concentration of 10 ng/ml, and 10.67 pg at 50 ng/ml when the immunoreaction time was 10 min.