http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Design and implementation of planar UWB antenna with dual band rejection characteristics
양운근,남태현 한국전기전자학회 2023 전기전자학회논문지 Vol.27 No.1
In this paper, we design and implement an Ultra-Wide Band (UWB, 3.1~10.6 GHz) antenna with 5G mobilecommunication (3.42~3.70 GHz) and Wireless Local Area Network (WLAN, 5.15~5.825 GHz) bands rejection characteristics. The proposed antenna consists of a planar radiation patch with two slots. The upper slot contributes to reject 5Gmobile communication band and the lower slot contributes to reject WLAN band. The Voltage Standing Wave Ratio(VSWR) values of the proposed antenna show good performances in whole UWB band except for rejection bandsbased on VSWR 2.0. The proposed UWB antenna was simulated using High Frequency Struture Simulator (HFSS) byAnsoft. The simulated antenna showed dual rejection bands of 3.31~3.92 GHz and 5.04~5.90 GHz in UWB band,and measured antenna showed dual rejection bands of 3.35~3.97 GHz and 5.06~5.97 GHz. The largest VSWRvalues measured at each rejection band are 13.60 at 3.64 GHz and 10.25 at 5.52 GHz. The measured maximumgain is 5.31 dBi at 10.00 GHz. The lowest gains for the measured antenna at rejection bands are -8.73 dBi at 3.70GHz and -4.36 dBi at 5.56 GHz.
Design and Implementation of Internal Multi-Band Monopole Antenna for Mobile Phones
양운근,Ling Zhi Cai,양철용 한국전기전자학회 2011 전기전자학회논문지 Vol.15 No.4
In this paper, we proposed an internal multi-band monopole antenna for mobile phone that can be used for smart phones. The proposed antenna has a small volume of 38×8.5×5 mm3, ground size is 100×60 mm2, and covers the GSM900 (Global System for Mobile communications : 880-960 MHz), DCS (Digital Communications System : 1710-1880 MHz), K-PCS (Korea-Personal Communications Service : 1750-1870 MHz), US-PCS (US Personal Communications Service : 1850-1990 MHz), Bluetooth (2400-2483 MHz), Wibro (2300-2390 MHz) and WLAN (Wireless Local Area Network : 2400-2483.5 MHz) bands. The measured peak gains of the implemented antenna are 1.15 dBi at 920 MHz, 3.58 dBi at 1795 MHz, 3.46 dBi at 1810 MHz, 2.91 dBi at 1920 MHz, 5.18 dBi at 2345 MHz, 3.37 dBi at 2442 MHz.
EMI 도료 패턴과 폴딩 각도에 따른 휴대폰의 SAR 변화에 관한 연구
양운근,이원규,손지명,Yang, Woon-Geun,Lee, Won-Kew,Son, Ji-Myoung 한국전자파학회 2005 한국전자파학회논문지 Vol.16 No.9
본 논문에서는 휴대폰 front case의 EMI(Electromagnetic Interference) 도료 패턴과 폴딩 각도 변화에 따른 SAR(Specific Absorption Rate) 값의 변화를 전산 모의 실험을 통하여 살펴보아 휴대폰 개발 초기 단계에서 SAR를 고려할 수 있도록 하였다. 첫 번째, front case에 칠해진 EMI 도료의 여러 가지 패턴을 모델링한 휴대폰에 적용하여 전산 모의 실험을 한 결과 EMI 도료 패턴에 따라 다른 SAR 값을 보였다. EMI 도료 패턴에 따른 SAR 값에 대한 전산 모의 실험 중 EMI 도료가 있을 경우를 기준으로 하였을 때, 헤어핀 패턴이 가장 좋은 $8.04\%$의 감소 효율을 보였고, EMI 도료가 없는 경우 $5.94\%$의 감소 효율을 보였다. 이때 폴딩 각도는 $150^{\circ}$로 하였다. 두 번째, 폴딩 각도를 $140^{\circ},\;150^{\circ},\;160^{\circ}$로 변화하면서 SAR 값에 대한 전산 모의 실험을 하였다. 전산 모의 실험에 사용된 모델의 경우 폴딩 각도를 늘릴수록 SAR 값이 감소함을 보였다. 