http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김병철(B. C. Kim),목형수(H. S. Mok),최규하(G. H. Choe),구현철(H. C. Ku),허정(J. Hur),이강윤(K. Y. Lee),이정민(J. M. Lee) 전력전자학회 2007 전력전자학술대회 논문집 Vol.- No.-
소나용 1㎒급 LCC 공진형 전력증폭기의 설계 방법을 연구하였고 소나와 LCC 전력증폭기에 대한 이해를 돕기 위해 관련 지식이 조사되었다. 전력증폭기는 높은 스위칭 주파수를 고려하여 ZVS 동작 조건을 만족하도록 설계되었으며 변압기를 이용하여 트랜스듀서와의 임피던스 매칭을 이루었다. 설계된 전력증폭기는 Simplorer를 이용한 시뮬레이션을 통하여 전력증폭기 설계 과정의 타당성을 확인하였다.
반응석출법에 의해 피복된 TiC의 경화거동에 관한 연구
남기석,변응선,이구현,김도훈( K . S . Nam,E . S . Byon,G . H . Lee,D . H . Kim ) 한국열처리공학회 1994 熱處理工學會誌 Vol.7 No.4
In this study, lattice parameter, binding energy and microstructures of TiC layer according to the addition of Fe, Cr were investigated in the reactive deposition coating. From the results, the lattice parameters of the TiC layers by using ferro-titanium as a precursor were 4.329∼4.339A but the lattice parameters of the TiC layers formed by ferro-titanium and ferro-chromium decreased to 4.316∼4.330Å. The hardness of the former`s was HV(100g) 3,000∼3,400㎏/㎜ and the hardness of the latter`s was HV(100g) 3,800∼3,900. But, regardless of Cr and Fe, the binding energy of TiC layers were 454.75 eV for Ti2p_(3/2) and were 281.85 eV for Cls. Meanwhile, the TiC layers were densified by addition of Fe, Cr and internal defects were reduced Therefore, it can be concluded that the remarkable hardness increment was obtained by the improvement of microstructures of TiC rather than the increase of bond strength or Peierls stress.
[재료] 복합경화처리에 의한 고탄소크롬강의 내마모성에 관한 연구
이태청(T.C.Lee),조형준(H.J.Jho),이구현(G.H.Lee),신평우(P.W.Sjin) 한국자동차공학회 1999 한국자동차공학회 춘 추계 학술대회 논문집 Vol.1999 No.11_2
고탄소크롬강을 1150℃에서 단조후 Spherodizing과 가공을 거친후 Nitro-carburising, Q.T처리, 고주파처리 및 복합경화처리를 하여 경도시험, 조직관찰, 마멸시험을 실시하여 기계적성질을 조사하였다. 경도특성에 있어서는 Nitro-carburising, Q.T처리를 하였을 때 표면부와 심부에서 모두 Hv 730~770정도의 유사한 분포양상을 나타내었다. Nitro-carburising의 경우는 표면층에서는 ??상의 석출과 Free-Carbide 및 Retained-Austenite가 존재함을 알 수 있고, Q.T처리 시에는 경화주체가 Martensite변태인 것에 기인하여 Matrix 전체가 Martensite의 석출과 함께 5~10%정도의 Retained-Austenite가 분포하는 것으로 나타났다.<br/> 고주파처리와 복합경화처리를 행한 시험편은 표면부가 약 0.5~1mm정도의 표면경화층이 형성되었고, 이 경화층의 경도는 Hv 690~730, Hv720~770정도로 각각 나타났다. Matrix의 경도값은 Spherodizing후의 경도값인 Hv 185~210정도로 나타남을 알 수 있었다.<br/> 고주파처리후의 미세조직은 전형적인 Martensite 변태로 강화됨을 알 수 있었고, 복합경화처리의 경우는 최 외층부에는 ??상, 표면직하에는 Fe₃C, Retained-Austenite 및 Martensite가 석출됨이 관찰되었다. 이들 조직상의 특성을 시험한 결과 일반적인 Martensite 변태경화보다 복합 화합물층이 형성된 경우가 내마모성, 내소착성이 향상되는 결과를 나타내었다.<br/>