http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박정재,구자용,김병선,Park, Jung-Jae,Ku, Cha-Yong,Kim, Byung-Sun 한국공간정보학회 2007 한국공간정보학회지 Vol.15 No.1
토지피복도는 지표면의 상태를 나타내는 자료로 특히 환경 분야에서 지역의 현황을 파악하고 정책을 수립하기 위한 기초적인 자료이다. 토지피복도를 효과적으로 제작하기 위해서는 인공위성을 이용하여 한 지표면 현황에 대한 정보를 신속하게 수집하고, 이를 지리정보로 변환하여 구축하고 관리하여야한다. 본 연구에서는 우리나라 환경부에서 구축한 중분류 토지피복도의 제작과정을 검토하고, 이를 객관적이고 구체적으로 개선하고자 한다. 이를 위하여 국내외의 토지피복도 제작 현황과 문제점을 파악한 후, 중분류 토지피복도를 제작하기 위한 구체적이고 효과적인 개선방안을 제시하였다. 본 연구에서 제시한 경계선 설정기준과 속성정보 부여기준은 기존의 토지피복도 제작과정에서 나타난 문제점을 보완할 수 있었다. The land cover map represent the state of earth surfaces. It can be used as basic data to explore present conditions of earth surfaces and develop future plans for local areas. To produce the land cover map with efficiency, gathering geographic information from satellite images is important. Exporting, building, and managing processes on the land cover information are needed as well. In this study we aim to review the producing process of the level-2 land cover map in detail and enhance it. h present status of the producing process of the land cover map in Korea is reviewed, problems of the process are explored, and measures for improving it are proposed. The criteria for fixing boundaries and providing attributes for the land cover map are proposed. This proposed criteria may solve problems in a present producing process. The improving measures proposed in this study should be continuously revised in future studies.
공초점 원리와 광섬유 광원 변조를 이용한 무한보정 현미경 자동초점
박정재,김승우,이호재,Park, Jung-Jae,Kim, Seung-Woo,Lee, Ho-Jae 한국광학회 2004 한국광학회지 Vol.15 No.6
비전을 이용한 광학식 검사공정이나 그 밖의 광학 현미경을 이용한 측정에 있어서 초점조절은 곧바로 측정 정밀도에 영향을 주는 중요한 요소이다. 본 논문에서는 핀홀 대신 광섬유를 사용하는 공초점 현미경 구조와 하나의 광섬유가 광원과 검출기의 역할을 동시에 수행하는 상반구성(reciprocal scheme)을 적용함으로써 간결하게 시스템을 구성하면서 광축 정렬을 용이하게 하였으며, 압전소자(PZT)를 이용한 광섬유 광원의 광축 방향 변조를 통해 방향 정보가 실린 초점오차 신호를 획득함으로써 빠른 초점조절을 구현하였다. 대물렌즈 변조방식과 달리 광원 변조방식은 현미경 시스템에 미치는 물리적 영향을 줄일 수 있으며, 기존의 장치에 탑재가 비교적 용이하다는 장점을 갖는다. 본 논문에서는 변조 진폭과 시편의 반사도 및 기울기 변화에 따른 초점오차 신호의 변화를 측정하였으며, 거울 시편에 대한 초점조절을 통해 본 시스템의 성능을 평가해 보았다. 또한 종방향 특성곡선의 반치폭 비교실험을 통해 광원 변조는 광축 방향 분해능에 영향을 주지 않음을 확인하였다. The autofocus is one of the important processes in the automated vision inspection or measurements using optical microscopes, because it influences the measuring accuracy. In this paper, we used the confocal microscope configuration based on not a pinhole but a single-mode optical fiber. A single mode fiber has the functions of source and detector by applying the reciprocal scheme. As a result, we acquired a simple system configuration and easy alignment of the optical axis. Also, we embodied a fast autofocus system by acquiring the focus error signal through a source modulation technique. The source modulation technique can effectively reduce physical disturbances compared with objective lens modulation, and it is easily applicable to general optical microscopes. The focus error signal was measured with respect to the modulation amplitude, reflectance of the specimen and inclination angle of the measuring surface. The performance of the proposed autofocus system was verified through autofocusing flat mirror surface. In addition, we confirmed that source modulation rarely degrades the depth resolution by the comparison between the FWHMs of axial response curves.
Numerical study on the effects of nozzle geometry and substrate location in the supersonic flow
박정재(Park, Jung Jae),윤석구(Yoon, Suk Goo),김호영(Kim, Ho Young) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.06
This paper deals with the simulation of solid particle coating technology via supersonic nozzle in vacuum environment to devote as an aerosol-deposition device. In order to improve efficiencies of nozzle and coating process, effects of shockwave, nozzle geometry, and substrate location were studied computationally under a fixed chamber pressure of 0.01316 bar which is nearly vacuous. Shockwave is the important factor affect to entire flow because shockwave in the jet flow dissipates the kinetic energy of the flow in the supersonic condition. Results show that various nozzle geometries have significant effect on the supersonic flow and we know that the supersonic nozzle should be optimized to minimize the loss of the flow. Another parameter, the distance between substrate and nozzle tip, shows little effect in this study.