http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
변동부하 공급을 위한 하이브리드 ESS의 연축전지와 리튬이온전지의 최적구성방안에 관한 연구
노대석,최성식,이후동,장병훈,김수열,Rho, Dea-seok,Choi, Seong-sik,Lee, Hu-dong,Chang, Byunh-hoon,Kim, Su-yeol 한국전력공사 2016 KEPCO Journal on electric power and energy Vol.2 No.1
현재 대부분의 도서지역에서는 태양광발전을 효율적으로 운용하기 위하여 대용량 연축전지가 많이 사용되고 있지만, 풍력발전의 도입, 축전지 교체로 인하여 리튬이온전지의 도입이 증가하고 있다. 따라서 본 논문에서는 기존에 많이 보급되어 사용되고 있는 연축전지와 리튬이온전지의 장점을 최대한 활용하기 위하여, 연축전지와 리튬이온전지용 하이브리드 ESS의 최적 운용평가를 할 수 있는 알고리즘을 제시하였다. 상기의 알고리즘을 이용하여 시뮬레이션을 수행한 결과, 각 전지의 도입비용과 운용비용이 최소화 되는 운용조건에서 최적구성비를 산출하였다. 이에 따라 본 논문에서 제안한 하이브리드 ESS의 최적구성 알고리즘에 대한 유용성을 확인하였다. The large scaled lead-acid battery is widely used for efficient operation of the photovoltaic system in many islands. However, lithium-ion battery is now being introduced to mitigate the fluctuation of wind power and to replace lead-acid battery. Therefore, hybrid ESS (Energy Storage system) that combines lithium-ion battery with lead-acid battery is being required because lithium-ion battery is costly in present stage. Under this circumstance, this paper presents the optimal algorithm to create composition rate of hybrid ESS by considering fixed and variable costs in order to maximize advantage of each battery. With minimization of total cost including fixed and variable costs, the optimal composition rate can be calculated based on the various scenarios such as load variation, life cycle and cost trend. From simulation results, it is confirmed that the proposed algorithms are an effective tool to produce a optimal composition rate.
태양광발전이 연계된 배전계통의 보호기기 오동작에 대한 최적 운용방안에 관한 연구
김찬혁(Chan-Hyeok KIM),박현석(Hyeon-Seok Park),노대석(Dea-Seok Rho),신창훈(Chang-Hoon Shin),윤기갑(Gigab Yoon) 대한전기학회 2009 전기학회논문지 Vol.58 No.8
Recently, new dispersed power sources such as photovoltaics, wind power, fuel cell etc. are energetically interconnected and operated in the distribution systems, as one of the national projects for alternative energy. This paper deals with the optimal countermeasures for the mal-function of protective devices at primary feeder in distribution systems when new power sources like photovoltaic (PV) systems are interconnected, based on the symmetrical components of short circuit studies. When new power sources are considered to be interconnected to distribution systems, bi-directional power flow and interconnection transformer connection of new power sources may cause the operation problems of protective devices (mainly re-closer), since new power sources can change typical characteristics of distribution systems. Therefore, this paper shows an analysis skill of the mal-functional mechanism of protective relay and proposes the optimal solution for the mal-function problem using the symmetrical components of fault analysis. And, this paper also shows the effectiveness of proposed method by the simulation at the field distribution systems.
Electromagnetic Transient and Harmonic Simulation for Power System Including Converter System
왕용필(Yong-Peel Wang),한형주(Hyeong-Ju Han),김찬혁(Chan-Hyeok Kim),노대석(Dea-seok Rho) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
The complexity of modern power systems often makes it impractical to model it in its entirety for electromagnetic transient studies. Therefore areas outside the immediate area of interest must be represented by some form of frequency dependent network equivalent (FDNE). This paper presents z-domain rational function formulation and demonstrates the use of it for the assessment of the transient response of the Lower South Island of New Zealand. Moreover by using a well publicized test system and providing complete information on the developed FDNE coefficients, other researchers can easily benchmark their work against this.
김찬혁(Chan-Hyeok Kim),왕용필(Yong-Peel Wang),한형주(Hyeong-Ju Han),박수영(Soo-Young Park),노대석(Dea-Seok Rho) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 태양광 전원의 운용효율을 향상시키고, 제조원가를 절감시키기 위하여 태양광전원용 고효율 전력전송장치를 설계안을 제시하고자 한다. 이 장치는 하드웨어와 소프트웨어 장치의 조합으로 구성되는데, 하드웨어 장치는 전력손실과 발전효율을 악화시킬 수 있는 정상상태의 전압품질, 태양광 전원이 연계되어 운용되는 경우 계통의 지락 및 단락사고시 사고전류 크기 변화에 의한 보호기기 오· 부동작 문제점 그리고 태양광 모듈의 경년열화로 인한 출력량 감소 등을 해결할 수 있다. 또한 소프트 웨어 장치는 LabVIEW와 Autobase를 이용하여 전력전송장치의 구성기기에 대한 맞춤형 자동설계 및 태양광 모듈 열화진단용 프로그램을 사용하여 모듈의 이상 유·무를 판단함으로써 열화 및 고장으로 인한 출력손실을 줄여, 전체적인 운용효율 향상과 원가절감을 할 수 있다.