http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Lattice Boltzmann 방법을 이용한 미소채널 내에서의 유동에 대한 수치적 연구
정수인(Sooin Jeong),김귀순(Kui-soon Kim),강범수(Beom-soo Kang) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.6
In this paper, the lattice Boltzmann equation method (LBM), a particle-based approach, is applied to analyze the two-dimensional flow characteristics of pressure driven micro-channels categorized to slip-flow regime. The results of current study are compared with those obtained analytically and experimentally. It is demonstrated that the lattice Boltzmann method can capture the fundamental behaviors in micro-channel flow, including velocity slip, nonlinear pressure drop along the channel and mass flow rate variation with Knudsen number. The effects of Knudsen number and pressure ratio in the micro-channel flow.
로터 블레이드 스윕을 적용한 부분흡입형 축류 초음속 터빈의 성능특성에 대한 수치적 연구
정수인(Sooin Jeong),김귀순(Kuisoon Kim) 한국추진공학회 2013 한국추진공학회지 Vol.17 No.3
In this study, we performed three-dimensional CFD analysis to investigate the effect of the rotor blade sweep of a partial admission supersonic turbine on the stage performance and the flow field. The computations are conducted for three different sweep cases, No sweep(NSW), Backward sweep(BSW), and Forward sweep(FSW), using flow analysis program, FLUENT 6.3 Parallel. The results of the BSW model show reduced mass flow rates of tip leakage and increased total-to-static efficiency. The strength of leading edge bow shock was decreased a little with BSW model. And the BSW model also shows a good performance around the hub region compared to other models.
노즐-로터 축간극 거리에 따른 초음속 터빈 내의 성능특성에 대한 수치적 연구
정수인(Sooin Jeong),최병익(Byoung-ik Choi),김귀순(Kuisoon Kim) 한국추진공학회 2015 한국추진공학회지 Vol.19 No.3
In this study, 3-dimensional URANS simulation was performed to analyze the effect of the nozzle-rotor axial gap spacing of a supersonic impulse turbine on turbine performance. The computations were conducted for four different axial gap cases corresponding to about 6%, 10%, 20% and 30% of the blade height, respectively. The results show a good agreement with previous studies and the turbine efficiency decreases drastically in certain range. It is examined that the turbine performance characteristics could change depending on the influence of leading edge shock to the nozzle outlet. It is also found that the entropy rise distributions along the span differ from each other.
스윕 각이 적용된 부분 흡입형 초음속 축류 터빈의 정상, 비정상 공력 특성에 관한 수치적 연구
정수인(Sooin Jeong),김귀순(Kuisoon Kim) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.5
본 논문에서는 부분 흡입형 초음속 터빈의 로터 블레이드에 ±15°의 스윕 각도를 적용하여 그에 의한 효과와 공력 특성을 살펴보기 위해 정상상태 유동해석과 비정상상태 유동해석을 동시에 수행하고 그 결과를 비교해 보았다. 3차원 Navier-Stokes 유동해석에는 상용 코드인 FLUENT 6.3 Parallel을 사용하였다. 모든 계산 케이스들에서 정상상태 유동해석에 비해 비정상상태의 경우가 손실이 더욱 크게 나오는 결과를 나타내었다. 후방스윕(BSW)모델은 기준모델(NSW)에 비해 팁 간극으로 빠져나가는 누설 손실량을 줄이는데 큰 효과가 있었고 비정상상태 유동 해석에서는 로터 출구면 정효율의 증가현상이 더욱 뚜렷하게 나타났다. Steady and unsteady three-dimensional RANS simulations have been performed on partial admission supersonic axial turbine having backward/forward sweep angles(±15°) and the results are compared with each other. The objective of this paper is to study the effect of unsteadiness on turbine flow characteristics and performances. The all results indicated that the losses of unsteady simulations were greater than those of steady cases. It was also shown that BSW model give the effect on the reducing of mass flow rates of tip leakage. In unsteady simulation, the increase of t-to-s efficiency at Rotor Out plane was observed more clearly.
