http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
자동차 클러치 마찰판의 동력전달특성에 대한 실험적 고찰
이인규(I. G. Lee),이은진(E. J. Lee),신현명(H. M. Shin),이재천(J. C. Lee),류하오(H. Liu,),김종만(J. M. Kim),서형준(H. J. Seo) 유공압건설기계학회 2017 유공압건설기계학회 학술대회논문집 Vol.2017 No.5
The wet clutch is a type that transmits power by engaging the clutch plate submersed in the oil. The structure is complicated but it’s operational characteristic smooth and it can protect the friction surface. Since the frictional force generated on one side of the clutch disk facing is equal to the product of the normal force acting on the facing and the friction coefficient, the clutch disk facing must have a suitable friction coefficient. Also it needs to be highly abrasion resistant and durable, transition of friction coefficient should be minimal. SAE No.2, is widely used for the evaluation of the friction characteristics and durability of wet clutches. It is mainly used for analyzing the performance of disk type clutches. In this study, an SAE No.2 friction test of a clutch was conducted to obtain the friction coefficient of clutch friction plate and to analyze the characteristics.
차량 변속기 클러치의 노화에 따른 내열 강도시험에 대한 연구
필계개(J. K. Bi),이은진(E. J. Lee),만이봉(Y. P. Wan),김종만(J. M. Kim),이재천(J. C. Lee),류하오(H. Liu),신현명(H. M. Shin) 유공압건설기계학회 2018 유공압건설기계학회 학술대회논문집 Vol.2018 No.6
클러치 디스크가 마모되면 노화가 일어나고 여러 증상이 나타난다. 그중에 대표적인 것이 디스크의 슬립으로 인한 출력 감소와 기어 걸림 증상이 있다. 치수와 공간의 제한으로 건식 클러치는 비교적 낮은 냉각 조건을 갖추고 있다. 건식 클러치 부품들이 고온 환경에서 계속 작동하고 있기 때문에 전체 클러치의 성능과 수명에 심각한 영향을 미친다. 보통 차량이 주행을 시작하거나 기어를 바꿀 때 클러치는 미끄러져 움직이고, 차량의 중량이 증가함에 따라 클러치 마모가 더 심해질 수 있다. 클러치 디스크는 밀폐하고 고속회전, 리드하기 힘든 공간이 작업하기 때문에 표면온도의 채집하는 것이 어렵고 마모표면 온도를 측정하는 문서는 많지 않다. 현재 마찰재의 표면 온도에 관한 대부분의 연구는 이론에 초점을 맞춘다. 본 연구는 클러치 마찰 특성 분석에 많이 사용하는 클러치 내열강도시험기(PT System Dynamo Facility)를 이용하여, 건식 디스크 클러치의 마찰 특성 시험을 하였다. 실험은 마모정도에 따라 클러치 디스크를 새 제품(No Attrition), 중간 정도 마모(Moderate Attrition), 노화 마모가 심각(Severity Attrition)한 것으로 세 가지 종류를 비교한다. 클러치의 마찰시험을 통해 얻은 데이터를 이용하여 클러치 디스크의 마모도에 따른 온도 특성을 분석한다.
임문혁,신현명,박태상 啓明大學校 産業技術硏究所 1999 産業技術硏究所 論文報告集 Vol.22 No.1
The chattering and reversal thud generate an objectionable noise and affect the performance of the automotive windshield wiper system. The numerical results of the frictional contact analysis using ABAQUS and processes may be utilized in industry for the optimization of the windshield wiper system, Stability of the dimensional wiper blade has been studied numerically and successful results for the aforementioned phenomena. Also which will be useful to locate the effective position of arch shaped.
김성훈,신현명,임문혁 啓明大學校 産業技術硏究所 1999 産業技術硏究所 論文報告集 Vol.22 No.2
Experiments and numerical analysis has been carried out for improvement and development of small hot water pump. The selection of pump for bench marking has been made among the products currently in use. The performance curve with the related properties with respect to volumetric flowrate has been obtained by experiment and compared with numerical analysis using FLUENT/UNS. A comparison with experiment and numerical analysis shows that the results of numerical analysis are represented to be quite good with those of experiments, and numerical analysis can be utilized as a good tool for prediction of pump design changes. Parametric studies in terms of space between impellar and casing, diffuser aspect ration, number and shape of impellar are also presented on the pump performance.