http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
물의 결빙이 고분자전해질 연료전지 성능에 미치는 영향 및 그 원인에 관한 연구
고재준,조은애,하흥용,홍성안,이관영,임태원,오인환,Ko, Jae-Joon,Cho, Eun-Ae,Ha, Heung-Yong,Hong, Seong-Ahn,Lee, Kwan-Young,Lim, Tae-Won,Oh, In-Hwan 한국전기화학회 2003 한국전기화학회지 Vol.6 No.1
고분자 전해질 연료전지를 자동차용 동력원으로 사용하는 경우 겨울철 운전 시 연료전지 내에 존재하는 물이 결빙하여 연료전지의 성능을 저하시킬 수 있다. 물의 결빙이 연료전지의 성능에 미치는 영향을 조사하기 위해 연료전지의 온도를 운전온도인 $80^{\circ}C$에서 물이 결빙하기에 충분한 온도인 $-10^{\circ}C$까지 열순환하면서 전류전압 곡선을 측정했다. 열순환이 반복됨에 따라 물의 상변화와 이에 따른 부피변화로 인해 연료전지의 성능이 감소했다. 물의 결빙이 연료전지의 성능을 저하시키는 원인을 규명하기 위해 BET분석과 순환전류전압법, 임피더스 분석을 이용해 열순환이 전극의 구조와 분극 저항에 미치는 영향을 조사했다. Freezing of water in a polymer electrolyte membrane fuel cell (PEMFC) may cause severe problems in driving a fuel cell vehicle during the winter time. Characteristics of PEMFC which suffered low temperatures below zero degree was examined with the thermal cycles from 80 to $-10^{\circ}C$. With the thermal cycles, the cell performance was degraded due to the phase transformation and volume changes of water. Effects of freezing of water in PEMFC on the electrode structure and polarization resistance were examined by BET analysis, cyclic voltammetry, and AC impedance spectroscopy.
Development of a Durable Startup Procedure for PEMFCs
김재홍(Kim, Jae-Hong),조유연(Jo, Yoo-Yeon),장종현(Jang, Jong-Hyun),김형준(Kim, Hyung-Juhn),임태훈(Lim, Tae-Hoon),오인환(Oh, In-Hwan),조은애(Cho, Eun-Ae) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
Various polymer electrolyte membrane fuel cell (PEMFC) startup procedures were tested to explore possible techniques for reducing performance decay and improving durability during repeated startup-shutdown cycles. The effects of applying a dummy load, which prevents cell reversal by consuming the air at the cathode, on the degradation of a membrane electrode assembly (MEA) were investigated via single cell experiments. The electrochemical results showed that application of a dummy load during the startup procedure significantly reduced the performance decay, the decrease in the electrochemically active surface area (EAS), and the increase in the charge transfer resistance (R_{ct}), which resulted in a dramatic improvement in durability. After 1200 startup-shutdown cycles, post-mortem analyses were carried out to investigate the degradation mechanisms via various physicochemical methods including FESEM, an on-line CO₂ analysis, EPMA, XRD, FETEM, SAED, FTIR. After 1200 startup-shutdown cycles, severe Pt particle sintering/agglomeration/dissolution and carbon corrosion were observed at the cathode catalyst layer when starting up a PEMFC without a dummy load, which significantly contributed to a loss of Pt surface area, and thus to cell performance degradation. However, applying a dummy load during the startup procedure remarkably mitigated such severe degradations, and should be used to increase the durability of MEAs in PEMFCs. Our results suggest that starting up PEMFCs while applying a dummy load is an effective method for mitigating performance degradation caused by reverse current under a repetition of unprotected startup cycles.