http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양기석,안창열,손수원,강명찬,김병규,이송,Yang, Kee-Sok,Ahn, Chang-Yol,Son, Su-Won,Kang, Myeong-Chan,Kim, Byeong-Gyu,Lee, Song (사)한국토질및기초기술사회 2006 기술발표회 Vol.2006 No.-
광양항 3단계 1차 컨테이너터미널 부지 연약지반개량의 경우 광양지역의 특성상 재하용 토사확보 곤란, 시공기간 단축 및 환경훼손 최소화를 위해 진공압밀공법이 적용되었다. 본 사례연구에서는 진공압밀공법의 시공에 따른 문제점 및 개선사항을 제시하였고, 현장계측 및 진공 압밀완료 후에 실시된 지반조사 결과 등을 분석하여 준설매립지반에서의 진공압밀공법의 적용성을 평가하였다.
해상 풍력발전체에 작용하는 풍하중과 파랑하중간의 비선형 상쇄간섭 해석
조용준(Yong Jun Cho),양기석(Kee Sok Yang) 한국해안해양공학회 2015 한국해안해양공학회 논문집 Vol.27 No.5
해상 풍력발전체 최적설계에 필요한 파력과 풍력의 비선형 상쇄 간섭 생성기작을 규명하기 위해 5MW급 해상풍력 발전체를 대상으로 1/50 scale로 수리모형실험을 수행하였다. 해상풍력 발전체의 하부구조물은 시공이 용이하여 가장 선호되는 mono pile로 선정하였다. 돌풍은 Kaimal 스펙트럼과 상호스펙트럼에 기초한 Monte carlo 모의로 재현하였으며, 모의결과를 토대로 순간 최대풍속은 10 m/s로 조정하였다. 파고는 해상풍력 시범단지가 예정되어있는 우리나라 서해안 해역의 파황을 고려하여 Hs= 0.1 m, 0.15 m, 0.2 m로 선정하였다. 수리모형실험 결과, 파력과 풍력의 비선형 상쇄 간섭은 해역이 거칠수록 보다 확연하게 관측되었으며, 이러한 결과는 해수면 요철로 인해 대기와 해수면의 경계에서 출현하는 Large eddy가 비선형 상쇄 간섭의 생성 기작이라는 우리의 추론을 뒷받침한다. In order to quantitatively estimate the nonlinear destructive interaction of wave load with wind load, which is very vital for the optimal design of offshore wind energy converter, we carried out a hydraulic model test and wind tunnel test. As a substructure of offshore wind energy converter, we would deploy the monopile, which is popular due to its easiness in construction. Based on the simulation using Monte Carlo simulation using Kaimal spectrum and cross spectrum, the instantaneous maximum wind velocity is adjusted to 10 m/s. And, considering the wave conditions of the Western Sea where a pilot wind farm is planned to be constructed, Hs= 0.1 m, 0.15 m, 0.2 m is carefully chosen. It turns out that the nonlinear destructive interaction between the wind and wave loads acting on the offshore wind energy converter is more clearly visible at rough seas rather than at mild seas, which strongly support our deduction that a Large eddy, a swirling vortex developed near the bumpy water surface in the opposite direction of the wind, is the driving mechanism underlying nonlinear destructive interaction between the wind and wave loads.
보강재의 강성도를 고려한 연약지반 표층처리공법 지지력 산정방법에 관한 연구
함태규(Ham Tae-Gew),서세관(Seo Se-Gwan),조삼덕(Cho Sam-Deok),양기석(Yang Kee-Sok),유승경(You Seung-Kyong) 한국토목섬유학회 2009 한국지반신소재학회 논문집 Vol.8 No.2
본 연구는 국내의 초연약지반에 적용 가능한 표층보강재를 이용한 연약지반 표층처리공법을 정립시키기 위한 기초적 연구로서 표층처리공법 지지력 산정방법을 제안하는 것을 목적으로 하고 있다. 이를 위하여 직포, 지오그리드, 강봉(대나무 대채재료)을 이용한 보강재의 단부 구속조건을 완전구속, 부분구속(3종류)으로 한 21 종류의 실내모형실험을 수행하였다. 또한 실험결과를 이용해 보강재의 강성도가 지지력효과에 미치는 영향을 고려한 지지력 산정방법을 제안하였다. This study, as basic research which was intended to develope the surface reinforcement method using reinforcement material which is applicable to very soft ground in Korea, was aimed at proposing the design parameter for the surface ground improvement method. To that end, a wide width tensile test using geotextile, geogrid and steel bar (substitute for bamboo) and 21 kinds of the laboratory model tests with the end restraint conditions of the reinforcement that comprises the constrained and partially constrained (3 types) conditions were conducted. Moreover, a new procedure was proposed to take into account the effect of the stiffness of Reinforce materials on bearing capacity theory of Surface Reinforcement Method for Soft Ground.