http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
리모트 수소 플라즈마를 이용한 Si 표면 위의 Fe 불순물 제거
이종무,박웅,전부용,전형탁,안태항,백종태,신광수,이도형,Lee, C.,Park, W.,Jeon, B.Y.,Jeon, H.T.,Ahn, T.H.,Back, J.T.,Shin, K.S.,Lee, D.H. 한국재료학회 1998 한국재료학회지 Vol.8 No.8
리모트 수소 플라즈마에 의한 Si 웨이퍼 표면 위의 Fe 불순물의 제거효과를 조사하였다. 세정시간 10분 이하와 rf-power 100W이하의 범위에서 최적 공정조건은 각각 1분과 100W이였으며, 플라즈마 노출시간이 짧을수록, rf-power가 증가할수록 Fe제거 효과가 더 향상되는 것으로 나타났다. 또한, 고압보다는 저압 하에서 Fe 제거효과가 더 우수하였는데, 저압 하에서는 $\textrm{H}_2$ 유량이 20sccm, 고압 하에서는 60sccm일 때 Fe 제거효과가 가장 우수하였다. 플라즈마 세정 직후의 열처리는 금속오염의 제거효과를 향상시켰으며, $600^{\circ}C$에서 최상의 효과를 얻을 수 있었다. AFM 분석결과에 의하면 표면 거칠기는 플라즈마 세정에 의하여 30-50% 향상되었는데, 이것은 Fe 오염물과 더불어 Si 표면의 particle이 제거된 데 기인하는 것으로 생각된다. 또한 본 논문에서는 수소 플라즈마에 의한 Si 웨이퍼 표면의 Fe 제거기구에 관해서도 자세히 고찰하였다. Effects of remote hydrogen plasma cleaning process parameters on the removal of Fe impurities on Si surfaces and the Fe removal mechanism were investigated. Fe removal efficiency is enhanced with decreasing the plasma exposure time and increasing the rf-power. The optimum plasma exposure time and rf-power are 1 min and 100W. respectively, in the range below 10 min and 100W. Fe removal efficiency is better under lower pressures than higher pressures, and the optimum $\textrm{H}_2$ flow rate was found to be 20 and 60sccm, respectively, under a low and a high pressure. The post-RHP(remote hydrogen plasma) annealing enhanced metallic contaminants removal efficiency, and the highest efficiency was achieved at $600^{\circ}C$. According to the AFM analysis results Si surface roughness was improved by 30-50%, which seems to be due to the removal of particles by the plasma cleaning. Also. Fe impurities removal mechanisms by remote hydrogen plasma are discussed.
강성관(S. K. Kang),고대홍(D.-H. Ko),오상호(S. H. Oh),박찬경(C. K. Park),이기철(K. C. Lee),양두영(D. Y. Yang),안태항(T. H. Ahn),주문식(M. S. Joo) 한국진공학회(ASCT) 2000 Applied Science and Convergence Technology Vol.9 No.4
15%와 42%의 Ge 함량을 갖는 poly Si_(1-x)Ge_x 박막을 700℃의 습식 산화 분위기에서 산화 공정을 진행하고, 박막의 산화 거동을 RBS, XPS, cross-sectional TEM으로 분석하였다. Poly Si_(0.85)Ge_(0.15) 박막의 경우, GeO₂에 비해 열적으로 안정한 SiO₂가 우천 생성되고, 반응에 참여하지 못한 Ge은 산화막과 poly Si_(1-x)Ge_x 박막의 계면에 축적되어 산화막 하부의 Ge 농도가 증가함을 확인하였다. Poly Si_(0.58)Ge_(0.42) 박막의 경우, 산화막내에 많은 양의 Ge이 GeO₂와 Ge의 형태로 존재하였고, 이러한 GeO₂의 형성으로 인해 산화속도의 증가를 확인하였다. 이러한 분석 결과를 바탕으로 Ge 함량 증가에 따른 poly Si_(1-x)Ge_x 박막의 산화 모델을 제 시하였다. We investigated the oxidation behavior of poly Si_(1-x)Ge_x films (X=0.15, 0.42) at 700℃ in wet oxidation ambients and analyzed the oxide by XPS, RBS, and cross-sectional TEM. In the case of poly Si_(0.85)Ge_(0.15) films, SiO₂ was formed on the poly Si_(1-x)Ge_x films and Ge was rejected from growing oxide, subsequently leading to the increase of Ge content. In the case of poly Si_(0.58)Ge_(0.42) films, we found that SiO₂-GeO₂ were formed on the poly Si_(1-x)Ge_x films due to high Ge content. Finally, we proposed the oxidation model of poly Si_(1-x)Ge_x films.