정수인(Sooin Jeong),최병익(Byoungik Choi),이향기(Hanggi Lee),김귀순(Kuisoon Kim) 한국추진공학회 2017 한국추진공학회 학술대회논문집 Vol.2017 No.5
액체 로켓 엔진의 터보펌프를 구동하는 고압 초음속 충동형 터빈의 로터 블레이드에 3차원 설계요소를 적용하여 성능을 개선하기 위한 연구를 진행하고 있다. 본 논문에서는 기존 설계된 터보펌프용 터빈의 로터 블레이드 형상을 바탕으로 로터 블레이드에 스윕(sweep)과 상반각(dihedral) 등과 같은 중첩선(stacking line) 변화를 통한 3차원 형상을 적용하고 CFD를 이용한 3차원 유동 해석을 수행한 후, 각각의 설계 요소에 대한 터빈성능 특성 변화를 면밀히 검토하고 그 결과를 정리하였다. We are working on improving the performance by applying the three-dimensional design element to the rotor blades of high pressure supersonic impulse turbine that drives turbo pump of liquid rocket engine. In this paper, based on the shape of a rotor blade of a turbopump turbine designed in the past, a three-dimensional shape is applied to a rotor blade through a stacking line change such as sweep and dihedral. After performing the flow analysis, the changes in the turbine performance characteristics for each design element were carefully examined and the results were summarized.
비정상 해석을 이용한 노즐-로터 축간극 거리에 따른 초음속 터빈 내의 성능특성 연구
정수인(Sooin Jeong),최병익(Byoung-ik Choi),김귀순(Kuisoon Kim) 한국추진공학회 2014 한국추진공학회 학술대회논문집 Vol.2014 No.12
본 연구에서는 초음속 충동형 터빈의 노즐과 1단 로터 사이 축 간극 거리를 달리하며 3차원 비정상 유동해석을 수행하고 초음속 터빈의 성능 특성을 분석하였다. 수치계산은 로터 블레이드 높이의 약 6%, 10%, 20%, 30%에 해당하는 터빈의 축 방향 간극 총 네 가지 경우에 대하여 이루어졌다. 3차원 비정상 Navier-Stokes 유동해석에는 상용코드인 FLUENT를 사용하였다. 계산결과는 기존의 초음속 터빈효율 경향과 잘 일치하였으며 특정 축 간극 구간에서 효율의 급격한 감소를 보이고 그 이후에는 큰 변화가 없는 구간이 존재함을 확인하였다. In this study, three-dimensional URANS simulation has been performed to analyze the effect of the nozzle-rotor axial gap spacing of a supersonic impulse turbine on turbine performance. The computations are conducted for four axial gap cases using flow analysis program, FLUENTTM. The results show a good agreement with previous studies and have been found that the turbine efficiency decreases drastically in certain range.
최적화기법을 이용한 초음속 충동형 터빈 노즐의 비대칭 설계
정수인(Sooin Jeong),최병익(Byoungik Choi),정은환(Eunhwan Jeong),김귀순(Kuisoon Kim) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.5
본 연구에서는 초음속 충동형 터빈의 노즐에서 나타나는 유동의 과소·과대팽창 문제를 최적화 기법을 이용하여 비대칭형상을 포함해 설계함으로써 개선시키고자 하였다. 노즐 형상 설계를 위해 8개의 설계변수를 설정하였으며 목적함수로는 후류 영역 출구까지의 정효율이 최대가 되도록 하였다. 최적화에는 iSIGHT-FD가 사용되었으며 근사최적화를 위한 방법으로는 Radial Basis Function을 이용하였다. 노즐유동의 계산에는 상용 코드인 FLUENT 6.3을 사용하였으며 개선된 노즐의 정효율은 기존 대비 1.35% 증가하였고 손실계수는 19.85% 감소하였다. In this paper, the nozzle design with asymmetric configuration using the optimal method is used in order to improve the under- and over-expansion problem of the flow at the supersonic turbine nozzle. For the design of nozzle contour, 8 design variables are selected and the total-to-static efficiency from the nozzle inlet to the wake outlet is considered as the objective function to be maximized. The Fluent6.3 and the iSIGHT-FD program are used for calculation of nozzle flow and design optimization respectively. RBF(Radial Basis Function) method is chosen for approximate optimization algorithm. It is shown that the static efficiency of improved nozzle design increases 1.35% and loss coefficient decreases 19.85% as compared to baseline design.
