http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Stacked Interleaved 방식의 50㎒ 스위칭 주파수의 벅 변환기
김영재(Youngjae Kim),남현석(Hyunseok Nam),안영국(Youngkook Ahn),노정진(Jeongjin Roh) 대한전자공학회 2009 電子工學會論文誌-SD (Semiconductor and devices) Vol.46 No.6
본 논문에서는 인덕터와 커패시터를 집적화한 DC-DC 벅 변환기를 설계하였다. 출력전압의 리플크기를 줄이기 위해 stacked interleaved 방식을 이용하였고 변환기의 제어부는 전압모드 방식의 제어방법을 사용하여 설계하였다. 설계한 DC-DC 벅 변환기는 표준 0.5㎛ CMOS 공정으로 제작 중이며 전체면적은 9㎟이다. 설계된 회로는 3V∼5V의 입력전압에서 동작하며 LC 필터의 크기를 줄이기 위해 50㎒의 주파수로 동작하였다. 최대 250㎃의 부하전류 구동이 가능하며 최대 71%의 전력변환 효율을 가졌다. In this paper, DC-DC buck converter with on-chip filter inductor and capacitor is presented. By operating at high switching frequency of 50㎒ with stacked interleaved topology, we reduced inductor and capacitor sizes compared to previously published DC-DC buck converters. The proposed circuit is designed in a standard 0.5㎛ CMOS process, and chip area is 9㎟. This circuit operated at the input voltage of 3∼5V range, the maximum load current of 250㎃, and the maximum efficiency of 71%.
이동석(Dongsuk Lee),남현석(Hyunseok Nam),노정진(Jeongjin Roh) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.11
The voltage reference provides a constant voltage into an integrated circuit. Especially the voltage reference with regulated supply provides high PSRR(Power Supply Rejection Ratio). We propose the voltage reference with high PSRR, low supply voltage, simple architecture and low temperature coefficient.
휴대용 멀티미디어 기기를 위한 400㎃급 전류 방식 DC-DC 컨버터
허동훈(Donghun Heo),남현석(Hyunseok Nam),이민우(Minwoo Lee),안영국(Youngkook Ahn),노정진(Jeongjin Roh) 대한전자공학회 2008 電子工學會論文誌-SD (Semiconductor and devices) Vol.45 No.8
최근 휴대용 멀티미디어 기기에 있어서 파워 컨버터 블록이 매우 중요한 블록으로 부각되고 있다. 본 논문에서는 휴대 기기를 위한 고성능 DC-DC buck 컨버터를 설계하였다. DC-DC buck 컨버터의 컨트롤러에는 전류를 이용한 컨트롤 방법을 사용하였다. 설계된 전류 방식 DC-DC buck 컨버터는 standard 0.18㎛ 공정을 통하여 칩으로 제작 되었고, 전체 칩의 크기는 1.2㎟이다. 제작된 칩은 1∼1.5㎒의 주파수에서 동작 하였고, 최대 400㎃의 부하 전류를 구동할 수 있다. 또한 컨버터의 최대 변환 효율은 86%이다. Power converters are becoming an essential block in modern mobile multimedia application. This paper presents a high performance DC-DC buck converter for mobile applications. Controller of DC-DC buck converter is designed by current-mode control method. An current-mode DC-DC converter is implemented in a standard 0.18㎛ CMOS process, and the overall die size was 1.2㎟. The peak efficiency was 86 % with a switching frequency of 1∼1.5㎒ and a maximum load current of 400㎃.
1-비트 4차 델타-시그마 변조기법을 이용한 D급 디지털 오디오 증폭기
강경식(Kyoungsik Kang),최영길(Youngkil Choi),노형동(Hyungdong Roh),남현석(Hyunseok Nam),노정진(Jeongjin Roh) 대한전자공학회 2008 電子工學會論文誌-SD (Semiconductor and devices) Vol.45 No.3
본 논문에서는 휴대용 오디오 제품의 헤드폰 구동을 위한 델타-시그마 변조기법 기반의 D급 증폭기를 제안한다. 제안된 D급 증폭기는 고성능 단일 비트 4차 델타-시그마 변조기를 이용하여 펄스폭 변조 신호를 발생 시킨다. 높은 신호 대 잡음비를 얻는 것과 동시에 시스템의 안정성 확보를 위하여 시뮬레이션을 통해 변조기 루프필터의 폴과 제로를 최적화 하였다. 테스트칩은 0.18㎛ CMOS 공정으로 제작 되었다. 칩 면적은 1.6㎟ 이며, 20㎐ 부터 20㎑까지의 신호대역을 대상으로 동작한다. 3V 전원전압과 32옴의 로드를 사용하여 측정된 출력은 0.03% 이하의 전고조파 왜율을 갖는다. In this paper, we present the design of delta-sigma modulation-based class-D amplifier for driving headphones in portable audio applications. The presented class-D amplifier generates PWM(pulse width modulation) signals using a single-bit fourth-order high-performance delta-sigma modulator. To achieve a high SNR(signal-to-noise ratio) and ensure system stability, the locations of the modulator loop filter poles and zeros are optimized and thoroughly simulated. The test chip is fabricated using a standard 0.18㎛ CMOS process. The active area of the chip is 1.6㎟. It operates for the signal bandwidth from 20㎐ to 20㎑. The measured THD+N(total harmonic distortion plus noise) at the 32Ω load terminal is less than 0.03% from a 3V power supply.