http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Intelligent Adaptive Active Noise Control in Non-stationary Noise Environments
무향빈,고진석,임재열,Mu, Xiangbin,Ko, JinSeok,Rheem, JaeYeol The Acoustical Society of Korea 2013 韓國音響學會誌 Vol.32 No.5
능동소음제어에서 널리 사용되는 FxLMS 알고리즘은 비정상 잡음환경에서 불안정하게 동작하는 경우가 있다. 이와 같은 문제를 해결하기 위하여, Sun과 Akhtar는 FxLMS 알고리즘의 갱신 과정에서 기준신호를 수정하는 방법을 제안하였다. 그러나 이들의 방법은 임펄스 노이즈가 발생할 경우 만족스러운 안정성을 보여주지 못하였다. 본 논문에서 제안된 알고리즘은 확률추정과 영교차율을 이용하여 능동소음제어의 안정성과 성능을 개선하였다. 또한 최적의 파라미터 선정을 위하여 퍼지 추론을 사용하였다. 제안된 방법의 실험결과 비정상 잡음환경에서 기존의 방법에 비하여 우수한 안정성과 빠른 수렴속도를 보여줬다. The famous filtered-x least mean square (FxLMS) algorithm for active noise control (ANC) systems may become unstable in non-stationary noise environment. To solve this problem, Sun's algorithm and Akhtar's algorithm are developed based on modifying the reference signal in update of FxLMS algorithm, but these two algorithms have dissatisfactory stability in dealing with sustaining impulsive noise. In proposed algorithm, probability estimation and zero-crossing rate (ZCR) control are used to improve the stability and performance, at the same time, an optimal parameter selection based on fuzzy system is utilized. Computer simulation results prove the proposed algorithm has faster convergence and better stability in non-stationary noise environment.
Performance improvement of a quiet zone using multichannel real-time active noise control system
무향빈,고진석,임재열,Mu, Xiangbin,Ko, JinSeok,Rheem, JaeYeol The Acoustical Society of Korea 2016 韓國音響學會誌 Vol.35 No.3
3차원 잡음환경에서 정숙공간은 현실적으로 매우 중요한 문제이다. 본 논문은 3차원 잡음 환경에서 정숙 공간의 성능을 크기와 소음제거 면에서 향상시키는 다채널 실시간 능동소음 제어시스템의 개발과 구현을 다루고 있다. 제안된 능동소음제어 시스템은 delay-compensated Filtered-X Least Mean Square (FXLMS) 알고리즘을 적용한다. 이와 같은 시스템의 실시간 적용을 위해서 TMS320C6713 DSP 프로세서 기반으로 설계되었다. 제안된 실시간 다채널 능동소음제어기의 성능평가는 100 ~ 500 Hz 범위의 다양한 잡음 환경에서 잡음제거를 수행하고, 정숙공간에서 음압레벨(Sound Pressure Level, SPL)측정하여 평가하였다. 실험결과는 정숙공간의 크기는 만족스러우며 최대 24 dB의 소음 감쇄가 성공적으로 생성된 것을 보여준다. Generation of a quiet zone in noisy environment is undoubtedly of considerable realistic significance. This paper describes development and implementation of a multichannel real-time active noise control (ANC) system for 3 dimensional noisy environment to enhance the quiet zone performance in terms of size and noise cancellation gain. The proposed ANC system employes a multichannel delay-compensated filtered-X least mean square (FXLMS) algorithm; its real-time implementation is designed in TMS320C6713 digital signal processor (DSP) board. The system is evaluated for cancelling various tonal frequency noises in the range from 100 to 500 Hz, and the performance is then illustrated by measuring the quiet zone in terms of sound pressure level (SPL) attenuation. Experiment results show that a quiet zone of quiet with satisfactory size and maximum 24 dB noise attenuation is successfully generated.
영교차율과 가우시안 혼합모델을 이용한 박막증착장비의 세라믹 히터 결함 검출
고진석,임재열,무향빈 한국반도체디스플레이기술학회 2013 반도체디스플레이기술학회지 Vol.12 No.2
Temperature is a critical parameter in yield improvement for wafer manufacturing. In chemical vapor deposition (CVD) equipment, crack defect in ceramic heater leads to yield reduction, however, there is no suitable ceramic heater fault detection system for conventional CVD equipment. This paper proposes a short-time zero-crossing rate based fault detection method for the ceramic heater in CVD equipment. The proposed method measures the output signal (Vpp) of RF filter and extracts the zero-crossing rate (ZCR) as feature vector. The extracted feature vectors have a discriminant power and Gaussian mixture model (GMM) based fault detection method can detect fault in ceramic heater. Experimental results, carried out by measured signals provided by a CVD equipment manufacturer, indicate that the proposed method detects effectively faults in various process conditions.
교육매체 활용 : 자동 시각 검사 시스템 기술훈련을 위한 라인스캔 카메라 기반의 실습장비 제작
고진석 ( Jin Seok Ko ),무향빈 ( Xiang Bin Mu ),임재열 ( Jae Yeol Rheem ) 한국실천공학교육학회 2014 실천공학교육논문지 Vol.6 No.1
자동 시각 검사 장비는 전 세계적으로 제조업 기반의 기업들의 공장 자동화 시스템의 주요 장비로 자리 잡고 있다. 반도체, LCD, 철강, 제지 등 다양한 분야에서 품질관리의 자동화를 위하여 필수적으로 활용되고 있다. 그러나 대학, 직업전문학교 등의 교육기관에서는 이에 대한 교육이 거의 이뤄지지 못하고 있다. 본 논문에서는 자동 시각 검사 시스템의 기술훈련을 위하여 라인스캔 카메라 기반의 자동 시각 검사 장비 교육을 위한 실습 장비에 대해서 다루고 있다. 제작된 시스템은 산업현장에 널리 사용되고 있는 X-Y stage 기반으로 구성되었으며, 영상의 픽셀해상도는 10-30 μm의 범위에서 가변적으로 조절 가능하다. 또한 조명구조에 따른 영상효과를 확인하기 위하여, 측면 직사조명과 동축조명을 장착하여 활용할 수 있도록 구성되어 있다. 이는 훈련자가 실습환경에서 다양한 조건들을 변경시키며 실습을 수행할 수 있음을 의미하며, 실제 제조 현장에서 활용되는 라인스캔 카메라 기반의 머신비전 시스템과 거의 동일한 기능을 수행하도록 제작되었다. The automated visual inspection system (machine vision system) for quality assurance is important factory automation equip-ment in the manufacturing industries, such as display, semiconductor, etc. There is a lot of demand for the machine vision engineers. However, there are no technical training courses for machine vision technologies in vocational schools, colleges and universities. In this paper, we present the implementation of line scan camera based equipment for technical training of the auto-mated visual inspection system. The training system consists of the X-Y stage which is widely used in machine vision industries and its variable image resolution are set to 10-30 μm. Additionally, this training system can attach the industrial illumination, either the direct illuminator or coaxial illuminator, for verifying the effect of illuminations. This means that the trainee can have a practical training in various equipment conditions and the training system is similar to the automated visual inspection system in industries.