http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
< 구두-A-09 > 목재-콘크리트 복합 바닥 시스템의 Screw 전단 접합부 평가
이현정 ( Hyeon-jeong Lee ),오정권 ( Jung-kwon Oh ) 한국목재공학회 2019 한국목재공학회 학술발표논문집 Vol.2019 No.1
Timber-Concrete Composite(TCC) can provide higher stiffness as floor system. TCC is a type in which timber resistant to the tensile force and concrete resistant to the compressive force are connected by shear connectors, so the performance of the shear joint can be dominated to determine the performance of TCC. As a preliminary experiment to determine the performance of the shear connection of TCC, a slip test was carried out. Self-tapping screw (STS) was used for TCC shear connectors in consideration of the convenience of installation and existing researches. The prefabricated method was used in which STS was installed at regular intervals on larch glulam and concrete was poured thereon for curing. As a result of the experiment, slip modulus of TCC was changed according to the installation direction of STS. Withdrawal capacity was a decisive effect on the performance of shear connectors in TCC, and bent motion didn’t affect or reduced the performance of shear connectors in TCC.
동등성능 철근콘크리트, 강재, 목재 보의 온실가스 배출량 및 내재 에너지 분석
오재원 ( Jae-won Oh ),방성준 ( Sung-jun Pang ),안경선 ( Kyung-sun Ahn ),김지용 ( Ji-yong Kim ),김민정 ( Min-jeong Kim ),장윤성 ( Yoon-seong Chang ),오정권 ( Jung-kwon Oh ) 한국목재공학회 2022 한국목재공학회 학술발표논문집 Vol.2022 No.1
최근 지속 가능한 발전에 관한 관심이 커지며, 전과정평가를 통한 환경 영향 평가가 활발하게 이루어지고 있다. 건축 부문에서도 하나의 건물을 대상으로 자재 생산부터 시공, 운영, 철거까지 전과정의 환경 영향 평가가 수행되고 있다. 그러나, 개별 평가 결과는 대상 건물의 설계조건이 상이하여 건축 재료에 따른 환경 영향을 비교하기에 어려움이 있다. 본 연구에서는 동등한 구조 성능을 가진 철근콘크리트, 강재, 목재 보의 온실가스 배출량과 내재 에너지를 비교 분석하였다. 동등한 성능으로 설계하기 위해 사용 재료와 단면 형상을 제외한 모든 조건을 동일하게 가정하여 설계하였고, 기능 단위는 보의 1m로 시스템 경계는 원자재 채취, 수송 및 제품 생산까지의 과정으로 정의하여 평가를 진행했다. 온실가스 배출량은 철근콘크리트, 강재, 목재의 비가 약 1.0, 1.8, 0.7로 나타났고, 내재 에너지도 이와 유사한 경향으로 나타났다. 단위 부피 생산 과정의 온실가스 배출량과 내재 에너지는 철근콘크리트, 강재, 목재의 비가 약 26, 1.0, 0.5 수준으로 본 연구의 결과와 큰 차이가 있음을 확인했다. 추후 연구에서는 동등한 성능을 가진 전체 구조체를 대상으로 전과정평가를 수행하여 연구 내용을 보완할 예정이다.
< 구두-A-11 > 합판과 구조용 목재로 구성된 Ply-lam의 슬라브 설계
방성준 ( Sung-jun Pang ),이현정 ( Hyeon-jeong Lee ),양승민 ( Seung Min Yang ),강석구 ( Seog Goo Kang ),오정권 ( Jung-kwon Oh ) 한국목재공학회 2019 한국목재공학회 학술발표논문집 Vol.2019 No.1
The general cross-laminated timber (CLT) is made by structural timber. Ply-lam which is made by plywood and structural timber was developed. In this study, moment resistance and bending stiffness of ply-lam were evaluated for slab design. Bending (span/depth ratio was 24/1) and shear test (span/depth ratio was 12/1) were carried out according to EN 16351. Moment resistance and bending stiffness were predicted by using transformed section method and its effectiveness was investigated by comparing the predicted values with the actually measured values. The results show that 1) the shear test method in EN 16351 was not suitable for ply-lam due to the stronger rolling shear performance of ply-lam. 2) General prediction methods for structural properties of CLT can also be used to predict the structural properties of ply-lam. 3) The moment resistance and effective bending stiffness of ply-lam was 16.6% higher than the general CLT because the MOE of plywood was higher than that of lamina perpendicular to grain.