http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Laguerre 다항식을 이용한 전송 선로의 시간 영역 BLT 방정식 해석
이윤주,정용식,소준호,신진우,천창율,이병제,Lee, Youn-Ju,Chung, Young-Seek,So, Joon-Ho,Shin, Jin-Wo,Cheon, Chang-Yul,Lee, Byung-Je 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.9
본 논문은 Laguerre 다항식을 이용하여 BLT 방정식을 시간 영역에서 해석하는 방법을 제안한다. 본 논문은 Laguerre 다항식의 재귀적 성질과 미분 및 적분 등의 특성을 이용하여 시간 영역에서의 전송 선로의 BLT 방정식해를 구하였다. 위의 해석 방법을 저항과 커패시터가 부하로 있는 2선 전송 선로에 적용하여, 외부에서 평면파펄스가 인가되었을 때의 각 전송 선로 종단에서의 전압의 파형을 주파수 영역의 BLT 결과를 IFFT한 값과 비교함으로 정확성을 확인하였다. In this paper, we propose the method to solve the BLT equations using Laguerre polynomials in time domain. The solution of BLT equations is obtained by recursive, differential and integral properties of Laguerre polynomials. The verification of the proposed method is tested by applying it to the two-wired transmission line with resistors and capacitors, which is illuminated by the electromagnetic plane wave pulse. And the result is compared with the corresponding transient responses obtained from inverse fast Fourier transform(IFFT) of the frequency domain solutions of BLT equations.
이정훈,정용식,소준호,김준연,장원,Lee Jung-Hoon,Chung Young-Seek,So Joon-Ho,Kim Junyeon,Jang Won 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.2
본 논문에서는 시간 영역 유한차분법(FDTD: Finite-Difference Time-Domain Method)과 설계 민감도법(design sensitivity analysis)을 이용하여 미지의 유전체 산란체(dielectric scatterer) 복원을 위한 역산란 문제(inverse scattering)의 새로운 해석 기법을 제안하였다. 본 연구에서는 빠른 수렴을 위하여 목적 함수의 도함수를 이용한 설계 민감도법을 도입하였고, 시간 영역 유한차분법으로부터 직접 설계 민감도 수식을 도출하였다. 해석의 효율성을 위하여 보조 변수법(adjoint variable method)을 도입하여 보조 변수 방정식을 도출하고 최적화 알고리듬으로 최대 경사도법을 이용하여 반복적인 추정을 통하여 미지의 유전체를 복원하였다. 본 연구의 타당성의 보이기 위하여 2차원 $TM^z$에서의 유전체 복원 사례를 제시한다. In this paper, we proposed a new algorithm of the inverse scattering for the reconstruction of unknown dielectric scatterers using the finite-difference time-domain method and the design sensitivity analysis. We introduced the design sensitivity analysis based on the gradient information for the fast convergence of the reconstruction. By introducing the adjoint variable method for the efficient calculation, we derived the adjoint variable equation. As an optimal algorithm, we used the steepest descent method and reconstructed the dielectric targets using the iterative estimation. To verify our algorithm, we will show the numerical examples for the two-dimensional $TM^2$ cases.
Matrix Pencil Method 기반의 부엽차단기 성능분석 연구
여민영(Min-Young Yeo),이강인(Kang-In Lee),양훈기(Hoon-Gee Yang),박규철(Gyu-Churl Park),정용식(Young-Seek Chung) 대한전기학회 2017 전기학회논문지 Vol.66 No.8
In this paper, we propose a new algorithm for the performance analysis of the sidelobe blanker (SLB) in radar system, which is based on the matrix pencil method (MPM). In general, the SLB in radar is composed of the main antenna, the auxiliary antenna, and the processing unit. The auxiliary antenna with wide beamwidth receives interference signals such as jamming or clutter signals. The main antenna with high gain receives the target signal in the main beam and the interference signals in the sidelobe. In this paper the Swerling model is used as the target echo signal by considering a probabilistic radar cross section (RCS) of the target. To estimate the SLB performance it needs to calculate the probability of target detection and the probability of blanking the interference by using the signals received from the main and auxiliary antennas. The detection probability and the blanking probability include multiple summations of infinite series with infinite integrations, of which convergence rate is very slow. Increase of summation range to improve the calculation accuracy may lead to an overflow error in computer simulations. In this paper, to resolve the above problems, we used the MPM to calculate a summation of infinite series and improved the calculation accuracy and the convergence rate.
능동 상쇄 회로를 이용한 곡면 알루미늄 판의 Backscatter Field 감쇄 연구
김준환(Junhwan Kim),정용식(Young-Seek Chung),천창율(Changyul Cheon) 대한전기학회 2015 전기학회논문지 Vol.64 No.2
This paper propose a method to reduce the backscatter field of the curved aluminum plate using the cancellation system. The cancellation circuit is composed of a circulator, a LNA(Low Noise Amplifier), a VGA(Variable Gain Amplifier) and two phase shifters. Prior to experiment, we performed simulations to confirm the possibility using FDTD(Finite Difference Time Domain) simulator. We confirmed that the backscatter field could be reduced by the cancellation circuit when we changed the appropriate gain and phase. Finally, we performed an experiment to verify the performance of the cancellation circuit.
EMI/EMC 실험을 위한 Four-wires을 이용한 안테나 설계
강성원,김준규,소준호,정용식,천창율,Gang, Sung-Won,Kim, Jun-Kyu,So, Jun-Ho,Chung, Young-Seek,Cheon, Chang-Yul 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.6
In this paper, a Four-wired antenna was designed and manufactured using Four-wires in order to perform EMI/EMC experiments. As compared with a TEM cell, the feature of the Four-wired antenna has simple installment with broadband balun, a Four-wired antenna, and loading resistances in an anechoic chamber. And the E-field polarization of antenna can be easily changed. Without the limitation of space, EMI/EMC experimental environment could be built within the anechoic chamber with the moderate cost. In S, C, and X-bands, the manufactured antenna was able to make an experiment on EMI/EMC with the DUT which has the quiet zone of the height, width, length equal to about 10 cm. 본 논문은 Four-wired 안테나를 이용하여 EMI/EMC 실험을 할 수 있는 안테나를 설계, 제작하였다. 일반 TEM-cell과 비교하여 이번 논문에서 설계, 제작하는 안테나의 특징은 무반향실에 broadband balun, Four-wired 안테나와 Loading resistances을 쉽게 설치하여, E-field polarization을 선택 할 수 있다는 점이다. 그리고 공간의 제약없이 기존의 무반향실을 이용하여 적은 비용으로 EMI/EMC 실험 환경을 구축할 수 있다. 제작된 안테나는 S, C 및 X-band에서 EMI/EMC 실험을 할 수 있는 가로, 세로, 높이 모두 약 10 cm 정도의 크기를 갖는 quiet zone을 얻을 수 있었다.