소형 초음속 터빈의 로터 블레이드 스윕 형상이 팁 누설 유동에 미치는 영향
정수인(Sooin Jeong),최병익(Byoungik Choi),오영택(Yeong taek Oh),김귀순(Kuisoon Kim) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.12
본 논문에서는 슈라우드가 있는 로터 블레이드에 적용된 스윕 형상이 소형 초음속 축류 터빈 단에서 팁 간극을 통해 누설되는 흐름에 미치는 영향에 대하여 전산해석적인 방법으로 고찰하였다. 이를 위해 서로 다른 세 가지 스윕각(Sweep angle = -15°, 0°, +15°)을 적용하고 3차원 비정상 RANS 해석을 수행하여 그 결과를 서로 비교하였다. 로터 블레이드에 적용한 스윕각은 다양한 팁 누설현상에 영향을 주는 것으로 나타났다. 로터 스윕각이 클수록 팁 누설량은 감소하고 터빈효율은 증가하였다. This paper describes a computational investigation into the impact of a rotor blade sweep on the tip gap leakage flows in small supersonic impulse turbine with shrouded flat top rotor. For this purpose, three-dimensional unsteady RANS simulations have been performed with three different rotor blade sweep angles (-15°, 0°, +15°) and the results are compared with each other. The results show the rotor blade sweep affect the tip gap leakage mass flow rate and the turbine efficiency. The tip gap entrance flow blockage effect appears higher in BSW model (+15°)and the flow blockage effect of the rotor blade tip appears higher in FSW model (-15°) than others.
충동형 초음속 터빈의 노즐-로터 축간극에 따른 성능변화 연구
정수인(Sooin Jeong),김귀순(Kuisoon Kim),정은환(Eunhwan Jeong) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.11
부분흡입형 초음속 터빈의 노즐과 1단 로터 사이의 축방향 간극이 터빈의 단 성능과 유동장에 어떤 영향을 미치는지 알아보기 위해 터빈에 대한 3차원 유동해석을 수행하고 그 결과를 분석하였다. 상용 유동해석 프로그램 FLUENTTM를 사용하였으며 다섯 가지 경우의 축간극에 대해 계산을 하였다. 노즐-로터 축간극이 팁 누설 유량의 증가와 로터 출구의 유동각에 영향을 주는 것을 확인하였다. We performed three-dimensional CFD analysis to investigate the effect of the nozzle-rotor axial gap of a partial admission supersonic turbine on the stage performance and the flow field. The computations are conducted for five axial gaps using flow analysis program, FLUENTTM. The results show that the axial gap between nozzle and rotor give the effect on the mass flow rates of tip leakage and the flow angle at the rotor outlet.
Slip flow 영역에서의 미소채널 내 열전달 및 유동에 관한 수치적 연구
정수인(Sooin Jeong),김귀순(Kui Soon Kim),강범수(Boem Soo Kang) 한국유체기계학회 2006 유체기계 연구개발 발표회 논문집 Vol.- No.-
In this paper, the thermal lattice Boltzmann method(TLBM) proposed by Guo et al.(2002) is applied to analyze the forced convective flow and heat transfer of 2-D micro channel. Nonequilibrium extrapolation boundary condition is adopted to simulate the velocity and temperature behavior at wall boundaries. Numerical results obtained by the present study give a good prediction of the micro fluidic characteristics with thermal effects.