폴딩 각도가 $160^{\circ}$이고 기준 패턴을 적용하였을 때 SAR 값은 1.61 W/kg이 되었으며, 제안한 헤어핀 패턴을 폴딩 각도가 $160^{\circ}$일 때 적용한 결과 가장 낮은 SAR 값인 1.45 W/kg의 값을 얻었다. In this paper, in order to consider SAR(Specific Absorption Rate) problem at the beginning stage of a handset development, we investigated the Shh value change by using simulation method according to various EMI(Electromagnetic Interference) paint patterns on front case of a handset and folding angles. First, we made some experiments with EMI paint pattern on front case of a handset, and obtained results showed that different patterns of EMI paint had different SAR values. Among the simulation results on SAR value according to EMI paint patterns, the hairpin pattern showed the best performance, i.e. the decrease efficiency of $8.04\%$ and completely removed pattern showed the decrease efficiency of $5.94\%$. Orignal pattern was set as the reference and the folding angle was $150^{\circ}$. Second, simulation was carried out with changing folding angle from $150^{\circ}$ to $140^{\circ}$ and $160^{\circ}$. Simulation results for the modeled handset showed that SAR value was decreased with increasing the folding angle. When the folding angle was $160^{\circ}$ and with original pattern, we got the SAR value of about 1,61 W/kg. When we applied hairpin pattern with the folding angle of $160^{\circ}$, we got the lowest SAR value of about 1.45 W/kg.
이중 대역저지 특성을 가지는 UWB 안테나 설계 및 구현
양운근,남태현,Yang, Woon Geun,Nam, Tae Hyeon 한국전기전자학회 2018 전기전자학회논문지 Vol.22 No.2
이중 대역저지 특성을 가지는 UWB(Ultra Wide Band) 안테나를 설계 및 구현하였다. 슬롯을 포함한 평면 방사패치, 스트립선로 양쪽의 기생소자와 아랫면의 접지면으로 제안된 안테나가 구성되어있다. 평면 방사 패치 내에 있는 슬롯과 기생소자가 각각 해당 대역을 저지한다. 슬롯은 WiMAX(World interoperability for Microwave Access, 3.30~3.70 GHz) 대역을, 기생소자는 X-Band(7.25~8.395 GHz) 대역을 저지하는데 각각 기여한다. 제안된 안테나의 설계하고 성능을 평가하는데 Ansoft의 HFSS(High Frequency Structure Simulator)가 사용되었다. 전산모의실험결과는 저지 대역인 3.30~3.86 GHz, 7.21~8.39 GHz를 제외한 구간에서 VSWR(Voltage Standing Wave Ratio)는 2.0 이하를 보였다. 구현된 안테나의 VSWR 측정 결과는 저지 대역인 3.25~3.71 GHz, 7.25~8.46 GHz를 제외한 3.10~10.60 GHz 구간에서 VSWR 값이 2.0 이하로 나타났다. An UWB(Ultra Wide Band) antenna with band rejection characteristics is designed and implemented. A planar radiation patch with slot, parasitic elements on both sides of strip and ground plane on back side consist the proposed antenna. The slot in the radiation patch and parasitic elements contribute corresponding bands rejection characteristics. The slot contributes for WiMAX(World interoperability for Microwave Access, 3.30~3.70 GHz) band rejection and parasitic elements contribute for X-Band(7.25~8.395 GHz) rejection. Ansoft's HFSS(High Frequency Structure Simulator) was used to design the proposed antenna and performance simulations. Simulation result showed VSWR(Voltage Standing Wave Ratio) less than 2.0 for UWB band except for dual rejection bands of 3.30~3.86 GHz and 7.21~8.39 GHz. And VSWR measurement result for the implemented antenna shows less than 2.0 for 3.10~10.60 GHz band except dual rejection bands of 3.25~3.71 GHz and 7.25~8.46 GHz.