http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
슬릿휜-원형관 열교환기의 휜 형상에 따른 공기측 전열성능
이종휘(Jong Hwi Lee),임무기(Moo Gi Lim),강희찬(Hie Chan Kang) 대한설비공학회 2010 대한설비공학회 학술발표대회논문집 Vol.2010 No.6
The purpose of the present study is to investigate the air-side pressure drop and the heat transfer characteristics of slit fin-tube heat exchanger. Seven kinds of plane and slit fin tested numerically. The results obtained for the heat transfer, pressure drop, and fin temperature are compare and discussed. The S shape edged fin proposed to reduce fin area in the present work showed the comparable performance of the conventional plane and slit fin.
석탄회를 활용한 경량기포 저강도 고유동화재의 최종비빔시간과 희석비에 따른 공학적 특성
이종휘(Lee Jong Hwi),나정흠(Na,Jeong Hum),이창기(Lee Chang Ki),천병식(Chun Byung Sik) 대한토목학회 2012 대한토목학회논문집 C Vol.32 No.1
석탄회를 주재료로 사용한 저강도 고유동화재는 다짐이 필요없고 재굴착이 용이한 고유동성의 재료로 개발되었다. 본 연구에서는 이를 구조물 뒤채움용으로 사용하기 위해 경량화에 초점을 맞춘 기포를 혼입한 경량기포 저강도 고유동화재의 기초 연구로써 최종비빔시간, 기포의 희석비에 따른 공학적 특성을 규명하여 최적비빔시간 및 최적희석비를 결정하였다. 기준 배합비를 중심으로 최종비빔시간과 희석비에 따라 플로우 시험, 기포슬러리의 단위중량측정 시험 및 일축압축강도 시험을 실시하였다. 시험결과, CASE N(최종비빔 4분, 희석비 2%), CASE O(최종비빔 4분, 희석비 3%)가 유동성(20cm 이상), 경량성(12~16kN/m³) 및 일축압축강도(800~1200kPa) 기준을 만족하는 것으로 나타나 이를 기준으로 구조물 뒤채움용 경량기포 CLSM재료를 제작 및 사용함에 있어서 참고가 될 수 있을 것으로 판단된다. CLSM (Controlled Low Strength Material) using coal ash, which has the advantages of self-leveling, self-compacting, flowability, easy re-excavation, has been developed. In this study, CLSM additionally mixed with foaming agent for structural backfill material, aimed at lightness of materials, was developed called light-weight foamed CLSM. As the basic study of this material, to determine the optimum final mixing time and dilution ratio of existing light-weight foamed CLSM, flow, slurry unit weight and unconfined compressive strength test according to each impact factor were performed at the standard mix proportion. As the results of tests, CASE N (Final mixing time 4 min, dilution ratio 2%), CASE O (Final mixing time 3 min, foam agents ratio 3%, dilution ratio 2%) were satisfied with the standard of flow test (above 20cm), slurry unit weight test (12~16 kN/m³) and unconfined compressive strength test (800 kPa~1200 kPa). These results will indicate the standard optimum final mixing time and dilution ratio of light-weight foamed CLSM for structural backfill.
이종휘(Jong Hwi Lee),임무기(Mu Gi Lim),강희찬(Hie Chan Kang) 대한설비공학회 2009 대한설비공학회 학술발표대회논문집 Vol.2009 No.-
The purpose of the present study is to investigate the flow resistance and the heat transfer characteristics of V type circular fin-tube heat exchanger. Four kinds of V type fin having the same fin area and the different span wise angle tested numerically. Test data for the heat transfer, pressure drop and fin temperature were shown and discussed. The pressure drop and heat transfer increased for decreasing the span wise angle up to 58% and 25% respectively.
이종휘(Jong Hwi Lee),임무기(Moo Gi Lim),강희찬(Hie Chan Kang) 대한설비공학회 2009 설비공학 논문집 Vol.21 No.12
The purpose of the present study is to investigate the flow resistances and heat transfer characteristics of V-shaped circular fin-tube heat exchangers. Four types of V-shaped fins in which the fin areas are identical but the areas of the V-shaped portion are different have been tested numerically. The results obtained for heat transfer, pressure drop, and fin temperature are discussed in this paper. With increase in the area of the V-shaped portion, the pressure drop and heat transfer increase up to 40% and 24%, respectively, in the present test range.
석탄회를 활용한 CLSM의 열전도도에 관한 실험적 연구
이승준(Lee Seung Jun),이종휘(Lee Jong Hwi),조현수(Cho Hyun Soo),천병식(Chun Byung Sik) 대한토목학회 2012 대한토목학회논문집 C Vol.32 No.3
Due to current interest in creation of urban space and urban landscape, more emphasis has been placed on underground space development. With increasing number of underground power cables and its importance, a study of backfill materials for pipe is now imperative. Backfill materials require outstanding thermal characteristics since breakdown of cable insulation can be caused if heat generated from transmission of underground power cables had not been effectively discharged through backfill materials. Also, coal ash, which are industrial by-products, is being produced in high volume every year. Among them, ponded ash (PA) is not recycled and instead, mostly buried. Therefore in this study, thermal conductivity test based on mixture ratio (PA, ponded ash : FA, fly ash) was performed to evaluate the thermal conductivity characteristics of CLSM (controlled low strength materials) with coal ash. The results indicate that the mixture ratio (PA, ponded ash : FA, fly ash) of 80:20, water contents of 28~30%, and cement contents of 7~11% showed the highest conductivity at 0.796~0.884W/mK and thus, considered optimal in terms of recycling ponded ash (PA) as well as tor maximizing utilization as backfill materials for pipe in underground. 라이프라인의 공간 창출 및 미관 등의 이유로 지하공간의 개발이 활발해짐에 따라 지중하부에 매설되는 관(pipe)은 점차 증가하고 있으며 새로운 재료를 활용한 관거 뒤채움용 CLSM(Controlled Low Strength Materials)에 관한 연구의 비중은 점점 증가하고 있는 추세에 있다. 그리고 지중송전케이블에서 송전으로 인하여 발생된 열을 뒤채움재가 효과적으로 방출시키지 않으면 절연파괴에 이를 수 있으므로 뒤채움재는 반드시 우수한 열적 특성을 필요로 한다. 한편, 산업부산물인 석탄회는 매년 상당한 양이 발생되고 있으며, 그 중 매립회(ponded ash, PA)는 재활용되지 못하고 회처리장에 매립되고 있다. 본 연구에서는 산업폐기물인 석탄회를 활용한 관거 뒤채움용 CLSM의 열전도도 특성을 규명하기 위하여 배합비에 따른 열전도도(thermal conductivity) 시험을 실시하여 값의 변화를 검토하였다. 시험결과, 배합비(PA:FA) = 80:20, water contents = 28~30%, cement contents = 7, 9, 11%에서 0.796~0.884W/mK을 나타냈으며 이는 타 배합비보다 높은 열전도도를 나타내었으며 현재 폐기물로 처리되고 있는 매립회를 대량 유효 활용하는 측면에서 적합할 뿐 아니라 전력 및 통신 등 관거 뒤채움재로서의 활용이 클 것으로 판단된다.